Steel radiators, steel radiator manufacturers

Of course, copper and aluminum are better!

Specifically, it is good that ** can be referred to in my space.

Copper and aluminum are good. Copper and aluminum are better than steel. Copper has good thermal conductivity and aluminum has good heat capacity. Combining the two makes for a great radiator.

The specific heat capacity of steel is larger, and the heat absorption is fast and the heat release is slow; The specific heat capacity of aluminum is small, and the heat absorption is slow and the heat release is fast; There are advantages and disadvantages; The copper is in between, and the heat dissipation performance is good, so most of the high-end radiators are made of copper; Because aluminum is convenient and cheap to work, it is mostly used for low-end radiator materials; But steel is still relatively rare, the performance is not very good, **more expensive....

It is certain that the copper and aluminum composite is good, and the heat dissipation of steel is slow. What a waste of resources! I also just bought a set of St. Lawrence that I recommend you to buy as well, their warranty is 10 years, and there is also a 10 million insurance amount. So many guarantees are used with peace of mind.

The copper and aluminum radiator is better, because the specific heat capacity of the steel is not as high as the aluminum, so relatively speaking, the copper and aluminum composite is better, and the copper and aluminum resurrection is better, I know that the new fly radiator, 20 only replace not repair, 50 years of warranty. You can go and see, now the new flying radiator, joined the Qijia ** network, enjoy the value of ***.

1. Hengshui Zelong Beidi Business ****Main products: sales of radiators, steel radiators, steel bathroom radiators, copper-aluminum composite radiators, steel-aluminum composite radiators, steel-aluminum composite radiators, steel heat exchangers.

2. Hebei Chunbo heating equipmentMain Products:Cast Iron Radiator; steel radiators; steel-aluminum-copper-aluminum composite radiator; industrial radiators; heating radiators; finned tube radiators; Brazed plate heat exchanger.

3. Hebei Ji Minghao HVAC equipmentMain Products: Steel Radiators, Copper Aluminum Composite Radiators, Steel and Aluminum Composite Radiators.

4. Hebei Xianghe cooling and heating equipmentMain Products:Copper-Aluminum Composite Radiator,Copper-Aluminum Convection Radiator,Steel Plate Radiator.

5. Jizhou Jishang heating equipment****Main Products: Radiators, Radiators, Replacement Radiators.

Steel plate radiator is a new type of high-efficiency and energy-saving radiator using high-quality cold-rolled low-carbon steel plate as raw material. This product is highly decorative, small in size to achieve the best heat dissipation effect, no need to add a heating cover, minimize the indoor space, improve the utilization rate of the room.

It adopts high-quality cold-rolled steel plate, advanced three-layer phosphating surface pretreatment, water-based cathode phosphorus coating pre-coating, substrate electrophoretic painting, epoxy resin electrostatic powder spraying process on the surface, and bakes it into a gorgeous and solid surface paint layer.

The steel plate radiator is a kind of heating radiator for single plate single convection, double plate single convection, double plate double convection, and three plate and three convection.

The varieties of steel plate radiators can be divided into two types: standard type and composite type according to the model, the so-called standard type is that the water inlet and return water are on the side of the radiator, which is the side-in and side-out type; The composite type means that the water inlet and return water are on the lower side of the radiator, and the composite type can be on the lower left side and the lower right side. According to its structure, it can be divided into 10 types, 11 types, 20 types, 21 types, 22 types, 33 types, 44 types, etc.

The height of conventional steel plate radiator is 200mm, 300mm, 400mm, 450mm, 500mm, 600mm, 700mm, 900mm, and the length varies from 400 to 3000mm.

The steel radiator has a rich shape, so the appearance is beautiful, the surface is smooth, and it integrates practicality and decoration.

The corrosion resistance of ordinary steel is relatively poor, and the best way to make steel radiators is T12 or T14 high-quality low-carbon steel, but many small enterprises use inferior steel, which is one of the reasons for the huge difference between different brands, but it is difficult for consumers to distinguish with the naked eye, so buy radiators and try to choose brand-name products.

In addition, when buying a steel radiator, you must understand whether the inner wall of the radiator has internal anti-corrosion, a good radiator should have double-layer internal anti-corrosion, and many radiators do not even have anti-corrosion, which is extremely unsafe.

At present, the anti-corrosion technology of the steel radiator is relatively mature, as long as it is a serious and responsible enterprise, the quality of internal anti-corrosion is very passable.

Therefore, the steel radiator can be used in both the central heating system and the self-heating system, but in the central heating system it is suitable to choose products with wide waterways, and the self-heating system is suitable for products with small waterways.

