Eager to catch the doll cheats, what are the cheats for catching the doll?

The first thing is to see if the claws have grip, if the claws are very loose, you can directly change the machine, because there is no possibility of grabbing.

Regarding the selection of the position of the doll, the easiest position to catch: for example, the hole is square. Just grasp the line in the hole.

So that the doll doesn't have to turn around when it is caught. Go straight into the hole. The success rate is relatively high, and the crane machine has a rocker and a button! After adjusting the target with the joystick, do you just press the button, and then ordinary people just wait for the paw to fall on the target, and then watch it slowly catch it.

It's the wrong way to catch it! The trick is that the moment the claw lands on the target, (i.e., the moment the target is in the claw but hasn't caught it) quickly press the button again, and the claw will suddenly grip it, then you are half the battle, and the other half depends on luck and the condition of the machine

The cheats for catching dolls are:

Grasp the doll and pay attention to the direction of the paws. At first, the paw must move in a straight line, and if the paw turns on the way to grab the toy, it will throw the doll off, so remember to make sure the paw goes in a straight line. After the lower claws, pay attention to the angle at which the claws fall.

Because the shape of the doll in the machine will be different, it is necessary to look at the actual situation to see where you want to try to make the clip fall on the doll and successfully clip it out.

Precautions: (1) Be careful not to knock on the glass of the crane machine when throwing the clip, so if the target is too close to the edge, you can move the clip to the machine first, and then rotate it.

2) Pay attention to the remaining time, don't be too obsessed with throwing the clip, so as not to make the clip stop in time, causing the hook to shake and deviate from the target.

3) This technique is applicable to crane machines with rockers, and only two-button forward machines cannot be used.

1. Observe the height of the baffle first.

The baffle of some crane machines has been tampered with by the staff, and if you see that the position of the baffle is too high, choose another one.

2. Observe the paws.

Try the crane machine to see if the claws are loose, if the claws are loose, the doll will fall if it is caught, then the claw machine can also be abandoned.

3. First watch Bechang cover the people on the side.

If someone else catches it several times and doesn't catch it, just wait for others to go to this crane machine to catch it, because there is a probability of catching a doll, and others haven't caught it several times, and they may catch the doll a few more times.

4. Pay attention to the placement of the doll.

Look for dolls close to the exit, generally dolls close to the exit are easier to catch.

Note: The minimum height of the doll is flush with the height of the hole baffle;

The size of the doll should match the size of the claws;

The doll should have a relatively large support surface, and the two claws should have two sides that can be grasped by slag resistance;

The grabbed doll can't be too soft.

It takes skill to catch a doll, and some people can't catch the doll no matter how many times they catch it, so let's talk about the cheats of catching the doll! Destroying the Sparrow.

01 Observe the height of the baffle first, some of the baffles of the crane machine have been manipulated by the staff, if you see that the position of the baffle is too high, choose another one.

02 After trying the crane machine, observe whether the claws are loose, if the claws are loose, the doll will fall if it is caught, then the crane machine can also be abandoned.

03 Watch others catch it on the side first, if others catch it several times and don't catch it, just wait for others to go to this crane machine to catch it, because there is a probability of catching a doll, others haven't caught it several times, maybe you catch it a few more times and catch the doll.

04 Pay attention to the placement of the doll and look for the doll near the exit, which is generally easier to grasp near the exit.

The hidden secret of catching a doll is: push the doll down and shake the clip.

1. Push down the doll: It is a very practical technique to push the doll, such as a larger doll, or a two-headed doll like a bear and a piglet, it is best to grasp it from the body and neck of the doll. If you really like this doll, I suggest spending two coins to pave the way first, and then catch the crack doll recklessly.

2. Throwing clips: This method is more difficult, and my hands are more stupid, and I am always unsuccessful. First of all, the target doll should not be too close to the glass, otherwise it will be knocked by the clip.

After confirming that there is no obstacle next to the target doll, throw the clip left and right, let the clip swing from side to side sharply, find a good time to press the drop button, and wait for the claw to clamp the doll to retract, and throw the doll to the exit with skin.

Precautions for catching dolls

When clamping the doll, pay attention to calculate the position of the clip, after clamping the doll, the clip will not relax at this time, and swing while retracting, and the clip will generally let go after reaching the top, but our doll will also be thrown to the hole. This method sounds like a good idea, and it's much safer than moving the clip slowly, but it's hard to aim, so the success rate is not high, and the RP is important.

The size of the doll should match the size of the claws; This one is also quite important, the claws can not be too big or too small relative to the doll, the big claws grab the small doll, the doll will leak out from the claw gap, the small claw grabs the big doll, that is called calcium deficiency claw weakness. Don't scratch the doll that is too soft, because the claw on the supporting surface will sink directly, and the elasticity will be much worse.

1. Before catching the doll, you should observe it first.

2. Observe the shape and strength of the claws of the crane machine.

3. Observe the aiming of the claws on the front side of the machine.

4. Before the doll shouts fiber, it is necessary to observe the swing law of the clip.

5. Observe whether there are dolls near the mouth of the cave and clip the dolls close to the hole.

6. The clip should not go straight up and down, it is best to clamp the doll obliquely, so that the clamp is firmer and the natural success rate is higher.

7. Don't choose the machine that someone else has just clipped.

8. When the height of the doll is clamped with the doll, it is best to choose one that is higher than the orange imitation plate.

9. The position of the clip doll The claws of the clip doll move and rotate are fixed, and the descent is to grasp the position of the doll with edges and corners.

Doll catching games has become a popular form of modern entertainment. The goal of this game is to grab the doll toy with a robotic arm and bring it back to the player. While it sounds simple, it actually takes some tricks and tricks to successfully catch the doll.

The first tip is to choose the right machine. Different machines may have different gripping forces and the length of the robot arm. A long-arm machine may be easier to reach the doll, but a shorter machine may be easier to control.

Additionally, some machines may increase the gripping force for a specific period of time, which may make gripping easier.

The second tip is to choose the right target. Some dolls may be easier to grab than others. In general, smaller dolls may be easier to control because they are lighter. Additionally, some dolls may be placed closer to the robotic arm, which makes it easier to grab them.

The third tip is to choose the right location. Hole Ash: Usually, the doll-grabbing machine is placed on a relatively flat surface, which makes it easier for the player to control the robot arm. Additionally, some machines may be placed closer to walls or other obstacles, which can make gripping more challenging.

Finally, there are a few tricks and tricks that are required to successfully grab the doll. The player needs to learn to control the speed and direction of the robotic arm in order to be able to grasp the doll properly. In addition, players will also need to pay attention to the position and angle of the robot arms to ensure that they are in the correct position to grab.

In conclusion, the doll catching game may seem simple, but it actually requires some tricks and tricks to successfully catch the doll. Choosing the right machine, target and location as well as learning the right tricks and tricks are the keys to successfully catching the doll.