It s going to be renovated, and it s good to use that kind of floor heating.

Updated on home 2024-02-09
7 answers
  1. Anonymous users2024-02-05

    If you agree to "never give up 197868", it is recommended to install Korean far-infrared carbon fiber floor heating.

    Eight advantages.

    Health heating far-infrared carbon fiber heating panel floor heating generation generates far-infrared rays to radiate to the room after being electrified, and directly heats indoor objects and human bodies through radiation, so that its own temperature rises. The far-infrared rays in the 8-15U band are medically called "life light waves", long-term in such an environment, can promote metabolism, promote development and growth, relieve nerve pressure, improve human immunity, and have a very good effect on stubborn diseases such as joint pain, rheumatic numbness and geriatric diseases caused by the cold and humid environment, especially for people who have been in a sub-healthy state for a long time has very valuable benefits, and far infrared rays have always created a warm and healthy living space under the sun.

    Comfortable Far infrared rays achieve the heating effect through radiation like sunlight, just like basking in the sun in winter, which will not affect the fresh quality of indoor air, will not have a feeling of dryness and heat, and has the effect of moisturizing and heat preservation; The heat radiates from the bottom to the top, and naturally forms a gradient temperature difference from the ground upward, which not only makes the human body feel very comfortable, but also more in line with the TCM health mechanism of "cool head and warm feet".

    Energy-saving heating far-infrared carbon fiber heating plate floor heating after electrification, relying on carbon molecules to do Brownian motion to produce far-infrared rays and heat energy, not like metal heating materials simple electric heat conversion to generate heat, is currently the highest electric heat conversion rate of heating materials to reach more than 99%, with a very considerable energy-saving effect; Save more than 30% of energy consumption by air conditioning and heating compared with the same period; The compartment intelligent control is more energy-efficient, and the system stays warm longer and more effectively after it stops working.

    Environmentally friendly heating far-infrared carbon fiber heating plate floor heating will not produce any pollution such as sound, light, sewage, exhaust gas, electromagnetic radiation and so on.

    Safety heating far-infrared carbon fiber heating panel floor heating has intelligent, wear-resistant, corrosion-resistant, radiation-resistant, waterproof, insulation, breakdown-resistant, flame-retardant and other high-tech properties; The heating plate is powered on, and its own intelligent temperature control does not exceed 60, there is no local overheating, and the system is connected in parallel and has a leakage protection system, which is safe and reliable and will not cause potential safety hazards.

    Simple heating far-infrared carbon fiber heating plate floor heating is 100m2 super large roll, can be cut on demand, suitable for installation on any plane occasion, and can be installed and reused for many times, ordinary residences, construction can be completed on the same day.

    Maintenance-free heating Far infrared carbon fiber heating plate floor heating system is installed in place at one time, no human damage can ensure the safe use of the system with the same life as the building, the heating plate has no attenuation, does not need any material update and maintenance.

    Aesthetic heating far-infrared carbon fiber heating plate floor heating system with a total thickness of less than 1cm, does not affect the height of the floor and has the function of automatic leveling of the ground, and there is no part in the room except the thermostat to show the noble beauty.

  2. Anonymous users2024-02-04

    Underfloor heating isn't really good. Because with underfloor heating, you can only choose tiles for your floor. Wooden keel-paved floors are no longer good. Because wood is insulated.

    There are three modes of heat transfer: heat conduction, heat radiation, and heat convection.

    Ordinary radiators use heat convection to heat the air temperature, so they must be installed under a window.

    Underfloor heating, on the other hand, uses heat conduction to transfer heat to the floor first, and then transfers heat to the air through heat convection.

    Floor heating is not a good thing for ordinary users, but it is a good thing for the heating sector, because floor heating is energy-saving.

    That is to say, when the human body temperature is the same, the temperature of floor heating is relatively low.

    Science must not be false.

  3. Anonymous users2024-02-03

    If you plan to install underfloor heating, we recommend that you install carbon fiber underfloor heating! Truly energy-efficient and durable! Safe, convenient, clean and worry-free!

