How to bypass authentication when you boot up and go directly to the desktop

I just looked at how to do it.

is doable. Step 1: Run the registry, then the [hkey local machine software microsoft windows nt currentversion winlogon] branch, then double-click on "defaultusername" on the right window, and then enter your login username.

If you don't have a preset username, you can add this item by clicking "New String Value(s) defaultusername" in the menu bar of the registry, noting that it is case-sensitive.

Step 2: Also under this branch, double-click on the "defaultpassword" subkey in the right window of the registry and enter your password in the blank field.

Step 3: Next, double-click on "autoadminlogon" in the right window and set the value to "1". Now close the registry and restart the computer, and later you will find that annoying login is gone.

Quoted from:

It's basically a dead end, no password, basically no other attempts to pull.

No, unless you use a hard drive or a virus.

Hehe. Ctrl+Alt+Del try.

It should work.

Enter cmd under the command line, and then enter control userpasswords2, a window will appear, as shown in the figure, in order to use the machine, the user must enter the user name and password on the box in front of the check mark to remove the check number, restart the computer, and go directly to the windows desktop.

Find the control panel at the beginning, select the user account in it, and delete the user account.

This is the case with Windows XP, and it is recommended that you reinstall the operating system.

Simply cancel the non-admin account.

hkey_local_machine\software\microsoft\windows nt\currentversion\winlogon]

defaultusername"="administrator"

defaultpassword"=""

autoadminlogon"="1"

autoadminlogon"="1"The item indicates automatic login, so that there will be no prompt to select the user to enter the password when logging in. "defaultpassword"=""Of course, enter the correct password. "defaultusername"="administrator"Enter the username you want to log in to by default.

Press Start once, press Console again, and then press User Account twice.

Click [Change User Login or Logout Method].

Click once to select [Use Quick User Toggle] to check the block.

Click [OK].

You haven't figured it out, but it's definitely possible.

Find the control panel inside the start. Then look for user management and check if you don't have an account first.

Or select "Change how users log in or out" and tick the "Use Welcome Screen" checkbox. Not yet, even the next one is clicked and tried to restart again.

Or right-click on the online neighbor selection property, and then right-click on the local connection to see if the error file is running.

Then there's the registry, and I'm not going to repeat it when the upstairs one says it clearly.

If these have been tried, then think about when you started, whether you were running or installing any software, or updating what system such as windows (this thing was very cheap in the past few years), if so, you can uninstall it, or restore the system, or reinstall the system (it is recommended not to use this, files will be lost), if it still doesn't work, then you can only find someone to fix ......

Windows boots quickly, no need to log in, boot directly into the desktop.

1. Click Start - Control Panel - User Account.

2. Click Change User Login or Logout Method in the User Account window.

3. In the pop-up window, remove the check box for using the welcome screen option, and you can log in without entering the user and password.

1.On the welcome screen of the login, the administrator account is displayed, click "Start Run", enter regedit, press Enter, open the registry, and then "hkey local machine softwareMicrosoft Windows NT CurrentVersion Winlogon specialaccounts userlist" branch, Change the value of Administrator to 1 on the right to have the Administrator account appear on the welcome screen when you log in.

2.Automatically log in to the administrator account, click "Start Run", enter control userpasswords2 and press enter, remove the check box before "To use this machine, the user must enter the password" in the "User Account" window that opens, press "Apply", enter the administrator account password (as shown in Figure 1) in the pop-up "Automatic Login" window, and press "OK" twice. Note:

If you have already set up automatic login for other accounts, you should first select the checkbox before "To use the machine, the user must enter a password", press "Apply", and then remove the selected checkbox. It is also possible to modify the registry to achieve automatic login, but it is not as convenient as the above methods.

The steps are as follows:

1. Turn on the computer and enter the desktop;

2. Right-click on the blank space of the "Taskbar", and select Properties in the pop-up page.

3. Under the page of Properties, find the option When I log in and close the app on the screen, go to the desktop instead of the "Start" screen, and click OK;

4. Scroll down the mouse, find OK, and click it.

Click to enter because you have two accounts, which restricted account do you delete, delete the account and start the computer again.

If there is only one user on the machine, it will go directly to the desktop. Go to the Control Panel - User Accounts and delete any redundant restricted or guest accounts.

