Help plan a mountain bike setup! Connoisseur enters!

1. Are you starting from? Hebei? Which line to take?

Sichuan-Tibet, Qinghai-Tibet, Xinzang? If your plan is to start from Hebei, I suggest you abandon it. The Sichuan-Tibet line can start from Chengdu, and the car can be assembled or bought in Chengdu; Qinghai-Tibet, Xin-Tibet's starting point Xining and Urumqi bicycle industry relative to Chengdu, the choice of accessories and ** may be slightly worse, try to consider buying a vehicle; Or buy the car in Hebei, then disassemble it and wrap it in a loading bag, take the train to the destination, then assemble and debug, and then start the journey.

2. This kind of long-distance riding, there will be a lot of equipment to bring, such as clothing, repair tools, simple hunger food, water, etc., the weight must be more than 20 pounds, so the accessories for loading the car should consider the strength and ** instead of considering the light, it is recommended to use a steel frame and a hard fork, or a suspension fork that can be locked, one is that the road conditions of these three lines basically do not need to be absorbed, and the other is that the suspension fork is heavier and more expensive. If the budget is not high, you can use the eight-stage of Altus or Acera, and you can go to Alivio on the top of the sky, and it is not a waste of money to change the speed of too high-end on a long-distance bus. There will be a lot of things on the rear shelf, so it is not very convenient to use the disc brake, and the disc brake is not as light and easy to use as the V brake, so it is good to buy a better V brake with a few more brake pads.

3. Your height of 1.75 meters can be used with inches and 18-inch frames. But your weight of 60 kilograms is too light, and you will lose more than 10 pounds by the end of the ride. Therefore, it is recommended that you strengthen your exercise before planning to travel, at least 65 kg or more, insist on running or cycling for a certain distance, increase lung capacity, endurance and so on.

I recommend you to buy Merida (***, good value for money).

It is recommended to buy the Merida "Duke" (in '08 it was rated as the most cost-effective car in Merida. First, the axle uses disc brake hubs, and it is more convenient to modify disc brakes, which improves the cost performance.

Second, Merida uses new technology for this year's frame! It's lighter, it's stronger, and the front end is still no-reinforcement technology. Our city has tried:

The Duke's fastest speed is 75 miles per hour, which no one can break. If you're traveling, you must choose it! It rides lightly and is the best among mountain bikes within 4,000 yuan.

3. ACERA's new version of the rear derailleur has a better effect than the previous one, and it is also more expensive than the old one! Make the cost performance better.

Fourth, the new version of the RST fork, the new version of the fork stroke is the standard 80mm.

Fifth, the national joint warranty, the national unified price, large frame warranty for 5 years, small parts warranty for 1 year, consumables are not guaranteed, lifelong free maintenance.

6. National unified selling price: 1798 yuan.

If you travel far by bicycle, the strength requirements for the bike are not very high, and many riders have reported that there are many old friends on the Sichuan-Tibet line who are old 680 level cars, and I think the key is not in the car alone, but in the experience.

1. Frame. The latter should be 10 ATX Pro, 09 Pro and ATX7 at the same level, 10 Pro with ATX8 at the same level, 200 yuan a level higher.

2. The XCR of the three pallets, this fork is very moist at first, but the seal is very general, and it can be very moist if it is well maintained, and it is difficult to say if it is not well maintained. Compared to DART2, the first year is that the XCR is better, and after a year or more, the DART2 is better than the XCR.

3. Jiuyu is a hub brand, 041042 is a very classic set of 4-bearing hubs, DP20 is a disc brake ring, and the self-knitting wheel is hand-knitted, not machine-knitted.

4. The latest 10-speed X7 kit has a crankset, about 1000. For a 9-speed X7 package, you can use the chainring, chain and cassette in the XT package.

5. BB5 brakes are good.

6. PG970 is also good, but if you don't use the X7 crankset, you should use the three pieces in the Himmano XT kit.

7. This crankset is a bit low, the crankset should be a level with the rear derailleur, and the transmission system is more important than the shift. Good cranksets are all with a bottom bracket.

8. The bowl group on the frame, the pedal, can be used with VP.

It is best to choose a reputable **, most of the accessories are bought together, which can help you assemble and debug better, so that you can get 70% of the assembled semi-finished products. It saves trouble and assembly costs.

Happy riding!

The former frame is relatively strong and light, not soft, the flywheel pressure plate can still be connected, there is no big problem, it is consistent, it is nine speed, the accessories are best not to buy, you can find some professional bicycle forums and ** on the purchase, more reliable, the landlord although to match it.

Gong Liu, right.。。 Very good. BB5 cable disc Alivio's transmission...

770 is also available. It's cheap.

Giant has a new car called Taishan, and Merida's Navigator 300 are a little more than two thousand. You can take a look.

I forgot to configure.

Don't consider other brands.

I think 770 is already very cheap for only 2198, and it is completely possible to enter him.

Look at the shape which one you like to choose, the entry car is almost the same. Even the oil dish is the lowest-end, not as good as the high-end line disc. There is also the brand of Xidesheng are stinky from their own low-end cars, their own good cars, people ride 300 places, say your car and my brand, hundreds of dollars, very beautiful.

What do you think? And then there's the fact that his logo is really ugly. I suggest Giant, I upgraded from the 770 step by step, which is pretty good.

The cost performance of the 11 models is not as high as **.

Giant cost performance, I ride again, it's very cool.

System Project Brand-Model **.

