Does a natural gas wall hung boiler need to be connected to tap water? 50

Dual-function wall-hung boiler.

There will be a special place to connect to tap water, and the wall-hung boiler must be connected to the tap water to replenish the wall-hung boiler in order for the wall-hung boiler to work.

The gas wall-hung boiler is an advanced equipment that integrates the use of water, electricity and gas (fire) and can provide domestic hot water and independent heating, which is convenient to use and not affected by external factors. In recent years, it has been widely used in the domestic market. Due to heat conduction.

The actual operating cost of the wall-hung boiler has a close relationship with the construction, and the main influencing factors are the thermal insulation of the house, the thickness of the wall, the insulation material, the thermal insulation of the window, etc.

In the installation of gas wall-hung boiler, there are usually 4 water pipes connected to the gas wall-hung boiler, one of which is a tap water pipe and a domestic hot water pipe; One heating outlet pipe and one heating return pipe.

To be connected, the water in the floor heating pipe or radiator is lost, and the loss must be replenished to a certain extent, and the pressure display must be displayed on the gas wall-hung boiler, which is generally Pa, below this number will be manually replenished, and the pressure will jump back to Pa, if it is an automatic water boiler, then it only needs to be connected to the tap water!

To connect to tap water, there is a water connection on the stove. It depends on the stove to add water, and some furnaces are fully automatic, so you don't need to add water manually.

Of course, it is necessary to connect the tap water, or the water of the circulation system **.

The tap water is connected directly to the wall-hung stove with a water connection on it, which is generally 1 2".

Natural gasWall-hung boilerYou can drink tap water.

The use of domestic water for wall-hung boilers is by opening the triangular valve that supplies water to the natural gas wall-hung boiler by opening the tap water.

valve to supply water. If the inlet temperature of the tap water is too high, the water pressure booster pump is increased, or the tap water inlet angle valve is maximized, or the hot water outlet temperature is appropriately increased.

In fact, there is not much difference between the usual water quality and the addition of tap water or pure water in an independent floor heating system that uses an ordinary gas wall-hung boiler as a heat source. If it is a condensing ordinary gas wall-hung boiler as a heat source, it is better to add pure water to the floor heating system. If the water hardness.

In areas where it is too high, it is recommended to use purified water.

Precautions for natural gas wall-hung boilers.

1. During the rainy season.

Or even on rainy days, when the humidity is relatively high, the wall-hung boiler needs to be kept energized for a long time to protect the circuit board and water pump from damage.

2. The smoke exhaust pipe of the wall-hung boiler is outdoors, if you find that there is a serious odor at home when using the gas wall-hung boiler, check whether the window next to the gas wall-hung boiler is open, and if it is open, you need to close the window to prevent the exhaust gas from entering the outside.

3. The gas wall-hung boiler needs to be protected from freezing, and the wall-hung boiler should be kept energized and ventilated 24 hours a day in the winter season.

No. <>

First of all, natural gas and wall-hung boiler are not matching, wall-hung boiler is also one of the user's gas equipment, such as water heater and gas stove, etc., if any of your equipment needs gas, you can apply for access, ** air conditioning is air conditioning, can be heated in winter, can not replace the wall-hung boiler (water heater) bathing and cooking need hot water.

So according to your needs, if you want to use hot water, you can install a wall-hung stove, and then apply for natural gas to enter the household, if you want to use an electric water heater, including an induction cooker for cooking, you can also use natural gas.

Natural gas is a kind of gas, which produces heat after combustion, and the household equipment that can be connected to it can be connected is: gas wall-hung boiler: dual-system, one machine dual-purpose, heating + hot water can be provided in winter, and only hot water is provided in summer.

It is suitable for household heating (no central heating), and additional heating systems need to be installed, such as radiators, floor heating, fan coil units, etc.

Gas water heater: used to provide hot water (35-60) for bathing, vegetable sink, washbasin, etc. Gas stove: stove, used for home cooking: hot drinking water, cooking and frying and other meals.

Natural gas refers to all gases that exist naturally in nature, including gases formed by various natural processes in the atmosphere, hydrosphere, and lithosphere (including oilfield gas, gas field gas, mud volcanic gas, coalbed methane, and biogenerated gas, etc.).

The long-term common definition of "natural gas" is a narrow definition from the perspective of energy, which refers to a mixture of hydrocarbon and non-hydrocarbon gases naturally contained in the formation. In petroleum geology, it usually refers to oilfield gas and gas field gas. Its composition is dominated by hydrocarbons and contains non-hydrocarbon gases.

The water inlet switch under the wall-hung boiler should be turned off when it is usually in use, and only open when it is necessary to add water. As a heat source for independent heating in the home, the heating thermal efficiency of the wall-hung boiler can reach more than 90%, which is much higher than the thermal efficiency of using coal, oil, electric heating, air conditioning, etc. There is also no waste of heat loss and ineffective heat loss in boilers, pipes and other central heating boilers.

