-
Things: Before I pulled 2m three home, I felt that 2m was too slow to change 4m, the network speed was installed late, and there was basically no network. Telecom helps with testing, and stand-alone networking tests are available.
Telecom comes with a computer to test the response to, an increase of 6m).Tell me that I can set the computer to limit the network speed. If you want to ask a master or experienced friend for help.
Thank you! Don't disturb if you're not sincere!
-
To have enough memory, always take care of the computer's memory junk, and uninstall infrequently used software.
-
With P2P software, you can see that if someone makes trouble, it's better to manage online behavior.
-
Go to the next PAP to monitor the traffic of each machine in real time.
-
It's simple, your LAN is DHCP category, right?
DHCP category.
1.Automatically obtained: plug in the network cable and you can get on (dynamic).
2.Fill in the IP address (static) in the Intel protocol of the NIC
These obscene speed limits are actually running P2P or cyber law enforcement officers to limit the speed through ARP packages.
You just need to use packet catcher software to respond to the ARP protocol, and you're good to go, except for routing, whoever has the most ARP packets is the obscenity.
Packet catching software: Sniffer Pro, Collei, Winshark,
100% accurate IP address, network card physical address can be clearly parsed out, so that the obscene has nothing to hide!
How can I get my console back to my landlord and not be stolen?
A: Only the landlord himself can control the routing, but the landlord will not do it.
The only solution: use anti-P2P, the Internet Enforcement Officer's software, called "AP2Pover", run it when you feel stuck, and the other party's obscene software must be re-run to work. But if it is re-run, your ap2pover will have to be re-run. Endless tug-of-war. )
Note: Don't think that you also use obscene software, it's OK to grab it, this will only hurt both sides, and no one will have Internet speed. (Some whites think that my obscene software version is high.,I have Internet speed.。。 I won't go into detail here).
-
You can log in to the router with both username and password for admin to try. The login method is to enter there in ie**:That's it.,Don't change this:Go in and modify the router settings yourself to set the host of the LAN to your own.。
-
1.If you turn on the ARP firewall, you will be prompted if someone controls it.
2.There's no way for an administrator to control your internet speed through the router.
-
1. Limiting the network speed in the LAN is generally achieved through network ARP hijacking. There are fools on the web in this area, such as P2P Terminator or Cyber Enforcer, that use ARP packages to limit the speed.
2. If you want to find out which computer is running these software, you only need to use the packet capture software to respond to the ARP protocol.
4. If you don't know how to use packet capture software, you can use the anti-P2P terminator gadget to fight against traffic hijackers. Another way is to manually specify the MAC address of the host via the command line to filter out counterfeit ARP packets.
-
A lot of similar software, such as network executives, network assistants, and the like.
It is recommended to learn how to set a locked MAC address.
-
What kind of mobile phone, theoretically it will be much faster, because the packets will be much less transmitted by the data cable, and the data transmission will be much faster. But the computer speed must also be good, and the computer in our office is not as fast as my mobile phone. But I'm a smartphone.
-
It depends on your computer's internet speed.
-
Very slow, I use it to get things down no more than 100kb s per second
-
The next P2P installation on the computer is looking for the operation method.
-
A pump is used for a faucet, the flow of water is fast, and the flow of water is slow for 5 faucets, a reason, or you will mention the speed of the Internet 4m liter 8m, 8m liter special line.
-
Upgrade broadband, upgrade to fiber.
There are a few common reasons why your broadband network is slow: >>>More
Set it in the router, you can limit the uplink and downlink speed for each computer under the router individually. >>>More
Due to the various ways of transmission of computer viruses, and usually have a certain degree of concealment, first of all, we should raise the awareness of computer virus prevention, and pay attention to the following points in the process of using computers: First; Try not to use pirated or unknown software. Second; Back up hard drive pilots and master boot sector data, and back up important data frequently. >>>More
Pro version of Windows
XP retains 20% of the bandwidth by default, which is actually of little use to us individual users. In particular, it is better to make the most of it if it is idle. >>>More
Nothing is absolute.
Feelings are no exception. >>>More