-
Anonymous users2024-02-08First put in the coin, and then move the long stick to grab the grip of the crane machine, you have to control the speed and strength, not too fast and too strong. The button next to it is pressed when you decide where you want to clip the doll. Of course, this requires skill, I hope it can help you.
-
Anonymous users2024-02-07The method of catching the crane machine is: the clamp is a little off, so that the lead is on the doll's head with one claw, and the other two claws grasp the doll's body obliquely, and the doll will be caught after the clip is withdrawn.
The claw machine is a very popular game machine, which is simple to operate and has strong leisure and entertainment, so it is deeply loved by the majority of tourists. However, due to factors such as the clamping force of the clips and the size and weight of the doll, it is not an easy task to successfully catch the doll. The following are some common methods and techniques for grabbing crane machines, I hope they will be helpful to you.
First of all, it is necessary to accurately estimate the position of the clip. Before playing with the claw machine, carefully observe the position and state of the doll in the machine, and then adjust the position of the clamp and rocker according to the size, shape, and placement of the doll, and choose the best gripping position.
Secondly, it is necessary to use clips flexibly. The clamping force and gripping method of the clip is one of the main factors affecting the success rate of grabbing the doll. Generally speaking, the clip falls a little off, so that one paw is on the doll's head, and the other two paws grasp the doll's body diagonally, and the doll will be caught after the clip is withdrawn.
In addition, it is also possible to change the direction and position of the clamp several times during the clamp descent in order to better clamp the doll further.
Third, find the right time. Most of the dolls in the crane grabbing machine are movable, so when the exact position of the clip is about the same as the position of the clip, you also need to control the descent time, speed and strength of the clip through the rocker, and grab the doll according to your own feelings and experience.
Finally, patience and skill are required. The success rate of the claw grabbing machine is not high, and sometimes it takes a lot of time and effort to invest, and it may not be successful. Therefore, when operating the crane machine, you need to have patience and skill, learn and explore a lot, slowly accumulate experience and keep trying different techniques and methods.
The key point of catching the doll
In order to successfully catch a doll, you need to have many skills and methods. Understanding the clamping force and gripping method of the clamp, using the clamp and rocker flexibly, finding the right timing, and paying attention to patience and skill are the key skills that need to be mastered in the operation of the crane machine. Through continuous trial and learning, I believe that everyone will be able to improve their success rate and get more fun and experience from the crane machine.
-
Anonymous users2024-02-06The strategy of catching the crane machine is as follows:
1. First of all, it depends on the quality of the doll in the machine, whether you like it or not. A doll with a high value must need a little more coins to invest once, so the cost of re-investment has also increased. At first, try how strong the claws are inside the machine, and then choose the doll near the hole as the target to decide whether you stay on the machine or not.
2. After selecting the target, start to grab the doll, according to the principle of proximity to grasp the doll close to the hole, but also pay attention to the doll not to be pressed by other dolls, and there is also the height of the baffle to let the vertical, such as the height of the irritation-sensitive fruit baffle is too high is an obstacle, you can use a height difference to let the doll fall into the hole, but there is a high probability that the merchant will set the voltage of the claw, so that the grip is not so strong.
3. Pay attention to the placement of dolls, the success rate of standing and lying dolls is different. Generally speaking, it is unlikely that a standing doll will be caught in a hole for just one coin, unless the doll happens to be next to the hole. Most of the time, it costs a coin to grab the head and put it down on its side so that the claws can be fully grasped.
-
Anonymous users2024-02-05Let's start with the introduction of the crane machine:
Pure** clips and doll types come to the study of where to start.
1。The first thing is to see if the claws have grip, if the claws are very loose, you can directly change the machine, because there is no possibility of grabbing. Where I went before, there were 15 machines, and only 4-5 machines had claws, and 2 of them were relatively tight and easy to grasp, so I basically stared at them!
2。Here you may have to ask, how to see if the claws are tight, here are a few experiences, (1) the easiest is to pay the tuition, is to try to catch it first. (2) When you are playing with the orange and observe someone scratching next to you, it happens that you have not touched the machine, so you better pay attention to its claws.
3) This point is not very useful, because it is more violent, haha, that is, you pat the claw machine, if the claw is loose, it will be easy to shake, you can use this point to see if the claw is likely to be caught.
-
Anonymous users2024-02-04The tips for catching dolls are as follows:
1. Push down the doll.
It is a very practical technique to push the doll, such as a larger doll, or a two-headed doll like a bear and a piggy, it is best to grind the hand from the doll's body and neck, if you clamp from the head of the doll sitting on the skin, the clip has no grip point, and the doll is easy to fall off. The method is very simple, that is, the clip falls a little bit, so that one paw is on the doll's head, and the other two paws grasp the doll's body obliquely, and the doll will be pulled down after the clip is withdrawn.