Body frame V-KET 6022 alloy mountain frame 420

Fork Suntour XCM V2 locks fork 260

Stem Bat Caliber CNC Stem Straight Handlebar Three-Piece Set 150

Handle the horizontal bat caliber CNC stem straight handle three-piece set

Gasket ring frame sends.

Grip Taiwan TNT lockable grip 30

Bowl set frame sends.

Seat, Bat, Caliber, CNC Stem, Straight Handlebar Three-Piece Set

Seat cushion vader **Seat cushion 40

Seat clip frame sends.

Brakes Shimano M422 V + FR5 lever 112

Conduit JW White Conduit Set 25

Transmission Crankset Shimano Alivio Spline Crankset Split Dip Kit 620

Bottom bracket Shimano Alivio spline chainset split derailleur kit

Pedal Wellgo M-20 Bearing Pedal 65

Tower wheel Shimano Alivio spline crankset Split derailleur kit

Chain Shimano Alivio spline chainset split derailleur kit

Wheels: Hubs, Quantum, Disc Brakes, Hubs, 220

Rims Alex DH19 V brake rims

Spokes Wanhua spokes

Pad with FSA Pad 10

Inner tube built large 24

Outer tire built large tooth tire 50

Variable speed derailleur Shimano Alivio spline crankset split derailleur kit

Front derailleur Shimano Alivio spline chainset split derailleur kit

Rear derailleur Shimano Alivio spline chainset split derailleur kit

Total: 2,026

That's it, I helped my classmates install this configuration, not bad. You refer to it.

Below 3000 does not consider the group, this budget is recommended to buy a whole vehicle, recommend ATX770 or Duke Merida.

One is to go to the Tianjin Bicycle Garden on the **.

The other is to buy a whole vehicle, Duke Merida 500, which is more cost-effective.

It's better to buy a whole vehicle in 2000 Merida Warriors, Dukes, these are good, better than assembly!

Hello, glad for your question :

Merida Warrior series, basically meets your requirements

More than 2000 can assemble one by yourself, more cost-effective than the whole vehicle, the front fork can use Himano's XCR, the variable speed Himano M410 kit is good or M390 is OK, the general mountain bike frame can be installed on the rear shelf, you can directly buy the frame of Giant, in fact, the frame of the big cat is also good.

The M390 was released one year after the M430 was launched, and it is the product of Shimano's decentralization of technology, improving on various recognized shortcomings of the M430, and even the 24-speed kit M410 is rated higher than the M430, I don't know who said that the higher the number, the better.

The M390 is now the entry-level 27-speed kit that surpasses the legendary M410, so I don't have to repeat what to choose.

In addition, the decentralization of technology refers to the division of higher-level technology into low-level kits, although the 2012 M390 belongs to the ACERA level, but it is definitely better than the 2011 M430 (Alivio), the only difference is that the finger dial can not be released in both directions.

The durability of the oil disc is still very good, especially Shimano's.

Frame V-KET 6022 (can be installed with rear shelves, double bottle cages, fenders, very suitable for long-distance use, good appearance, the key is that the price is good, my new car uses this) 410

Fork aluminum top tube 2011 Rockshox Tora T** control pure disc brake (durability and run-off are very good, and the wire lock-out function is also very convenient) 850

Kit: Shimano Deore M595 Oil Disc Large Kit (no disc with hubs is OK) 2200

Disc: Shimano RT62 RT64 RT78 RT79 (**Buy it, choose any new one) 130-300

Rim: Alex DP20 100

Spokes: pillar

Tires: Kenda K1047 small eight pieces 100 (it is recommended to use Kenda K895 + K910 + puncture-proof tire pads for long-distance running, but this combination is a little too expensive).

Group: It's casual 140

Saddle velo plush Comfort type nice cushion 50

Pedals Shimano M520 + plastic sheet (regular shoes can be used) 250

Or you can use Wellgo's bearings 60-180.

It's almost, there is a problem to supplement, it shouldn't be so expensive, if you don't feel good enough, supplement the problem, I'll take a look.

5,000 yuan can fit a good car, enough for you to run all over the country. I'll introduce you to a consultant, it's a local bike dealer you can consult. 0551-5127122

It is recommended to choose the 2010 Merida Challenger 350, **3600-3700, Merida frame expandability is good (it is very convenient to install shelves), the top line disc BB7 is used, which is less prone to problems and easy maintenance than oil discs, and the front fork is DART2, locked, and very leathery!

It is possible to buy a whole car for travel.

If you really need a road bike, the Giant Wind 900 or the Wind Beacon 2200**It's not expensive, barely meet your requirements, but it's a beam change, and the operation has great shortcomings, but if you want to buy a hand, the cheapest is the wind vane 2700, the original price is two thousand, I don't know how much you can get a discount there.

I also ride a bicycle to school, so how long is the section that I can actually drive at full speed? Therefore, I personally think that it is better to go to school or in the mountains, and it is more flexible to cope with vehicles, so it can pass relatively lightly when encountering various situations, unlike road cars, which are less stable, so that they are not much slower than road cars. A classmate rode a Giant.

A few hundred dollars, very cheap) can also ride at a constant speed of 30 kilometers per hour, which has a lot to do with personal physical strength, so you don't have to deliberately buy a road bike for speed, it is best to suit your riding needs.

For example, a thousand dollars or so in the mountains.

painwolf

In addition, the ATX series is slightly more expensive, and if there is a discount, the low-end models can basically meet your requirements.