-
It takes about 3 to 10 minutes to receive the program authorization, and the card activation authorization method is as follows:
1. Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings";
2. Enter the password "9999";
3. Select "Installation and Signal Detection" in the "System Settings" interface (selected by default), and press the "Confirm" button of the remote control twice. Stand behind the satellite dish and let the front of the satellite dish slowly rotate from due south to the direction of the satellite (it is recommended to turn slower than the speed of the second hand of the watch). In the process of rotation, you should always keep an eye on the change of "signal strength" and "signal quality" in the debugging interface of the satellite receiver on the TV, and stop when the signal turns green, indicating that the satellite has been preliminarily identified and the satellite signal has been locked;
4. Network connection settings. IP settings: , port settings: 4567 or 04567;
5. The area code is set to the first six digits of the local ID number;
6. Turn off the power of the set-top box, insert the mobile ** card and smart card, and then turn it on;
7. Select "Base Station Information" in the system settings and press Confirm;
9. Wait for the base station information to pop up, and the scanned base station information appears on the TV, click the orange button "Store Confirmation";
11. Later, the information box will automatically pop up to prompt "Sent successfully", after exiting the menu, the upper right corner of the screen will prompt "During installation, please wait...."After 2-3 minutes, the screen will automatically pop up "Installation successful", if this message pops up, please wait patiently for about 10 minutes;
-
There is no authorization yet, and it will take a while.
-
Isn't it possible to see it after a long time of installation? Anyway, my hometown is fine, and I can see it.
-
Reason 1、In fact, the set-top boxCA card encryption authorization will be updated regularly,It will be updated once every month or two months,We don't turn on for a long time or the boot time is too short,It will cause the authorization of the set-top box to be lost,Because the set-top box is not powered on,So the opportunity to upgrade is missed,It causes everyone to open the TV and find that the yellow dialog box is displayed"E04Channel is not authorized"Prompt,Affect everyone's normal viewing。 2. There is also a situation that everyone's machine has failed, resulting in inability, so it is returned to the factory for maintenance, but the manufacturer's personnel forget that the set-top box is in a power-on state when replacing the equipment in the system, and the result will cause the information in the encryption card to not be completely cleared. Precautionary measure 1, everyone's household communication equipment should be powered on once a week, and the power on time should not be less than 4 hours each time, so that when the satellite encrypts the CA card, it will avoid missing the opportunity to upgrade, so as to avoid the problem of "E04 channel is not authorized".
2. When replacing equipment in the user management system, it is necessary to keep the set-top box on normally to ensure that it can receive instructions normally, but how do you know that the set-top box has received instructions? Here is a trick to teach you,If the encryption card of the set-top box receives the instruction to replace the device,The TV will appearE06Fault code prompt,At this time, it means that the receipt is successful。 Solution 1, please keep the set-top box turned on normally, and continue to turn on do not power off, most of the disturbance of the number of users will be automatically lifted within 3 hours, everyone wait patiently, do not press the remote control or other operations, but remember to slow down the black antenna behind the set-top box to erect it to avoid weakening the receiving capacity.
2. Another way is to send a text message, and everyone sends a text message (04 encrypted card number). The system doesn't let me send a number,The first inspection said that I was marketing) to the same time you need to keep the set-top box on normally,Then everyone patiently wait for the TV to return to normal,Under normal circumstances30Authorization will be issued within minutes,It won't make you wait too long,But you must remember to insert the encryption card back into the set-top box in time。
-
Clear the speed card, open the back cover of the receiver, there is a chip on the motherboard, the chip is 24g128, that is empty.
Everyone"Satellite direct television (DTH) service is to implement the spirit of the leadership's instructions, as soon as possible to solve the problem that the masses in rural areas are unable to listen to and watch radio and television for a long time, approved by the Central Propaganda Department, organized and implemented by the State Administration of Press, Publication, Radio, Film and Television of the new live satellite radio and television service, genuine Huhutong will appear on the TV screen turned on the three words, piracy no.
Everyone"Satellite direct television (DTH) service is a new live satellite radio and television service organized and implemented by the State Administration of Press, Publication, Radio, Film and Television in order to implement the spirit of the leadership's instructions and solve the problem of the masses in rural areas being unable to listen to and watch radio and television for a long time as soon as possible.
Live Satellite"Everyone"It is to fundamentally solve the problem of listening to radio and watching television in every household in China's rural areas at the lowest cost, the fastest speed, and the most effective way, which is conducive to narrowing the gap between urban and rural areas, accelerating the equalization of urban and rural radio and television public services, and allowing the rural masses to share the fruits of China's reform and opening up.
-
This is a radio and television satellite system that is not authorized. There are the following types of non-authorization instructions,1The installation area is not legal, 2If you open an account in another province, 3The brand's set-top box has been restricted by radio and television due to violations. Contact the seller now! No, you can only return it.
-
Answer: This is the radio and television satellite system is not authorized. There are the following types of non-authorization instructions,1The installation area is not legal, 2If you open an account in another province, 3The brand's set-top box has been restricted by radio and television due to violations. Contact the seller now! No, you can only return it.
Solution: 1. If the communication failure of reading information occurs due to poor contact between the smart card and the card slot of the set-top box, you can turn off the set-top box, pull out the smart card, wipe the metal contacts of the smart card with an eraser, and then insert it back into the card slot of the set-top box, and reboot it to return to normal.
2. If the insertion direction of the smart card is wrong and the communication fails, take out the smart card according to the above method and insert it correctly again, and the general metal contact should be downward.
3. Communication failure caused by smart card failure or set-top box card slot or internal circuit failure; In this case, it is necessary to contact the after-sales service of the set-top box to replace the smart card or detect the set-top box, find out the fault point for repair, or replace the faulty parts to solve it.