  4. Anonymous users2024-02-02

    Under normal circumstances, floor heating is better, but there are installation restrictions, requiring installation before laying the floor, and wall heating I think is a substitute product for insufficient floor heating, which cannot be said to be bad, but it will occupy some wall space. Here's a look at the benefits and advantages of underfloor heating:

    1.Compared with air conditioning heating, air conditioning heating is a heating method for heating air, indoor dry heat, peculiar smell, water loss, dry mouth, indoor dust, dirty air convection and other phenomena, using graphene electric heating film heating, radiation far infrared direct heating, far infrared and sunlight waves in the same belt, medically become the "light of life", so use it to heat as warm as the sun.

    2.Compared with pipes: Pipes can not only keep warm, but also provide domestic hot water, which is incomparable to other heating methods.

    However, repairs are required every year after pipes are prone to water pipe rupture, resulting in high maintenance costs. It brings a lot of inconvenience to life. After installing the graphene electric heating film, there is no need to clean, add or replace materials, and it will not cause any damage for more than 30 years.

    3.Electric floor heating also has the following advantages: the temperature is concentrated in the main area of human activity below the meter, and the energy saving is more than 30; The conversion rate of electric heating film is high (more than 80), and the electricity consumption time is 1 4 of the use time, which is 25 of the energy consumption of air conditioning; Silent the whole heating process, no light, no pollution, worthy of the name of healthy, energy-saving, comfortable green products; No occupations: This area is conducive to interior beauty and decoration, increasing the actual effective space of the room; The single rooms are controllable, and each room is equipped with an independent smart thermostat to meet the requirements of energy saving.

    The power conversion rate of the far-infrared electric heating film heating system reaches more than 80, and the electric energy is basically completely converted into thermal energy. As a result, electric heating films are more energy-efficient.

  5. Anonymous users2024-02-01

    If you pursue no space, uniform heat dissipation, and energy saving, installing floor heating when decorating a house is a good choice; If you are worried about damage to wooden furniture in the future, the air is too dry, it is troublesome to repair, and the shelf life of food will be shortened.

    Pros and cons of floor heating: Generally, the traditional hanging heating is placed on the bright side, which not only takes up space, but also has to package it when buying a house for aesthetic beauty, which is very troublesome.

    Compared with hanging heating, floor heating will not take up too much space, can greatly improve the utilization rate of space, although floor heating is spread on the ground, will occupy a certain layer height, but most people will not have the feeling of space compression, the impact can be said to be minimal. Therefore, laying floor heating is still very in line with the aesthetic needs of modern people.

    Second, the heat dissipation is more even, and the residence is more comfortable.

    Floor heating should not only be larger than the hanging heating heating area, but also the pipe laying is intensive, the heat storage is large, the heat dissipation is relatively more uniform, each room will not appear too much temperature difference, people from the feet to the head, can promote blood circulation very well, more suitable for the physiological characteristics of the human body, living comfort is still very high.

    Third, it is more energy-efficient.

    Hanging heating heat dissipation is uneven, and the heat source can often only be felt near it, so although many homes have heating, they usually need to turn on air conditioning, small sun or electric heating and other auxiliary heating. In this way, the installation of floor heating is still very good, not only energy saving, but also can save a lot of electricity bills, killing two birds with one stone.

    Fourth, it is easy to damage wooden furniture.

    Although the floor heating effect is good, it is laid on the ground, it will inevitably come into contact with the wooden floor or furniture, and the wood material is easy to crack, warp or bulge when heated at high temperature for a long time, which greatly affects the decoration and beauty.

    Fifth, the indoor air is too dry.

    After turning on the floor heating, the temperature of the room rises, the indoor air will become drier and drier, if you live in this environment for a long time, it is easy to get on fire, dry mouth, peeling and other conditions, if you don't often open the window for ventilation, or don't often use the humidifier, you will feel very stuffy.

