How to upgrade the set top box of Haisen dual mode household?

1. The specific steps of machine-to-machine upgrade are as follows:

1. Prepare a machine that has been upgraded with new software as the host;

2. And treat the machine to be upgraded as an auxiliary machine;

3. Press the menu button to enter the setting upgrade interface;

4. Press the password to 751688;

5. Press F1 again;

6. Press the arrow keys to confirm;

7. Then use a serial cable to connect the host and the machine (auxiliary machine) to be upgraded;

8. Turn on the power of the auxiliary machine and enter the upgrade;

9. Wait for 100% to turn off the power of the auxiliary unit;

10. Successful upgrade.

Second, the serial port upgrade.

1. A desktop computer, with a COM interface (serial port), a COM port connection cable (one male port and one female port), respectively connected to the COM port of the computer and the COM port of the set-top box, and set the parameters of the COM port, the baud rate is set to 115200, and the name of the serial port is noted;

2. Prepare the flashing software and hardware, use the ABS flasher tool, replace it according to the different motherboards, find the bin file suitable for the motherboard of your set-top box (according to the corresponding bin file of the chip, motherboard, model, etc.), and then connect the computer and the set-top box with COM wiring, open the computer, run the flashing software, select the parameters, and enter the upgrade;

3. Generally, the application software is selected, once the bin file does not match, it will fail to flash;

4. Then turn on the power supply of the set-top box, it will be automatically connected, boot1 runs, boot2 runs, you must pay attention to check the software configuration parameters again;

5. Point burning, the progress will be completed when it reaches 100%;

6. Turn off the power of the set-top box, unplug it and connect it to the TV, then connect the antenna, and then turn on the set-top box.

3. Air upgrades.

The over-the-air upgrade is relatively simple, as long as the set-top box is turned on, a software upgrade flow is detected, and the software version, hardware version, serial number and other conditions are compared, and the set-top box is directly restarted to enter the upgrade interface if the conditions are met.

The 818 is currently only available for machine-to-machine upgrades.

As long as the set-top box is turned on, a software upgrade flow is detected, and the software version, hardware version, serial number and other conditions are compared, and the set-top box can be restarted directly to enter the upgrade interface.

Turn it off and then turn it on, put back the original TV card of the receiver in the receiver you are locating, and wait.

Press F4 on the remote control, scan the base station, and go back!

waited for a long time until the TV show appeared on the screen. Then, observe if the problem is solved? At least **5 minutes, if the words "location information has changed, please contact the customer service center" will not appear in the upper right corner of the screen, it proves that the receiver can watch the program normally!

The use of the dual-mode set-top box is as follows: ("satellite + terrestrial" signal) 1. Press the "Menu" button on the remote control to enter the "Main Menu" interface and select "System Settings"; 2. Enter the password "9999"; 3. Select "Installation and Signal Detection" in the "System Settings" interface (selected by default), at this time, it will let you select "Satellite", "Ground", "Satellite + Ground", and press the "Confirm" button of the remote control to change the macro twice. Stand behind the satellite dish and let the front of the satellite dish slowly rotate from due south to the direction of the satellite (it is recommended to turn slower than the speed of the second hand of the watch).

In the process of rotation, you should always stare at the change of "signal strength" and "signal quality" in the debugging interface of the satellite receiver on the TV, and stop the action when the signal becomes green, indicating that the satellite has been preliminarily identified and the signal has been locked; 4. Network connection settings. IP Settings:, Port Settings:

4567 or 04567; 5. The area code is set to the first six digits of the local ID number; 6. Turn off the power of the set-top box, insert the mobile ** card and smart card, and then turn it on; 7. Select "Base Station Information" in the system settings and press Confirm; 8. Wait for the satellite machine to automatically search for mobile base station information, and automatically list the base station information according to the signal strength of the base station; 9. Wait for the base station information to pop up, and the scanned base station information appears on the TV, click the orange button "Store Confirmation"; 10. In the channel screen, the "smart card has not been opened, whether to install it, select Confirm to install, select Return **Free Programs" dialog box, press the "Confirm" button to open and install; 11. Later, the information box will automatically pop up to prompt "Sent successfully", after exiting the menu, the upper right corner of the screen will prompt "During installation, please wait...."After 2-3 minutes, the screen will automatically pop up "Installation successful", if this message pops up, please wait patiently for about 10 minutes; 12. Later, the automatic ** program, the authorization is completed, and the normal ** TV program can be.

