How do you wipe such shoes? How to wipe your shoes clean

Soak shoes: Throw the shoes into the basin, fill the basin with 2 3 pieces of water, and the washing temperature should not be higher than 45 degrees Celsius, so that the shoes are soaked with water, and some washing powder can be added to the general mesh shoes. Note:

Don't let your shoes soak in water, you can't throw them in a basin and soak dirty clothes, just don't care, and wash them after half a day, so that your shoes are easy to open after drying. Wash the soles: This is very easy, use a shoe brush to brush on the soap first and then brush the soles, what small stones in the glue seam of the sole can be picked clean with a toothpick.

Wash the upper and inside the shoes: use a waste toothbrush, but don't want the kind where the old hair is rolled, in fact, you can also buy a new toothbrush with soft hair for more than 3 yuan to make a special shoe washing brush, and you can also use a shoe brush, but I think if it is a professional track and field shoes is fine, but if it is the usual running shoes, it will hurt the mesh too much. Brush a little soap with a toothbrush, and then brush the mesh, and the inside can be brushed as well.

Be sure to remove the shoelaces before washing the shoes, rub the shoelaces with soap, and brush the tongue with a toothbrush. Wash the shoes 1 or 2 times repeatedly, pour out the dirty water and replace it with clean water, soak the shoes in water, and use a toothbrush to clean the shoes without brushing soap. The part of the skin surface can only be brushed with water, and no detergent can be added, otherwise the skin will be yellow and cracked, and avoid contact with organic reagents and oil solutions.

Throwing water: Instead of putting it in the washing machine, you can use your thumb to squeeze out some water in the area where there is a lot of sponge in the front and back heels of your shoes.

Then grab the middle of the sole, the heel direction should be in the front direction, the toe of the shoe is behind you, and start to pick up your arm and swipe back and forth a few times, the more times you throw the better for the shoe.

Drying: You can use shoelaces to wear a few holes casually, then tie them to a triangular clothes rack, and hang a shoe on one side to dry in a ventilated place that won't be exposed to the sun like drying clothes.

Brush your shoes or toothbrush preliminarily, and then blow it with a hair dryer

The leather area can be wiped with black leather shoe polish, and the mesh cloth can be brushed with a soft brush with dish soap.

1. Brush off the dust with the side of the shoe with more bristles.

2. Use a small watering can to spray moisture on the leather upper.

3. Dip the less hairy surface of the shoe brush into some shoe polish, and apply the shoe polish evenly in a circle in a damp place, and apply it evenly in one direction. Start with the toe of your shoe and work your way back little by little. The more times you rub the toe of your shoe, the better. Wipe one and then the other.

4. After the two leather shoes are polished, wipe the hairy side with a shoe brush and wipe it again, straight back and forth. The more times, the better.

5. Wipe it with a soft cotton cloth again. The cotton cloth is wrapped around the right hand, and the four fingers are close together when wrapping, and the four fingers are supported outward after wrapping, the purpose is to make the cotton straight and strong. Hold this position to polish your shoes brighter.

There are two reasons why shoes turn yellow: one is that they are oxidized by exposure to the sun after washing, and the other is that they are prone to yellow spots after tidal or sweating.

Methods of whitewashing:

1. The reason for yellowing is that the laundry detergent (or soap) hangs in the shoes and is not completely rinsed out. In addition, white canvas shoes should not be dried in the sun, but should be dried in the shade and in a well-ventilated place.

2. Brush shoes will generally turn yellow because of the deposition of stable substances, such as some stains, sweat, etc., first of all, try to use neutral detergent when brushing shoes (toothpaste is a good choice), you can take white paper (preferably white toilet paper) to wrap the shoes when you wash them, and when the shoes are dry, you will find that the shoes have no yellow marks, and there are a lot of yellow marks on the toilet paper, if the shoes have turned yellow, you can buy lead powder in the store to brush, wash the shoes, brush them when the shoes are wet, and then wrap them in paper to dry, Make sure your shoes are as white as new.

3. Don't brush it with laundry detergent, it's best to use detergent for washing dishes and then rinse it with water, then wrap it in toilet paper, put it in a ventilated place, not in a place where the sun is enough.

4. Wash the shoes with soap or laundry detergent, soak the washed shoes in beer for three minutes, then take the shoes to the balcony, put them in a cool place, and cover them with toilet paper on the upper of the shoes to dry, the effect is obvious.

The right way to take care of it: Recently, more and more people are using "Shine and Shine" - a simple and convenient shoe polish. However, it is necessary to wipe carefully and without sloppiness in order to prolong the life of the shoes. The correct order is as follows:

Brush the entire shoe with a large shoe brush to see if the protrusions on the brim are stained?