I have XP on my computer

sp2,Two days ago, every time you could directly enter the desktop,But for some reason,Now every time you turn on the phone, you have to click on the user,You can enter the desktop,Even when the screensaver is automatically returned to the user interface (in fact, I'm a user in use.,There's no other option.,But you just have to click on this to enter and feel troublesome),Please tell me what to do?

Supplement 12007-08-25

I've tried the following methods, but I'll still return to the welcome screen when I haven't operated the computer for a while, and then click on the username to enter, and I don't need to enter the password.

Supplement 22007-08-27

I've also seen a tick in the Control Panel - User Account - Change how users log in or out - Use Welcome Screen - App options, but it still does.

Start - Run - Enter control userpasswords2 - Remove the check box in front of "To use this machine, the user must enter a username and password".

(⊙o⊙)…There are two ways to do this.

One method is more complicated, but it can help you fully grasp how to set up Windows 2003 automatic login. First, click "Start Running", type "regedit" in the input box to open the registry, then click "hkey local machine software Microsoft Windows NT Current Version Winlogon" in the left console of the registry, then select "Add string value", and type "autoadminlogon" in the numeric name. Then click on the blank space in the window, and then double-click the newly created string "autoadminlogon", and enter "1" in the pop-up "string" dialog box to set the system to allow automatic login. Repeat the above to create a string named "defaultusername", which is the name of the account you want to use for automatic login.

Create a new string value named "defaultpassword", and the string is prepared for you to use the user account password for automatic login, after checking that it is correct, close the registry and restart the computer to automatically log in. Note that if you already have defaultusername, you can change the original string value without creating a new one. If your system works in a LAN environment and you need to log in to a domain server when logging in to the system, you also need to add a "defaultdomainname" string to the domain name you are logged into.

The other method is simpler, you just need to click "Start Run" and type "control userpasswords2" in the input box, so that you can clear the selected state of the "To use this machine, the user must enter a password" checkbox in the "User Account" management window, and then press "Ctrl+Shift+A" on the keyboard, you will get a "Auto Login" setting dialog box (as shown in Figure 2), You can set up the user account and password that the system uses automatically when the computer starts, according to your needs.

Click on the third option: change the way the user logs in or out - select both.

Go to the Control Panel, User Accounts, delete all accounts except your own, and deactivate guest accounts.

Control Layout User Account Change Password Enter Original Password New Password is Empty OK After that, the system can go directly to the desktop.

Don't set a password, it's fine.

Control Panel - User Accounts - Change the way you start and log out, try it:

and type "control userpasswords2" in the input box to set up automatic login.

When you log in to your computer, there are two users, one is the administrator and the other is something else, in that case, you can go to Start--Settings--Control Panel--User Account, and delete the redundant support! If you manage the Gary password, you can also delete the password here.

Black roses.

If you use two or more passwords, or if you have a password, this is normal, log in to the administrator control panel, in user management, disable others, if you have a password, remove the password, and then start again.

This means that you have set up your account, and you can delete the user account of the computer if you want to go in directly.

Control UserPasswords2 to implement WinXP automatic login.

Is it too much of a hassle if you have your own computer and use the same username every time (or you don't even care what a username is) and have to enter your password every time?

Maybe you don't have to enter a password, but the reason is "no password". For users who are on the LAN or often connected to the Internet, there are great security risks. It is recommended to set a password and use this method to log in automatically.

Method: Start the Run input (without quotes)."control userpasswords2"Enter. In the "User account" that appears, select "To use the machine, the user must enter a user name and password", OK.

In the Automatic Login dialog box that appears, enter the default items and OK. You can log in automatically the next time you start up your computer.

There is also a method, hkey local machine software\Microsoft\Windows\NT\CurrentVersion\Winlogon].

autoadminlogon"="1"

defaultusername"="Enter the desired username here"

defaultpassword"="Enter the password you use here"

The control userpasswords2 method is just an interface, and it should actually be written to the registry (you can see the interaction between the "must enter password" and the "autoadminlogon" item by checking the box.) But the strange thing is that after using the control userpasswords2 method, there is no defaultPassword key in the registry? I don't know why?

However, it may be better to have no plaintext password.

In addition, there are: