Which kind of floor heating is good for home renovation installation?

Updated on home 2024-04-30
7 answers
  1. Anonymous users2024-02-08

    Comfort, hygiene, health care: Ground radiant heating is the most comfortable heating method, the indoor surface temperature is uniform, and the room temperature gradually decreases from bottom to top, giving people a good feeling of foot temperature and cold head; It is not easy to cause polluted air convection, and the indoor air is clean; Improves blood circulation and boosts metabolism. Electric underfloor heating is comfortable, and the indoor temperature can be adjusted at will

    The alternating current thermostat installed in each room allows you to adjust the room temperature within the set temperature range, so that people can save heat as flexibly and conveniently as "water saving" and "power saving". Occupancy floor height: Electric floor heating is the only floor heating that does not need cement backfill under the composite wood floor, and it is the thinnest floor heating at present, and the height of the occupied floor.

    Green environmental protection, no pollution to the environment: electric floor heating does not produce smoke and dust when running, there is no noise and floating dust caused by indoor air convection, in line with the requirements of urban planning, suitable for the requirements of modern society green environmental protection. Low temperature operation, safe and reliable:

    When the system is working, the electric underfloor heating surface is kept at a low temperature, and the maximum temperature does not exceed 60 degrees Celsius. Therefore, there will be no accidents such as scalding, causing ** and fire, and the whole system is connected in parallel, with stable operation and high feasibility.

  2. Anonymous users2024-02-07

    Underfloor heating is considered to be the most comfortable heating method nowadays, and many people give up the heating method of radiators in favor of underfloor heating. At present, there are two types of floor heating methods: electric heating and water heating. Electric floor heating and water floor heating both have their own advantages, can not be generalized to determine which kind of floor heating is good, can only be based on the actual needs and use of their own suitable floor heating.

    Comparison of pre-installation costs: The pre-investment cost is a problem that consumers are more concerned about, and three points of electric floor heating lie in the installation, and seven points lie in the quality. Water underfloor heating is the opposite, using seven points of installation and three points of quality.

    Generally speaking, the installation system of water floor heating is composed of multiple combinations, but electric floor heating is independently designed and manufactured by a brand, and the whole system is safe and secure. After the comparison of the two, it is recommended that the heating area is 90 square meters and the electric floor heating is used, the floor heating is 90-160 square meters, and the plumbing is more cost-effective. Comparison of daily use costs:

    The cost of electric floor heating, if you use electric floor heating, the heat load per square meter is higher than that of water floor heating, according to 130w per square meter to calculate, 100 square meters of heat load is 13kw per hour, according to the whole day of operation 12 hours to calculate, the required heat dissipation is 156kw, according to the average electricity cost of the original calculation of the daily operating cost in yuan, then the operating cost of electric floor heating for a month is: yuan, the use of electric floor heating in a heating season is: 6552 yuan.

    If the cost of using water and floor heating is a water floor heating system, taking a 100 square meter room as an example, the average heat dissipation per unit is assumed to be Q = 40W m2 (this assumption is the same for both). Then the calories that need to be consumed per unit time of a 100 square meter room are: 40*100 = The calories that a square meter room needs to consume in a month is:

    4000×30×24×60×60=10368×1000kj。

  3. Anonymous users2024-02-06

    Floor heating: The installed cost of 80 square meters of house water floor heating is about 10,000 yuan and 30,000 yuan, which is open for 15 hours a day, and the energy consumption cost is about 4,500 yuan in winter. The comparison of the use cost of water floor heating and electric floor heating first assumes that water floor heating and electric floor heating should reach the average heat dissipation of 40 watts per unit of square meters, and the building and ambient temperature where the two are located are the same, the room insulation performance is the same, and the loss in actual operation is the same.

    Take 80 square meters of heating area as an example, the heat consumption per unit time is: 40 80 = 3200 watts, the heat consumption of 1 month is 1176 yuan per kilojoule electric floor heating operating fee, the heat energy converted by 1 kilowatt-hour of electricity is 3600 kilojoules, the thermal efficiency of electricity is 98% of the heating operation cost of 645 yuan per month, according to the combustion efficiency of 90% of the imported boiler, the actual consumption of natural gas is: cubic meters, according to the natural gas ** of yuan cubic meters, the cost of heating a month with natural gas boilers is:

    258 yuan, calculated according to the annual use of 3 months: the annual operating cost of electric floor heating is 3525 yuan, and the water floor heating is 1935 yuan.