For uneven parts such as shoe edges or seams, use a small shoe brush to brush off dirt and fine dust.

Loosen the laces and use a small shoe brush to remove dirt that is not visible from the outside.

Squeeze a little cleaning oil onto the cloth and coat the entire shoe, at this time, the most important thing is to thoroughly apply the old shoe polish that remains on the shoe.

Take another cloth (not to be mixed with a cloth that uses cleaning oil), soak it in a little shoe polish and coat the entire shoe. Shoe polish is about the size of your little finger.

Once the entire shoe is coated, polish the entire shoe with a clean, soft cloth. The details must not be sloppy.

Finally, spray with a waterproof mist. The waterproof mist not only protects the shoes from water, but also makes them less susceptible to dirt.

After the waterproof mist has dried, place the last into the shoe.

Maintenance method after wetting: After the shoes are wet by rain, take appropriate disposal immediately to prevent the shoes from deforming.

First, use a fabric with good water absorption to absorb the moisture from the surface of the shoe. If you wipe it too hard, the dirt attached to it will scratch the skin of the shoes, so you should pay special attention.

Put newspaper or toilet paper inside the shoes and replace them to absorb the moisture completely.

When it is dry, it should be put in the last to prevent deformation. Then place it in a ventilated place to dry.

After it is completely dry, it is maintained according to the general maintenance method.

Buy a bottle of shoe polish (black, white, buy by the color of the shoes), a brush.

When wiping black leather shoes, you should first use a cloth to wipe off the dust on the leather shoes, then squeeze on the shoe polish, and drop 1 2 drops of vinegar on the shoe polish, evenly wipe the entire upper and heel foreskin with a brush, and then use a dry brush to brighten the shoes for 1 hour. In this way, the shoes are evenly shiny and can be kept for a long time.

How to wipe light-colored leather shoes When wiping light-colored leather shoes, you can first apply lemon juice to the upper of the shoes, and then polish the shoes or brush them with toothpaste, which will make the leather shoes shiny as new.

When polishing leather shoes, add a few drops of edible vinegar or water to the squeezed shoe polish, which can make the leather shoes shiny and not easy to get dust.

1. Leather. Wipe off the moisture and dirt from your shoes with a dry towel and then wipe them off with shoe paste or polish of the same color as your shoes. In addition, banana peels can remove oil stains from shoes, and dusting shoes with leftover or expired milk can prevent the leather from drying out.

2. Artificial leather. Shoes with artificial leather surface are relatively simple to clean, as long as you use a damp cloth to clean the leather surface and immediately wipe the water with a dry cloth, do not wipe the upper with the maintenance oil of the shoe polish shoes for a long time, which will cause small cracks in the upper leather.

3. Patent leather or PU leather. Shoes in patent leather and PU leather can be gently wiped with a soft, dry cloth to avoid scratches. PU leather shoes can also be solved with wind oil essence, drop one or two drops of wind oil essence on the stain, and then wipe it with a paper towel.

1. Baking soda cleaning method:

Preparation tools: baking soda, soap, toilet paper.

1) Prepare a basin of water, pour an appropriate amount of baking soda into the water, and stir well (baking soda has a strong stain removal ability and can effectively help remove yellowing marks from shoes.) ）；

2) Put the soiled white shoes in the water and let them rest in the water for a while;

3) Apply soap to the upper surface and clean it;

4) Wrap the small white shoes in toilet paper and place them in a ventilated place to dry naturally.

2. Sponge wiping method:

If there are stains on the shoes, soak the sponge, wring out the water, dip a little special detergent, gently wipe the stained area, and it is best to deal with the stain in time. Once cleaned, place it in a ventilated place and let it air dry.

3. Vinegar treatment method:

Drop 2 or 3 drops of white vinegar on the surface of the leather shoes, gently wipe them around the shoes with a brush, and then put them in a cool place to dry, so that the polished shoes will be brightly colored and bright for a long time.

4. Toothpaste wiping method:

1) Use a damp cloth to wipe the dust off the surface of the shoes.

2) For the dirt that can't be wiped off on the surface of leather shoes, you can find an eraser to gently wipe it clean.

3) If the eraser can't wipe off the place cocoa, squeeze a little toothpaste there, and then gently wipe it with a cloth.

4) After the surface of the white leather shoes is cleaned, apply shoe polish on the surface of the leather shoes, rub the shoe polish around the leather shoes with wax paper, and finally put them in a cool and ventilated place.