What hardware performance can be mentioned in my computer to mention the best

Change three major motherboard CPU memory.

Your motherboard is estimated to be the largest supported P4So you can change the CPU to a P4 one. Because your motherboard is somewhat unreadable.

So it's the best choice. When you buy it, go to the computer and ask the boss to get you a P4 CPUThe specific models are all about the same.

You can find out more online. It is recommended to replace the memory with 1G DDR400Because yours is also the boss.

So 1G is the best option. 2G is a bit of a waste. And the old motherboard stuff is very expensive.

It is recommended to replace the graphics card with the 7300GT AGP version. Or the 6800GT AGP version. You don't need anything else.

If you have a hard disk, 120g Seagate is enough.

The above 3 pieces of hardware. I'll do the math for you.

cpu.Up to 150 to 180

The new memory is probably 250 to 280Because it's DDR400. Make no mistake. You can't use DDR2.

Graphics card** expensive. It's probably 300 to 350. Summing up. Do the math yourself.

Hehe. My set of configurations, the special effects in Red Alert 3 can run smoothly. I'm still p4 plus 1g RAM. 6600gt.Ha ha. We're all in the same boat. If you don't understand, I'll leave a message for you.

Big brother, this can be a science, if you can finish a sentence, then HP will not be so sassy (burning), and Tsinghua Tongfang will not just die. First of all, you have to see some bottlenecks, technical difficulties, and development directions for notebook development.

At present, a big bottleneck of the notebook is the problem of heating and heat dissipation, which affects the stability and life of the notebook in his eyes, and the better thing to do for the heating problem is ASUS and the previous IBM (the current thinkpad is made by Lenovo, not the same), of course, many friends are easier to ignore this problem, but when you suddenly use the machine to automatically restart or crash, you will feel it deeply (of course, many people now have air conditioning at home, so they will not be aware of it.) If you're playing games in an unair-conditioned room with an HP laptop, you'll find a serious problem.)

The definition of stability is almost literally understood, in addition to heat dissipation, it also has a lot to do with workmanship and laptop architecture (which is the main reason why Lenovo's ThinkPad is much cheaper than IBM's ThinkPad).

Then there's portability (which is just a very straightforward way to mention it), and you can find that the so-called notebook still has to rely on the power cord to be able to carry it everywhere, and the battery generally only lasts for 3 hours, which is not a real mobile platform. And many more.

Now let's answer what you said. The main thing you mentioned above is compatibility issues, which he won't have any major problems as long as it's a brand machine, and then you talked about hardware performance. If you install your own computer,Then it depends on your needs,For example, if you use AMD 245 processor,If you have a 785G motherboard, the compatibility problem does not exist,But the performance is definitely not as strong as the 890G motherboard,But for 890G245 is too inferior,But if you change the CPU, you will find that there is a better motherboard。。。

To put it bluntly, there is nothing best, but it doesn't meet your needs after meeting the compatibility problem (performance also depends on your investment, and the more you invest, the better the performance).

However, I have to say that some old chipsets can be compatible with the new CPU after a partial upgrade but cannot fully play the performance of the new CPU, and the same situation also appears in other components, so to make each component play a better performance, we have to try to make them all use the same level of technology, as well as the main line frequency, etc.

If the laptop's CPU core graphics card can be overclocked, overclock.

The drivers don't have to be up-to-date, but they should be the most compatible for your hardware.

Set the power modes to High Performance.

The graphics card has always been displayed by default.

If you want to add hardware and an SSD, the effect will be greatly improved.

Add a few more:

1.Then there is the heat dissipation of the laptop is a problem, it is recommended to buy a laptop radiator, and the cooling performance will be better.

2.There is also a way to see if the laptop's hard drive partition is 4k aligned. If not, format repartition 4k alignment.

3.Also, if the computer has not been cleaned for a long time, it will also affect the performance, it is recommended to clean the ash, and then change the graphics card and CPU to silicone grease.

The i3 processor is good with GT335 performance, but because the processor performance is too powerful, the graphics card is very good and too expensive, and it is best to use GT335, which is cost-effective.

Computer performance is the barrel effect, that is, which piece is the most inferior, that piece becomes the bottleneck of the overall performance, so if you want to maximize the performance, the first configuration should be balanced. In terms of software, choose the new version of the driver released on the official website, and do not use the driver wizard and other forum drivers.

Here are the steps:1Overclocking, this is more troublesome, that is, use a screwdriver and other tools to add wires or open cores on the CPU or graphics card components, but if you are a rookie, it is best not to do it, it will burn out if you don't get it right.

2.You can get a CPU accelerator on the Internet, and the effect can be fully on, but the CPU temperature will be very high, in order to reduce the temperature, it is recommended to install 2 case fans, one in the front and one in the back.

The performance of the computer is mainly determined by the hardware itself, but only when it is used in ordinary times, can it be better played by correctly installing drivers, antivirus, optimizing and organizing, installing patches, removing unnecessary startup items, etc!!

Performance is determined by the hardware itself.

Drivers, patches, systems, etc., are just to make it more performant.

It can be overclocked, and the system can also be optimized.

Whatever you want. However, I recommend a combination of overclocking and optimization.

The BIOS can be modified to improve performance!

Install a lite version of WindowsXP or Windows 2003