The wall-hung boiler is used for daily hot water bathing in the family, which is a modern form of bathing with constant temperature and large water volume. It is equivalent to a family bathing center, and its comfort and improvement of life quality are incomparable to ordinary water heaters, electric water heaters and solar hot water heaters.

Hello. Home expert Yingzi is happy to answer for you. Dear, no.

Because the application of natural gas can provide a heat source for kitchen cooking, before the installation of the wall-hung boiler, if you have the need for cooking, then you need ventilation to achieve, and you install the wall-hung boiler later, this does not matter, when the time is to re-open the wall-hung boiler to open up the gas source and the natural gas pipeline, and connect it through a three-way to achieve. But before doing this, be sure to close the gas valve. Hello, I hope my answer can help you.

If you have any questions, please ask me. Have a great day. If I can help you, you give a like, look forward to your like, dear, thank you.

Before replenishing water, open the exhaust valve of the wall-hung boiler and the radiator, and then open the water replenishment valve for water replenishment, pay attention to the exhaust hole on the radiator during the water replenishment process, if there is water flowing out, you can close the exhaust valve.

After the water replenishment is over, the water valve is mainly closed, and the limited user does not understand, and forgets to close the water valve after the water is replenished, resulting in the water flowing everywhere in the home. Most of the water replenishment valves of wall-hung boilers are above the inlet of tap water or between them and the water pump, which is a black knob, and you can replenish water by turning the knob.

The gas wall-hung boiler is prompted to add water every day, and in this case, the pipeline should be checked for leakage. In particular, some of the places where the pipes are connected as well as the heating package. These are all places that are prone to water leakage.

In addition, it is difficult to find the leakage point of the pipeline, which is more difficult to judge here, but there will also be clues.

It needs to be left open all the time. When the ignition switch of the wall-hung boiler enters the working state, the fan starts first to form a negative pressure difference in the combustion chamber, the wind pressure switch sends the command to the water pump, and after the pump starts, the water flow switch sends the command to the high-pressure discharger, and the command is sent to the gas proportional valve after starting, and the gas proportional valve starts to start.

Due to the existence of negative pressure in the combustion chamber, there is no aggregation and combustion of natural gas, so there will be no deflagration, and the calm ignition is ultra-silent, and the occurrence of dangerous accidents is avoided. Some customers are worried about gas safety because they do not understand the operation control principle of the gas proportional valve of the wall-hung boiler.

The gas proportional valve and the wind pressure switch and the flue gas induction switch are interlocked, and the combustion chamber has a certain negative pressure gas proportional valve to work, when the flue gas induction switch can not detect the exhaust gas discharge in 5 seconds, the gas proportional valve will be cut off to stop the gas supply, so as to ensure the safe use of gas.

No! When the tap water is turned on, the water heater ignites and starts heating, and there is hot water flowing out of the outlet pipe.

Yes, this one will do the trick.

It doesn't need to be switched on and off as often

The gas stove will automatically turn on the water.

Natural gas wall-hung boiler can bring convenient domestic hot water to the owner, so many owners will choose to install natural gas wall-hung boiler at home, if the natural gas wall-hung boiler wants to provide hot water, it also needs to add water, so how to add water to the natural gas wall-hung boiler? Let's find out together.

1. If you want to add water to the natural gas wall-hung boiler, then you must remember to open the exhaust valve of the natural gas wall-hung boiler and the radiator before adding water, and find the water replenishment valve at the bottom of the natural gas wall-hung boiler, and then the water replenishment valve should be rotated according to the counterclockwise direction, then the wall-hung boiler will automatically add water, and in the process of adding water, you can generally hear the sound of adding water.

2. During the water filling of the natural gas wall-hung boiler, we should carefully look at the value displayed by the pressure gauge on the wall-hung boiler. When the value in the air pressure gauge of the natural gas wall-hung boiler shows the above, it means that the natural gas wall-hung boiler has been filled with water, and the water replenishment valve should be closed and the water should be stopped.

3. The value of the barometer should be located to the left and right, generally not more than 2bar, if it exceeds this value, then it is easy to cause pressure relief and leakage of natural gas wall-hung boiler. When the value in the barometer is lower, it is generally possible to add water to the wall-mounted brother brigade furnace.

4. Before adding water to the natural gas wall-hung boiler, it should be determined that the water supply of tap water at home is normal, because it is difficult to add water to the wall-hung boiler during the water outage or when the temperature is very low. When the water is finished, be sure to close the water refill valve in time, otherwise the water will flow everywhere. The valve can be closed by rotating the switch of the water supply valve in a clockwise direction.

Natural gas wall-hung boiler is a very practical hot water device, very simple to operate, so it is very popular with consumers, the above is a detailed introduction to how to add water to natural gas wall-hung boiler, I hope to help friends who need to use natural gas wall-hung boiler.