Can I reset the system if the computer doesn t turn on?

1) Press F8 immediately after booting to the advanced option appears in the let go, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system (if the reinstallation is also the case, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, or restore the system or reinstall it).

First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system in safe mode, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

If there is a hardware, take out the motherboard battery and put it on the charge, plug and unplug the memory, clean the graphics card, check whether there is a problem with the hard disk, and if it doesn't work, just overhaul it.

It's really not possible to reinstall the system, if you can't reinstall it yourself, go to the maintenance there to find a maintenance person to help you, it should take a little to spend it, if you can't turn on the machine by any method, this is a sudden shutdown, caused by disk damage, one is to deduct the motherboard battery and put it down, one is to put it for a period of time in the boot to try, or you can't repair it.

2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

How to reinstall the system if the computer can't be turned on.

Hello subject! (✧What should I do if the computer resets and can't turn on? Here are a few steps to teach you:

1.Restart the computer, and then press the F8 key during startup to enter the [Advanced Boot Options] menu.

2.Select the [Repair Computer] option in the startup menu and click enter.

3.Open the System Recovery Options dialog box and click Start Repair.

4.When you click [Start Repair], you will start to scan the computer and tell you to find the problem.

5.When a startup issue is detected, the Startup Repair Tool starts automatically.

Once the repair is complete, restart your computer and you'll be back to normal!

In this way, it may be that the reset failed, or it is recommended to reinstall the system directly.

If there is a problem with the system after the reset, it is recommended to reinstall the system.

Tap got it and reset it again.

Here's how to reset your PC when it won't start

When the computer file is destroyed and cannot be started, when entering the boot state, press the F8 key to enter the safe mode, the safe mode is the minimum load service startup mode of the system, if the security room mode cannot be entered, the system needs to be reinstalled; Set the USB flash drive boot first, and use partitioning software to align the solid split partition on the USB flash drive boot interface; Click to restore the system image; When the computer restarts, it will boot from the solid state and install the driver; After the installation is complete, the computer will be ready to use after restarting.

In ASUS Windows 10 laptops, you can perform the initialization operation by following the following steps if you cannot access the system:

Note: Before you do this, be sure to back up your personal data on your computer to avoid losing it.

1) After more than two times of abnormal booting, the system will automatically enter the Windows RE interface (System Repair Menu).

(2) In the 'Troubleshoot' menu, select 'Reset this PC'.

(3) In the pop-up interface, there are two more options, as can be understood from their literal introduction, the first is to delete apps and settings but keep personal files; The second is to delete all personal files and app settings.

In practice, you can choose according to your own needs, if you choose the second option, you must first back up the important data.

Here we take the second as an example: delete all personal files, apps, and settings.

(4) If there are multiple partitions in the computer, the following options will appear, according to the needs of the choice whether to delete only the files in the drive letter with Windows installed (generally refers to the C drive), or delete the files in all partitions, here delete all the drives as an example.

(5) The two options continue to appear, and the meaning of each can be understood literally, and the first one can be used for general reset.

Delete my files only' option: It takes a short time, and the deleted files can also be recovered.

Delete files and clean up the drive' option: It takes a long time, but it will completely erase the files from the computer.

After clicking on 'Delete my files only', a prompt will appear for confirmation, click 'Initialize' to begin.

(6) The computer will then enter the initialization screen and display the percentage of the reset progress.

After the reset is completed, it will reboot into the system installation interface, where it will reboot multiple times, which is normal.

(7) After the above steps are over, the system has been restored, and then we will enter the familiar system configuration interface, which can be configured normally according to its own situation, and will not be repeated here.

After completing the above steps, you can perform the initialization operation.