For the problem of upgrading the user's account in the process of making the user's account pass, you can choose a mandatory upgrade or a non-mandatory upgrade according to the specific upgrade needs, and refer to the following steps to complete the upgrade.

Tools Raw materials: Household TV remote control.

1. When we turn on the TV and set-top box, the [new version available] upgrade prompt will pop up, at this time, use the corresponding remote control, select [Confirm] to complete**, you can upgrade immediately.

2. If there is no upgrade prompt interface, you can click the [Menu] button on the remote control to bring up the function options.

3. In the list on the left, find [Set up the mountain in the system] and click [Confirm] to enter.

4. Enter the four-digit password 9999 or 0000, [confirm].

5. Then, the system will automatically detect whether there are upgradeable files, follow the above steps 1 and 2 to start the upgrade, and will automatically restart after completion, and you can use it normally.

Dual-mode is NDS encryption and network positioning, and the machine requires a radio and television authorization card, and it can only be watched in remote mountainous areas outside towns.

Strap it on your head, insert two wires into your ears, and you're ready to go.

Huhutong is a kind of live satellite television, a new service of live satellite radio and television organized and implemented by the State Administration of Radio, Film and Television. Sometimes the software needs to be upgraded, and if you don't, there is no signal.

There are two set-top box upgrade modes: one is mandatory upgrade and the other is non-mandatory upgrade.

Mandatory upgrade: When the set-top box is powered on and receives the upgrade signal, the set-top box will automatically upgrade the work. You can see the progress of the upgrade on the TV screen.

Non-mandatory upgrade: When the set-top box is powered on and receives the upgrade instruction, the user will be asked whether to upgrade, and when the user selects "Confirm", the set-top box will perform the upgrade work.

It should be reminded that even if the user chooses not to upgrade immediately, the set-top box will automatically upgrade the set-top box the next time it is turned on. You can see the progress display on the TV screen.

Note: During the upgrade process, do not power off or restart the set-top box to avoid damage to the set-top box.

Press the menu first, then the system settings, and finally restore the factory settings.

(1) Clear the set-top box information.

1.Unplug the signal cable (this step is very heavy.)

to); 2.Boot;

3.Select the remote control or receiver panel.

the "Menu Key";

4.Go to "System Settings" and enter the password field.

Enter "9999" (some models can enter super password.)

code "0000"), execute "factory reset reset", confirm; (2) Machine-to-machine upgrade set-top box.

One mother machine. Actually, it is possible at the moment.

Look at the machine. One serial port line. One handset.

It is only not possible to upgrade at this time or to continuously display the upgrade status.

state of the machine. 5 Connect the serial cable behind the machine.

6 Power on the mother machine - press the F4 button three times.

7 OK. At this time, the panel of the parent computer is displayed.

The handset is powered on, and the panel is displayed as.

Is it messy. (or may not change).

9 The upgrade starts on the parent computer panel showing 001

It becomes to 099 in E-P and finally in become.

001 (may or may not be shown). Upgrade to.

Merit! 10.Done, exit.

11 Turn on the handset and run normally.

There are too many ** in this household, and the call is all day.

Why is there a signal but not a single station can be received?

It's better to buy a network set-top box that can watch a lot of units.

I just wanted to say! That's a money-making opportunity for radio and television! You have to go to him and level up! There is no way! Izzy you!

If you buy it in, you will upgrade it to a certain cost!!

Go to the official forum to find out, the official forum will have many solutions for Wang Pazhi, such as flashing the machine and **The latest upgrade package. It is recommended to install the sleepy sensitive sofa butler software,The sofa butler is the largest smart TV application market,There are a variety of cracked applications in it,Very good。