    Sixth, overhaul and maintenance troubles.

    No matter what has its best service life, although the materials for laying floor heating are very good now, but with the passage of time, the pipes will slowly age and block, which will directly affect the temperature of the floor heating over time, so in order to improve the quality of living as much as possible and extend its service life, it is best to maintain it regularly and clean up the blockages in the pipes.

    However, in this way, the floor will be lifted, the amount of work is very large, and the cost is certainly not cheap.

    Seventh, the shelf life of food will be shortened.

    Some families are accustomed to putting the fresh vegetables and fruits they buy on the ground, but turning on the floor heating in winter will accelerate the loss of water and make it difficult to keep fresh, especially those ingredients that cannot be put away will spoil faster and attract mosquitoes. If you don't pay attention to the installation of underfloor heating, it will be very bad.

  6. Anonymous users2024-01-31

    Advantages of home installation underfloor heating.

    Outstanding energy saving: floor heating belongs to the radiant heating method, which has higher thermal efficiency than the convection heating method, and the floor heating can concentrate the heat within the height of the human body; Small heat loss during transfer; At the same time, users can also flexibly adjust according to their own use to further effectively save energy.

    Scientific, healthy, comfortable and has a health care effect: the full name of floor heating is low-temperature radiant floor heating, which is by far the most comfortable heating method for human beings, the indoor surface temperature is uniform, and the room temperature gradually decreases from bottom to top, giving people a comfortable feeling of warming their feet and cooling their heads; Because the hot air rises naturally, there is no air agitation, it is not easy to cause polluted air convection, and the indoor air is clean; Improves blood circulation and boosts metabolism, making it ideal for families with elderly people and infants!

    Floor heating does not occupy space, and the use of the room is more flexible: Floor heating is a hidden project, and there is no radiator and branch pipe to occupy space, which increases the usable area of the living room from the side and can expand part of the indoor space.

    Long service life: The plastic pipes or heating cables used in floor heating are buried in the ground, with good stability, no corrosion, no human damage, and the service life is synchronized with the building. The price reduces the user's maintenance cost.

    Relatively low operating costs: about 20% energy saving compared with other heating equipment, so that you can make full use of low-temperature hot water resources or take advantage of the electricity price policy to reduce operating costs.

    Good thermal stability: the ground layer and concrete layer of floor heating have a strong heat storage capacity, and the indoor temperature changes slowly under the condition of intermittent heating.

    Disadvantages of home installation underfloor heating.

    Floor heating occupies a certain layer height: floor heating occupies a floor height of 5-7 cm (the selection of insulation materials, floor heating pipes is different, the construction plan and method are different, and the impact on the floor height is different).

    Short repair life: When the floor heating system is in operation for 2-4 years, the floor heating pipeline produces scale, which needs to be cleaned by professional equipment, otherwise it will directly affect the heating effect.

    Toilet use is limited: due to the complexity of the heating pipes of floor heating, for waterproof considerations, the floor heating coil must be waterproof before and after laying, due to the small scope of toilet laying (such as to reserve toilets, bathtubs, drains, etc.), the room temperature often does not meet the heating standard, and it needs to be supplemented by radiators.

    Not easy to maintain: floor heating is a hidden project, and materials with good pressure, temperature and corrosion resistance and good thermal stability should be selected when decorating. It is not convenient for secondary decoration, because the pipeline is laid underground, and when the ground is transformed, it is easy to damage the underground pipeline.

    And it is not suitable to lay decorations on the floor, which is easy to affect the heat dissipation effect.

  7. Anonymous users2024-01-30

    a) The benefits of installing underfloor heating.

    1. Strong comfort.

    In the process of household floor heating, the floor heating adopts a scientific heat dissipation method. Suitable for the physiological characteristics of the human body, it gives people a sense of comfort and hygiene. Underfloor heating is also recognized as the most comfortable way to heat a home.

    Especially in winter, it is necessary for the elderly and children to install floor heating in winter, and it is affordable to keep warm and provide a comfortable and warm environment.