  4. Anonymous users2024-02-05

    Floor heating is good with brands such as George floor heating, Weixing floor heating, Watts floor heating, Liansu floor heating, Poly floor heating, etc.

    1. George underfloor heating

    George, also known as Georges Fischer, a Swiss imported brand and part of the Georges Fischer Group, is a globally operating industrial group with 80 companies in Europe, 35 companies in Asia and the Middle East, 12 companies in the Americas, and 2 companies in Australia.

    GF Group is the world's leading manufacturer of high-quality plastic piping systems, offering more than 60,000 products and providing a one-stop shop for procurement.

    2. Weixing floor heating

    Weixing Floor Heating belongs to Weixing Group, specializing in the production of PP-R water supply pipes, PVC drainage pipes and other pipe fittings, referred to as Weixing Pipe Industry. It is the technology pioneer and leading enterprise of PP-R pipeline in China, and one of the enterprises with the most complete product support, the largest production and sales volume and the most timely supply service in China's plastic pipe industry, and is the vice president unit of China Plastics Processing Industry Association and the vice chairman unit of the Plastic Pipe Professional Committee of China Plastics Processing Industry Association.

    3. Watts underfloor heating

    Watts Floor Heating belongs to Watts Water Industry Group, headquartered in Italy, divided into Italy Watts, American Watts, Germany Watts, a century-old brand, quality assurance. Watts is the world's leading manufacturer and service provider of innovative aquatic products. Watts is committed to providing customers with comfortable, safe, energy-saving and environmentally friendly solutions to accelerate their sustainable development process while reducing their costs.

    4. Liansu floor heating

    Liansu Floor Heating is a subsidiary of Lesso Group, which is the largest manufacturer of plastic extrusion production equipment for plastic pipe machines in China. The group's main business projects are plastic pipes, steel-plastic pipes, plastic machines, building appliances, plastic profiles, decorative building materials, plumbing equipment and international investment, and its business and service network covers major cities in China and more than 30 countries and regions in the world.

    5. Poly floor heating

    Poly Floor Heating is a subsidiary of iKang Group. In terms of quality, Poly floor heating is a good choice. Poly floor heating is caused by the change of molecular structure of high-density polyethylene after irradiation. Poly floor heating has strong temperature resistance, compression resistance and blasting resistance.

  5. Anonymous users2024-02-04

    I haven't heard of the brand so much to say, but anyway, try to find a better one, such as Rubens's should still be good, this is what we use more, as well as Rifeng and Taurus, as long as you give a good warranty.

  6. Anonymous users2024-02-03

    In 2022, the top ten brands of floor heating are Vaillant, Emerson, Nexans, Oventrop, Enstor, Halmburger, Danfoss, Uponor, and TPTP

    Electric floor heating per square meter from 100-280 yuan, the quality is also uneven, 120 square meters about 20,000 yuan, the general warranty is 2 to 3 years.

    Basically, it's all foreign.

  7. Anonymous users2024-02-02

    It's inconvenient to say more about the brand that I haven't heard, but try to find a better one anyway, like Rubens's should still be good, this is what we use more, and we want to be rich, as long as you give a good warranty.

Related questions
13 answers2024-04-30

So which bar counter is right for you in home renovation? Table style: Combine the dining table with the bar so that the bar counter doubles as a dining table, which can generally be designed in a "T" or "L" shape. >>>More

7 answers2024-04-30

If you agree to "never give up 197868", it is recommended to install Korean far-infrared carbon fiber floor heating. >>>More

14 answers2024-04-30

Learn about decoration knowledge and understand the material of interior doors!

7 answers2024-04-30

No matter how good the curing agent is, it is not good at home.

14 answers2024-04-30

There are many materials used in the home decoration art wall, specifically in the following 3 forms for the reference of the landlord. >>>More