Anyone who understands computers and English, helps

The system has detected an error and Windows has been shut down to protect your computer.

The driver version is incorrect.

If this is the first time you've seen this error, restart your computer. If you have a new hardware installation, ask the hardware manufacturer for the required Windows updates. If the problem persists, disable or remove any newly installed software or hardware devices.

Disable memory settings such as cache or latency in the BIOS. If you need to use Safe Mode to remove or disable it, restart your computer and press F8 to select Advanced Startup Settings, then select Safe Mode.

Technical information: **stop:0x000000d1(0x00000000,,0x00000000).

Since there is a problem when Thunderbolt is down, it is likely that the hard disk has a bad sector. An error occurs when performing a disk write operation in the bad sector area, which then results in a system blue screen.

Countermeasure. 1: First of all, confirm whether the problem is caused by insufficient disk space. If so, clear the disk space to allow enough space for the disk.

2: Find the tddownload folder of Thunderbolt, see which disk partition it is in, and then use this disk partition under other large software, or use other files to fill the partition. If the problem recurs, it is a bad sector of the hard drive.

3: Send to the computer city for maintenance.

RAM or graphics card.

Usually it's a memory issue.

Unplug the memory and wipe the memory slot.

If it doesn't work, it may be that one of your memory is broken.

One by one, you can only try.

If a problem is found, the operating system will shut down to prevent damage.

If this is the first time you see this error screen, restart your machine;

If this screen still appears, you should make sure that some of the newly installed software or hardware in your machine is installed correctly, and if necessary, ask the manufacturer of the software or hardware if it has been updated.

If the error still continues, disable or remore any rewly installed hardware or software ? (Disable or uninstall newly installed software or hardware).

Disable BIOS settings such as cache and copy, restart the computer, press F8 to enter advanced boot options, select Safe Mode to enter.

It is recommended to redo the system.

0x000000d1 is a memory reference error, which leads to many cases of such an error, in addition to the failure of the memory itself into the quality, overheating, instability, super quality, etc., some equipment driver conflicts, competition, etc. will also lead to its appearance, including the following third-party software such as system backup, one-click restore, etc.

To solve such a problem in detail, it is necessary to consult Microsoft's knowledge base, as well as a certain depth of expertise. Simple solutions can be done by eliminating and replaceing, such as disabling or uninstalling some potentially conflicting devices and software to see if the fault is eliminated; update drivers; Or try to replace the hardware device of the memory module or graphics card.

Device interrupt error. There is a memdump but there is no detailed debug info, look at the memory or hard disk.

Boot press f8 to see if Huai Mo can enter the safe mode If you can enter the hall, it means that the system is no problem It may be that the newly installed software has a conflict or a new patch with a lead rise problem No, they can uninstall it.

Has the hard disk connection in your BIOS been changed to an IDE? If it's xp. Or to be more specific. What system, what situation.

Do you see if the program in the system32 folder in the C drive is still there?

Restart the computer and press the F8 key to enter the safe mode, and select the last correct configuration to take a look.