2. Throw the clip.
First of all, the target doll should not be too close to the glass or the acrylic of the outlet, otherwise the bucket will be knocked by the clip. After confirming that there are no obstacles next to the target doll, throw the clip left and right, let the clip swing sharply from side to side, find a good time to press the drop button, and when the claw clamps the doll to retract, it will throw the doll to the exit.
3. Roll into the hole.
This method is simple, but it is important to observe first. Generally speaking, it is easier to roll in a slope of more than 45 degrees, and it is more difficult to roll in a slope of less than 30 degrees. The method is that when the clip falls, don't be in a vertical line with the doll, and the clip should be slightly closer to the hole, so that when the clip ** comes up, there will be a pull to the exit.
This method is suitable for machines with low opening heights. It's better to be the kind of machine with a lot of dolls. <>
1. Don't rush it. It is estimated that most of the little girls have a soft spot for the cute little dolls, as soon as they see the little dolls, they can't walk, especially when they see the mountains of dolls in the doll machine, and only spend 1 yuan to get a doll opportunity, it's really good, when there is such an idea, you must be calm, you have to analyze, the doll machine as a profitable entertainment machine, the demand is greater than the pay, that is, put 50 dolls in the machine if you can't earn more than 5 times the profit, it doesn't do, so, In the face of the crane machine, you must be calm, you must invest money to catch the crane machine if you don't see it, that will only make your money drift 2, pay attention to observation, what to observe? 2 aspects, observe the condition of the machine and equipment, don't be impulsive to catch, see how others catch, when others catch the situation of the mechanical claw shaking, if the mechanical claw shaking is intense, it is recommended not to be nostalgic for this machine, because the grip of the claw is insufficient, and the back and forth shaking undoubtedly increases the difficulty of catching the little doll, the most important thing is that if the shaking is violent, when you are ready to claw, it does not stop, it will seriously affect the accuracy of catching the doll, and it is very likely to hit the situation of which point; Another one to observe the placement of the doll, pay attention, not the doll you like will definitely be able to catch out, because the grip of the mechanical claw is insufficient, therefore, as long as the little doll is pressed or squeezed, it will cause you to be unable to catch it, so, before grabbing, be sure to see if the target is pressed and squeezed 3, grab the doll to choose the middle area or near the exit, sometimes you will find that the doll around the glass wall of the doll machine is more beautiful than the middle zone, don't be fooled at this time, Don't grab the dolls around, because the top of the mechanical claw is its mechanical and circuit part, when the mechanical claw runs around, you will find that because of the space problem, the mechanical claw is not close to the glass wall, 4, don't go over the mountains and mountains, sometimes you will find that there will be a doll that can be caught in the middle of the area, don't scratch, because even if you successfully grab it, when you come back, it will be because of the height of the problem that the doll that has been caught will eventually fall due to the doll below the doll. The problem of the size of the doll, the big doll can not be caught, the heavier it is, whether it can be caught is one thing, even if it is caught, it is also dragged away, on the small power of the mechanical claw, you still don't grasp the big one, visually, find some mechanical claw one claw can be the doll as a whole or 2 3 parts of the doll to catch, the probability of success will be very high 6, the problem of the size of the mechanical claw, play more, find different doll machines, the size of the mechanical claw is different, needless to say, just observe carefully, choose the big claw machine to play, it's okay 7, skillful, sometimes the doll will be near the exit, in fact, it's very easy at this time, even if you pay a little more, it doesn't matter, because such a doll can roll off with a few pulls with mechanical claws.
The first thing is to see if the claws have grip, if the claws are very loose, you can directly change the machine, because there is no possibility of grabbing. >>>More
Shake the lever from side to side so that the hook also rocks from side to side, and press the button at the right time. The hook will still sway from side to side as it goes down, but our ultimate goal is to see the base of the claw as shown in Figure 3"Blue dots", but the paw grabbed the doll. What is said here"The right timing"It is the most technical in the whole process, but it is not difficult for people who often play games or react quickly, and ordinary people don't worry, the big deal is to spend three dollars to practice to find experience, and remember which angle is the best.
Where to catch loaches:
Loaches are often found on the surface of silt rich in plant debris at the bottom of lakes, ponds, ditches and paddy fields. >>>More
1. First of all, prepare 700 grams of high-gluten flour and 6 grams of edible salt (the effect of salt can improve the gluten of flour, which can make the dough more malleable, and it will be thinner later), 370 ml of warm water (warm water and noodles, the cake will taste softer when you eat it). After mixing into a flocculent dough, knead it into a smooth porcelain dough. >>>More