-
Every household is installed and positioned in Jiangluliang, and moved to Congluoyu Town, Linxian County, and cannot be received normally, and there is a current Anjiang installation program, and it is impossible to receive program authorization for a long time.
-
Summary. Solution 1: First, exclude whether the mobile phone card used has traffic and fees, and whether GPRS is enabled. Try a mobile SIM card and a Unicom SIM card respectively.
2. Connect the signal cable, insert the mobile phone card with traffic (mobile or Unicom), connect the ** cable, unplug the smart card, and power on the set-top box. 3. Press the "Menu" key to the system settings and press the password 9999 to enter, select the cursor "Network Connection Settings", press the confirm key, the cursor selects the network IP setting, you don't need to go to the IP, press the confirm key to save. To sum up, the receiving system of Huhutong restricts the viewing area, and can only be watched in the area at the time of installation, technically speaking, the set-top box is a station connected to the mobile communication network set up at the time of purchase, and if the station found is not the station set up at that time, it will stop working after ten minutes.
Huhu Tong has been successfully uploaded! Receiving program authorization, please wait. What's going on?
Hello, glad for your question. According to your description, it is explained that the loss of the early smart card did not receive the authorization of the Dora Xin in the service, and there are three reasons for this phenomenon
One is cross-county installation, the second is that the machine card does not match, and the third is that the SIM card inserted in the back of the machine is not in good contact.
The third reason is that you can use a mobile phone to dial the mobile phone card number inserted in the back of the mobile phone machine, if you can hear the call when dialing, it proves that the mobile phone SIM card inserted behind the machine is in normal contact, if you hear the mobile phone number you call the car code can not get through, then it means that the mobile phone card is missing brother card and the phone phone card is not in good contact with the machine!
Solution 1: First, exclude whether the mobile phone card used has traffic and fees, and whether GPRS is enabled. Try one of the upgraded mobile SIM card and Unicom SIM card respectively. 2. Connect the signal cable, insert the mobile phone card with traffic (mobile or Unicom), connect the ** cable, unplug the smart card, and power on the set-top box.
3. Press the "Menu" key to the system settings and press the password 9999 to enter, select the cursor "Network Connection Settings", press the confirm key, the cursor selects the Xiaohe network IP settings, you don't need to go to the IP, press the confirm key to save. To sum up, the receiving system of the household pass, limit the viewing area, can only be watched in the first socks area at the time of installation, technically speaking, the set-top box is connected to the mobile communication network set up at the time of purchase, if the station found is not the station set up at that time, it will stop working after ten minutes.
-
Summary. Hello, your message has been received, please wait patiently for 3 minutes.
Huhu Tong has been successfully uploaded! Receiving program authorization, please wait. What's going on?
Hello, your message has been received, please wait patiently for 3 minutes.
Hello, glad for your question. According to your description, it means that the smart card has not received the authorization of the Huhutong Service Center, and there are three reasons for this phenomenon: one is cross-county installation, the second is the mismatch of the machine card, and the third is the poor contact of the mobile phone SIM card inserted behind the machine.
The first two reasons to the installer in the background of the Huhu Tong system to see the machine installation record, the third reason can be used to dial a mobile phone plugged in the back of the Huhu Tong machine mobile phone card number, if you can hear the bridge this call through the witness to eliminate the Yuanming machine behind the insertion of the mobile phone SIM card normal contact, if you hear the first collapse of your mobile phone number can not get through, then it means that the mobile phone card and the Huhu machine contact is poor!
-
Summary. Huhutong is a satellite signal receiving facility launched by the State Administration of Press, Publication, Radio, Film and Television. Huhutong has built-in set-top boxes, antennas, high-frequency heads, encryption cards, feeder cables, etc., and has functions such as positioning, wireless two-way communication, and first-class services.
Hello, I am inquiring for you here, please wait a while, I will reply to you immediately Hello, I am happy to answer your question It takes 3 to 10 minutes to receive the program authorization.
Huhutong is a satellite signal receiving facility launched by the country's new Wenzhou Pei Publishing and Radio and Television Bureau. Huhutong has built-in set-top boxes, antennas, high-frequency heads, encryption cards, feeder cables, etc., and has functions such as positioning, wireless two-way communication, and first-class services.
I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up
-
Hello dear, the reasons and solutions for not receiving the program are as follows: 1. The plug of the signal cable connecting the set-top box is loose or has fallen off. Workaround:
Reconnect the signal cable to restore the signal. 2. The lid of the pot is aimed at the satellite, and the object is destroyed, the direction is shifted, or the high-frequency head is broken. Workaround:
It is necessary to adjust the orientation of the lid of the small pot accurately or replace the high-frequency head. 3. There is an obstacle in the direction of the satellite where the lid of the pot is aligned. Workaround:
Remove the remaining obstacles so that the direction of the lid is kept open, and there should be no cover to cover the object. 4. The signal demodulator of the set-top box is broken. Workaround:
Let the professional master replace the signal demodulator.
The relocation of HuHutong is mainly done in six steps: factory settings, entering the permission password, restoring the factory settings, punching in the local SIM card, restarting the set-top box, and searching for TV programs. >>>More
1. The specific steps of machine-to-machine upgrade are as follows: >>>More
The landlord bought a cottage pot, and he could adjust the pot himself. You can ** star finder wizard to calculate the local reception angle. Connect the wire, press the information key, the signal strength and signal quality bar appear, (the signal strength is about 50 70 after the line is connected) first adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle, in the ninth in our country is generally about 30 degrees from south to west, slowly turn the pot from south to west, the signal quality appears and adjust to the highest, and finally you can turn the high-frequency head a little, adjust the signal to the highest, see if all the stations are closed, fixed on it.