Understand the computer master to help the computer master online consultation

That's what I'll tell you.

This is too general, and I didn't write what brand or model I did!

You have to know that the price difference between different brands of the same P45 motherboard can be in the range of 200-300.

There is no sign written in the memory.

I mean, 96 on the graphics card is still ok.

Or 3870's will do.

If the CPU has money, use that.

If you don't have any money, use AMD 5000+

Memory wants a first-line brand Kingston or something, as long as it's not a parallel import, it's just a few dozen dollars with the second-tier brand, but fortunately, it should be acceptable.

Good advice from your friend. It is better to use ASUS for the motherboard. GraphicsGF9200 (512 VRAM).

CPU: AMD 64 3200+ Intel Pentium 4 or higher.

Memory: 512MB RAM (XP) and 1GB RAM (Vista).

Hard disk: 8 GB

Graphics card: Support Shader, 256MB video memory, NVIDIA GeForce 6600GT or ATI Radeon 1600XT or above.

This is the basic configuration of Call of Duty 5, and you can watch it upgrade.

It is recommended to spend the least amount of money to play this game. It's a piece of P4 that is looking for a piece of the second-hand market.,In fact, the game doesn't have high CPU requirements.,You can try it with your CPU first.。 It is enough to change the CPU and make up the price difference of 50 yuan.

Because your current 6200 is a PCI E graphics card, you can upgrade to the current new graphics card, it is recommended to buy a graphics card above 9500GT, 9500GT is about 400 yuan. Memory can buy a second-hand 512, about 100 yuan, a total investment of 550 yuan, should be able to play this game.

The key is to upgrade like this,It's not cool to play the game.,Your newly bought graphics card won't be wasted.,It's really not possible to install a new machine and use it.,In fact, only invest 150 yuan.,You can give it a try.。

Summary. Please describe your problem more specifically and explain it to the teacher in detail, so that the teacher can better help you.

Please describe your problem more specifically and explain it to the teacher in detail, so that the teacher can better help you.

AMD's RX580XT is playing games on the screen.

Graphics card failure During the use of the computer, the sound is very normal, the monitor suddenly does not display, and sometimes even the screen is blurred, which should be considered as a problem with the graphics card. The solution is to use an eraser to wipe the golden hand or finger part, and use a brush or other tools to remove the dust on the graphics card, which can generally be solved.

**Internet café version of the AMD driver, this noisy class driver introduction is lightweight, removing a lot of bells and whistles. For the problem of falling off the driver cover bend bush,Sakura solves the better amdwbqdwin7 This version, friends in need can search for the corresponding version of the AMD Internet café driver version,Mine is the win7 version。

Software:1Driver compatibility asks questions; 2.

system or software compatibility issues; 3.The game program asks the question. Hardware:

1.Poor contact with the graphics card; 2.power supply issues; 3.

Unstable overclocking; 4.compatibility issues with the motherboard and graphics card; 5.The graphics card temperature is too high; 6.

The graphics card itself is a problem with the clan.

It's such a blurred screen.,If it's a problem with the graphics card itself, can it be repaired?,How much does it cost.。

Hello, this one is going to a professional computer repair point to ask a professional.

Hello, by the way, is it recommended to buy second-hand ones for solid state and memory?

Ask about custom messages].

Hello, you can buy brand new if you can afford it.

There are pitfalls associated with second-hand SSDs.

What about memory. Memory, yes.

Okay thank you.

Summary. 1. When the host is in standby, the power indicator will also be flashing, at this time, generally wake up the computer by pressing the keyboard or moving the mouse, if the keyboard and the mouse can not wake up the host, you need to press the power on/off key, then you can wake up the host, through this operation still can not wake up the host, try the second step. 2. It may be caused by the system not responding and feigning death, at this time, you need to press the power switch button for up to ten seconds to completely shut down the host, and then try to restart the machine to see if the fault is solved.

3. The problem of failure still exists, which may be caused by the instability of the power supply voltage, and observe whether other electrical appliances can work normally. The cause of the voltage is ruled out. 4. The host cannot be turned on due to loose memory, cut off the power supply of the host, try to unplug the memory module of the host, wipe the gold finger with an eraser, and after reinstallation, turn on the machine to observe whether the fault is solved.

