What are the models of excavators and what is the corresponding power

Your Lord can't do it. There are too many models and brands on the market, and there are more than 10 models in one brand, and there are more than 10 kinds of power.

You can tell you the bucket load.

Machine side. 2t machine square. Machine side, machine side.

Machine side. Machine side, machine side. 120 135 150 165 200 220 230 250 300 300.

It doesn't matter further up, I'll give you a reference to the 420 machine side.

Machine side. 2t machine square. Machine side, machine side.

Machine side. Machine side, machine side. 120 135 150 165 200 220 230 250 300 300.

Excavator models are roughly divided into etc.

After removing the number of 0, it is close to its tonnage, and the classification of large, medium and small excavators is divided by tonnage. Generally, those below 20 tons belong to small excavators, between 20 tons and 30 tons belong to medium-sized excavators, and those above 30 tons belong to the category of large excavators. However, due to the regionality, many places are different.

Generally, the model number is written on the side of the cab. 200 is a 20-ton excavator, 220 is a 22-ton excavator, and 320 is a 32-ton excavator. The excavator is generally modeled by its own weight, and the bucket is generally 1 ton, and there are also tons and tons.

Precautions for safe driving of excavators:

1) Proper use of handrails, tracks and footrests. The excavator cab will be equipped with handrails outside the cab, and the large and medium-sized excavators are also equipped with pedals, so when getting on and off the car, you must make good use of the handrails, tracks and pedals, and do not jump directly from the machinery.

2) Strictly abide by the cab driving regulations. The cab is limited to one person, and no other person is allowed to ride with the driver, who sits on the seat and fastens his seat belt.

before you can operate.

3) During the excavation process, pay attention to maintaining the stability of the machine. Do not dig near the track to prevent the earthwork from collapsing and the machine from tilting, and if such an accident occurs, use the bucket to prop up the body and adjust the track and shoulder.

Hold the right angle and slowly back away from the danger.

The commonly used specifications of excavators are 150 type, 200 type, 220 type, 300 type, 360 type, 450 type, 485 type, and 500 type.

The model is 35 is tonnage, the bucket capacity is about cubic, the model is 60 is 6 tons, the bucket capacity is about cubic, the model is 120 is 12 tons, the bucket capacity is about cubic, the model is 160 is 16 tons, and the bucket capacity is about cubic.

Excavator classification:

1. There are two common excavators according to the driving mode: internal combustion engine-driven excavator and electric excavator. Among them, electric excavators are mainly used in plateau anoxic and underground mines and some other flammable and explosive places.

2. According to the different walking modes, excavators can be divided into crawler excavators and wheeled excavators.

3. According to the different transmission modes, excavators can be divided into hydraulic excavators and mechanical excavators. Mechanical excavators are mainly used in some large mines.

4. According to the use, excavators can be divided into different categories such as general excavators, mining excavators, marine excavators, and special excavators.

There are several excavator models, such as Kobelco 130 excavator, Kobelco 775 excavator, Kobelco 260 excavator, and Shengang 350 excavator. Excavator brands include, Caterpillar, Komatsu, Volvo, Hitachi, Kobelco Sany and so on. There are small 60 models and medium 323 models.

The excavator is a multi-purpose earthwork construction machinery, which mainly carries out earthwork excavation and loading, and can also carry out land leveling, slope repair, hoisting, crushing, demolition, ditching and other operations.

The role of the excavatorIt has been widely used in highway and railway construction, bridge construction, urban construction, airport and port and water conservancy construction. Therefore, excavators have the functions of bulldozers, loaders, cranes, etc., and can replace most of the work of these machinery. By configuring the bucket corresponding to the width of the trench, the tracks on both sides are parallel to the edge line to be dug for efficient trenching operations.

When digging a wide trench, dig the sides first, and finally dig out the middle part.

Model & Bucket Capacity:

1. The model is 35, and it is stuffy, and the tonnage bucket capacity is about cubic meters.

2. The model is 60, that is, the bucket capacity of 6 tons is about cubic meters.

3. The model is 120, that is, the bucket capacity of 12 tons is about cubic meters.

4. The model is 160, that is, the bucket capacity of 16 tons is about cubic meters.

PC200-8, PC is the generation that represents the Komatsu excavator series, 200 is the representative of the 20-ton class, and -8 represents the generation of innovation.

Carter 306, 3 is on behalf of Carter excavator series 06 is on behalf of 6 tons, and the new algebra is represented by ABCD.

Excavator models are available. The meaning of the various types of excavators is different, but most of them should show the tonnage of the machine, for example, 200220240 should represent 20 tons, 22 tons, 24 tons, and then there are representative serial numbers, or several generations of products.

Take Carter 320B as an example, 3 means 3 series of engines, 20 is 20 tons, as for B is that generation of products, and then there are 320C320D, etc., probably this is what it means.

The difference between excavators

The model of the common excavator brand is generally composed of three parts: excavator ** (number or letter) + tonnage ** (number) + series ** (number), or plus some special English ** four parts such as L and LC.

The first part of the model of the excavator is the excavator**, the ** of each family is naturally different, which can be roughly divided into two kinds, one is the beginning of the English letter on behalf of the excavator**, and the absolute majority of brands are like this. For example, Komatsu's "pc" means excavator, Hitachi's excavator** is "ZX", Doosan's excavator** is "DH", and Kobelco's excavator** is "SK".

Another excavator ** is represented by numbers, of course, it is the famous Caterpillar, Caterpillar's excavator is represented by the number 3, such as the more familiar Carter D, 313D2 and so on. Carter's other product models also start with numbers, such as: "1" for motor graders, "7" for articulated trucks, "8" for bulldozers, and "9" for loaders.