Why can t the iPhone turn on suddenly?

It's out of power. Plug it in and it will automatically turn on in about 10 minutes.

What are the generations of your iPhone? And there's that version. If the problem is not clear, how can you tell you how to deal with it?

After the Apple phone is turned on, it keeps showing the Apple logo and cannot be turned on, which may be because the mobile phone has entered the system protection state due to low battery, software problems or hardware problems.

Reasons why the Apple phone can't turn on:

1. There is no electricity. If all the battery power is consumed, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on.

2. Software malfunction. If you are sure that the current battery of the mobile phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of the mobile phone. At this time, we can choose a professional iOS system repair software

Tenorshare iPhone Repair Tool to repair or clean up.

3. The system crashes, and the solution is as follows:

1. On PC or Mac ** and install Tenorshare iPhone Repair Tool (REIBOOT - iOS), then launch the program. If you have any other questions, you can contact customer service directly.

2. Select "Standard Repair" or "Deep Repair" according to the specific situation.

Note: Standard repair will not cause data loss, but deep repair will cause data loss, so you need to back up data in advance.

Note: The repair process will take about 10 minutes, please do not disconnect the connection between the computer and the mobile phone during this process, after the repair is completed, the repair success interface will pop up according to the prompts.

If the standard repair doesn't fix your iPhone system issues successfully, you can also choose to use the Deep Repair feature. However, as mentioned earlier, deep repair will cause data loss, so make a backup in advance.

If you want to know more about repairing iOS system, we recommend you to choose Tenorshare iPhone Repair Tool. Tenorshare iPhone Repair Tool can fix simple iOS system problems in standard repair mode without data loss, and easily repair 150+ iOS device white apples.

System issues such as black screen, non-stop restart, stuck in recovery mode, update failure, unable to boot and so on; At the same time, using the Niu Xuechang iPhone repair tool is simple and efficient to operate.

After the Apple phone is turned on, it keeps showing the Apple logo that it can't be turned on is a system running error, and it can be solved by force restarting, and the specific steps are as follows:

1. First of all, press and hold the home button at the same time, as shown in the figure below

2. Release the home button after the black screen, and the power on and off button will not be released, as shown in the figure below

3. After the apple logo appears, do not release the power button at this time, and wait for the white apple logo to disappear, as shown in the figure below

4. In this way, the forced restart of the Apple mobile phone can be completed, as shown in the following figure:

The iPhone keeps showing that Apple just can't turn on when it turns on. Hello, the iPhone has been showing the Apple logo when it is turned on, and if you can't enter the system, it should be that the system is broken, and you can only redo the system. Or you can change the motherboard.

Hone 11 (System version: iOS

The handling method of the Apple mobile phone not turning on and only displaying the Apple logo is divided into five steps, and the following is the specific operation introduction:

1.Turn off your phone.

After the phone is turned off, press the volume up button first, and then press the volume down button.

2.Press and hold the power button.

Then press and hold the power button and release it when the Apple logo appears.

3.Press and hold the power button again.

Press and hold the power button again until you enter recovery mode.

1. When the white apple appears, press and hold the switch + home button, let go of the black screen, and then press power to turn on, and then we wait for a while, at this time it is still a white apple, and then press the volume plus and minus, you can click on it twice, and then press and hold the two together, note, it is still a white apple, and then press and hold the switch + home button again, the black screen will let go, and then press power to turn on, this time we don't need to press the volume plus and minus again, if the above steps are not wrong, it should be able to turn on normally.

2. If there is still a white apple, press the power and home together, wait for the black screen, immediately press and hold the power and volume buttons, and then wait for the screen to go black after seeing the white apple, and finally press the power button or connect the data cable (the data cable is connected to the computer) After seeing the white apple that starts again, you can enter the system, and then uninstall the cydia plug-in installed for the last time after entering, and then restart the white apple will not appear.

If the above method still does not solve the problem after testing, then you can try to reflash the system.

The solution to the iPhone won't turn on:

Apple mobile phone can not turn on first to determine, is it because of the reason that the mobile phone battery is dead, first charge the mobile phone for a while and press the power button to see, it may be because the mobile phone is not low enough power to cause the mobile phone to not turn on normally.

In this case, the Apple mobile phone can't be turned on, and it may be that the phone is in a dead state, you can also try to press and hold the power button at the same time, the power on button + home button, wait a few seconds, and the phone will generally restart automatically.

There are usually Apple mobile phones in the process of flashing or updating and upgrading, you will also encounter the problem of not being able to turn on, and the problem of not opening the machine caused by this reason is usually caused by the improper operation of the mobile phone flashing or system upgrade.

If the above methods cannot solve the problem, then it may be a hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to contact Apple to repair and solve this problem.

Make sure your phone has a battery first, plug in the charger and see if there is a charging icon coming out. If not, press and hold the Power on + Home button at the same time, and release it when the Apple logo appears on the screen for about 15 seconds, and wait for it to turn on. If there is no response after pressing, try to manually enter DFU mode, open iTunes on the computer, connect to the computer to see if it can be recognized, if none of the above works, prove the hardware problem.

Contact after-sales for consultation and repair.

1. Please press the "Power and Home Screen" button at the same time, keep it for more than 10 seconds, and force restart the phone.

2. If the white apple is still displayed on the screen, you need to press the "Home + Power" button on the main screen at the same time until the screen is released without a black screen.