1. When the host is in standby, the power indicator will also be flashing, at this time, generally wake up the computer by pressing the keyboard or moving the mouse, if you can not wake up the host by pressing the keyboard and the mouse front standard, you need to press the power on/off key, then you can wake up the host, through this operation still can not wake up the host, try the second step of Yinyou. 2. It may be caused by the system not responding, feign death, this grinding, you need to press the power switch button for up to ten seconds, so that the host is completely shut down, and then try to reboot to see if the fault is solved. 3. The problem of failure still exists, which may be caused by the instability of the power supply voltage, and observe whether other electrical appliances can work normally.

The cause of the voltage is ruled out. 4. The host cannot be turned on due to loose memory, cut off the power supply of the host, try to unplug the memory module of the host, wipe the gold finger with an eraser, and after reinstallation, turn on the machine to observe whether the fault is solved.

Dear: What's going on?

I started the attack machine and clicked on a game, and then it froze, and then I couldn't order anything, and it just froze, and I unplugged the power source and turned it on again, and it became this god-like look.

This is the entry to the b r o s interface.

The person just needs to click and f 10 to exit.

This is normal, because it is a forced unplugging, so this kind of interface will appear.

Summary. Common problems and faults with computers.

1. Reasons why the computer can't start 1. The system does not recognize the hard disk This kind of failure is more common, that is, it cannot be started from the hard disk, and it cannot enter the C disk from the A disk, and the existence of the hard disk cannot be found by using the automatic monitoring function in CMOS. Most of these faults appear on the connection cable or IDE port port, the failure rate of the hard disk itself is very small, and the fault can be quickly found by reinserting and unplugging the hard disk cable or replacing the IDE port and cable. If the newly connected hard disk is not recognized, there is also a common reason is the master-slave line on the hard disk, if the hard disk is connected to the main disk position of the IDE, the hard disk must jump to the main disk shape, and the jumper error generally cannot detect the hard disk.

Common problems and faults with computers.

1. Reasons why the computer can't start 1. The system does not recognize the hard disk This kind of fault trap is more common, that is, it cannot be started from the hard disk, and it cannot enter the C disk from the A disk, and the existence of the hard disk cannot be found by using the automatic monitoring function in CMOS. Most of these faults appear on the connection cable or IDE port port, the failure rate of the hard disk itself is very small, and the fault can be quickly found by reinserting and unplugging the hard disk cable or replacing the IDE port and cable. If the newly connected hard disk is not recognized, there is also a common reason is the master-slave line on the hard disk, if the hard disk is connected to the main disk position of the IDE, the hard disk must jump to the main disk shape, and the jumper error generally cannot detect the hard disk.

2. Failure caused by CMOS The correctness of CMOS directly affects the normal use of hard disk macros, which mainly refers to the type of hard disk. Fortunately, today's machines support the "IDE Auto Detect" function, which automatically detects the type of hard drive. When you connect a new hard disk or replace a new hard disk, you need to use this function to reset the type.

Of course, there are now types of motherboards that automatically recognize the type of hard drive. When the hard drive type is wrong, sometimes the system simply fails to boot, and sometimes it does, but read and write errors occur. For example, if the disk type in CMOS is less than the actual disk capacity, the sectors behind the disk will not be able to read and write, and if it is in a multi-partition state, individual partitions will be lost.

There is also an important cause of failure, because the current IDE supports logical parameter types, the hard disk can use Normal, LBA, Large, etc. If data is installed in normal mode and then changed to a different mode in CMOS, a hard disk read and write error will occur because its physical and geological mapping has changed, and the original correct disk location cannot be read. 3. The boot sector of the hard disk is the most sensitive part of the hard disk, in which the main boot program is a part of it, this program is mainly used to detect the correctness of the hard disk partition, and determine the active partition, responsible for handing over the boot right to the active partition of the DOS or other operating systems.

This section of the program is corrupted and will not boot from the hard disk.