    2. Strong sound insulation.

    When laying underfloor heating, the insulation layer is added, and it has a very good sound insulation effect. The sound of floor heating is low and does not affect people's normal work and rest.

    3. It does not take up space.

    Generally, the installation of floor heating in the family is installed under the floor, which will not affect the appearance and does not occupy indoor space, which is conducive to providing a larger space for decoration, and families with small indoor area can give priority to it.

    b) the disadvantages of installing underfloor heating.

    1. Inconvenient maintenance.

    Since the underfloor heating is underfloor, it is troublesome to renovate and easy to damage the underfloor heating pipes. If you are decorating underfloor heating at home, please be sure to supervise the operation and process of the renovation workers. When decorating, we must put an end to the existence of small problems, and the decoration should be first-class, so as to lay a good foundation for a better life in the future.

    2. Slow heat dissipation.

    Underfloor heating is low-temperature heating, and it requires a large area to heat floor, cement and surface materials. It needs to be turned on for a long time to heat the room, so it takes a long time for floor heating to be heated, which is not conducive to the situation of urgent heating.

    Third, the floor or tile for floor heating.

    1. From the point of view of the material itself.

    Due to the relatively poor thermal conductivity of wood materials, therefore, when laying wooden floors, after the floor heating system is turned on, the temperature rises relatively slowly, but it is precisely because of its relatively slow thermal conductivity that after the indoor temperature reaches the rated temperature, its thermal insulation effect is also relatively good, making people feel that the whole house is warm.

    Porcelain floor tiles conduct heat quickly, after the floor heating system is turned on, the indoor temperature rises faster, and fast heat conduction means that the heat dissipation is also fast, and the feeling may be relatively good in summer, and there is no warm effect of wood floors in winter.

    2. From the perspective of environmental protection.

    When a substance is heated, it often undergoes a chemical reaction, which may release substances that are not good for your health. The tiles are fired at a high temperature of at least 1,200 degrees Celsius, and the heating of the underfloor heating system is far from reaching this temperature, and from an environmental point of view, the tiles will not be heated to increase the release of radioactive materials.

    Because the wood material is heated and dry, it will deform and arch, so laminate flooring is suitable for installation on top of underfloor heating systems. As long as the laminate flooring meets the national environmental protection standards, there is no adverse effect.

    Summary: For the installation of floor heating, whether to choose flooring or tiles, or according to the actual situation of the owner's family, the best is suitable.

Related questions
28 answers2024-02-09

The floor decoration materials for home decoration are mainly divided into the following six categories: tile marble, solid wood flooring, laminate flooring, laminate flooring, bamboo flooring and cork flooring. Briefly introduce the main characteristics of these kinds of floor decoration materials. >>>More

10 answers2024-02-09

What is the best method to use for decoration and deodorization: Virgin titanium technology uses a pollution absorbent to absorb gas-phase pollutants in the indoor air. This indoor air pollutant absorbent is a new generation of high-tech green products developed by using safe, efficient and fast indoor air purifiers recommended by the World Health Organization, which activates the absorbent liquid through the activator to strongly absorb indoor air and decompose formaldehyde, benzene, ammonia and other pollutants in the air. >>>More

5 answers2024-02-09

The cost of maintaining old customers is minimal, and after opening the store for a long time, you will find that there are fewer and fewer new customers, and the vast majority of customers served are old customers. Instead of spending more effort on developing a new customer, it is better to maintain the old customer, which may in turn get more new customers. In this article, let's talk about how to keep those customers who have lost back, and Xiaoji has sorted out the following methods, let's take a look at them together. >>>More

9 answers2024-02-09

Combined with the overall style of your home decoration.

32 answers2024-02-09

It is better to use a single strand because it is easy to operate when wiring; The wiring of multiple strands needs to be tinned, which is generally inconvenient to operate at home; Joints without tinning are easy to heat up and have poor contact; >>>More