You can get it for free

Introduction: Steel radiator is a naïve low carbon steel plate as a raw material of efficient new energy-saving heat dissipation products, it has a strong decorative dislike, a smaller volume can also make it achieve a high heat dissipation effect, no need to add a heating hood, can minimize the room space occupied, is the highest utilization rate of the room.

Steel radiators can be roughly divided into four types: double-plate double convection, single-plate single convection, double-plate single convection and three-plate triple convection.

The model of the steel radiator can be divided into double plate and single plate, and the single plate and double plate can be divided into several small types, 10 type, 11 type, 20 type, 21 type, 22 type plate heat dissipation. It is connected to the left and right sides of the heating system and is often used in both forced and gravity circulation heating systems. The plate radiator 10VK, 11VK, 20VK, 21VK, and 22VK are often connected to the bottom of the left side of the heating system, which is also used for forced circulation and gravity circulation.

The specification scale of 300 2000mm is the scale of the commonly used rigid radiator, and choosing the right steel radiator can not only make the heat dissipation effect better, but also make the home decoration more beautiful.

The general model of the radiator is marked as X1, G, X2, X4-XAmong them, X1 represents the brand of the heat sink, G represents steel, and X2 represents the structure of this heat sink.

And our commonly used models are PGZB600*400, PGZBK500*400, PGZ-2-1200. These are all models that we can see on a regular basis.

There are many models of radiators, and a radiator suitable for their own home decoration can decorate their home more beautifully, we must choose the radiator suitable for their home according to their own decoration style, a suitable radiator group can not only give full play to his heat dissipation effect, make their own plus more warm, and bring a comfortable feeling to the family. That's the advice given when it comes to choosing a radiator.

The steel radiator of St. Lawrence has been well received by consumers since it was launched in October, and it has a beautiful appearance and good performance, which fully meets the needs of contemporary people for furniture and has become a steel radiator product that everyone is satisfied with.

In addition, the business in the design of steel radiator at the same time not only to consider the size and appearance of the radiator, but also pay more attention to his anti-corrosion ability, we all know that long-term heat dissipation in a humid environment steel itself will inevitably be corroded, over time, the corrosion area will be larger and larger, the surface of the steel is coated with anti-corrosion paint is also essential.

You can get it for free

1. The steel material is generally strong and durable, but it also needs to be checked and cleaned regularly to avoid dust or debris. When the heating is not used, the valves and interfaces should be checked regularly, and if water leakage and seepage are found, they should be dealt with in time.

2. For the sake of beauty, some families add a cloth cover to the radiator, although it is more beautiful, but it blocks the normal heat dissipation of the heating, weakens the air convection, and affects the heating.

3. The steel material needs to be fully watered for maintenance, once the water is emptied, the oxygen in the air will oxidize the inner wall, which is not only easy to leak, but also clogs the pipeline, causing the radiator to be half cool and half hot. In use, do not release water from the system at will, otherwise, there will be less and less hot water in the official road, and the temperature will drop, affecting the heating.

4. The location of the heating cannot be changed at will, nor can it be modified, disassembled and installed without permission, so as to avoid the leakage of the interface and the imbalance of indoor temperature caused by the change of location.

5. When the heating radiator is not used, do not put the wet and hard things on the heating to avoid further corrosion and shorten the life. Do not place heavy objects on it, so as not to bend the heating system, or the pressure will cause the valve and connector to tilt and leak.

Steel radiator household material model:

50 twin tower radiators, steel three columns, new integrated round head, 60 twin towers, 75-75 steel and aluminum radiators, 114-60 copper and aluminum composite radiators.

75 steel aluminum radiator Radiator thickness:

75mm sheet width:

75mm pitch:

5 mm distance from the wall:

75mm pressure:

60 copper-aluminum composite radiator radiator thickness:

60 mm sheet width:

114mm pitch:

8 mm distance from the wall:

75mm pressure:

Twin Tower Radiator Specifications Radiator Thickness:

90 mm sheet width:

50mm pitch:

10 mm distance from the wall:

65mm pressure:

Twin Tower Specifications Radiator Thickness:

100 mm sheet width:

60mm pitch:

10 mm distance from the wall:

65mm pressure:

Integrated round head radiator thickness:

100 mm sheet width:

50mm pitch:

10 mm distance from the wall:

80mm pressure:

6. New 70-63 specification radiator thickness:

70 mm sheet width:

63mm pitch:

10 mm distance from the wall:

60mm pressure:

7. Steel three-column specifications Radiator thickness:

90 mm sheet width:

50mm pitch:

10 mm distance from the wall:

65mm pressure: