What should I do if the Taipower C700SP can t turn on A few times before I messed up .

As long as the screen can still be lit, no matter what appears, it can be repaired As long as you enter the engineering interface and reflash the firmware, it is good Method: The official website of the radio station has firmware, which is also on the official website** There are also those who don't understand, you can also ask the after-sales service of the official website.

Look at how talented you are, hehe.

This is the XP computer solution.

When the upgrade fails, the computer cannot be turned on, and the hardware cannot be found when connected to the computer, please follow the steps below to fix the problem.

1) When not connected to the computer, press and hold the power on and off for 7 seconds to reset the machine.

2) Open the firmware upgrader and select the firmware program (i.e. img file); Click on "System Upgrade". The program may see the phrase "Device not found". Ignore it, and don't point to it.

3) Press and hold the M button.

4) Connect the machine with the computer and wait for about 15 seconds;

5) Still press and hold the M button, and press the power on and off button 5 times in a row.

6) Then the upgrade program will automatically capture the device and the upgrade will be completed;

This one is win7.

The first 5 steps are the same, but then we have to find them manually.

Find "Open Device and Printer", there is an unknown device, right-click Properties - Hardware - Properties - Drivers - Follow the new driver - Manually find and install the driver, browse, find the driver as shown in the figure, OK, pop up the dialog box and click yes, and then wait for the installation, remember not to find the device that is OK, otherwise you have to do it again, after the installation is completed, the rest is not explained.

The firmware is broken, try to brush it from the new, it's really not good to find after-sales, this repair doesn't cost money.

These things basically don't work, it is recommended that you go to ** a version of the upgrade firmware, and then open the upgrade software, force the upgrade, continue to operate according to the above six operation steps, the system will automatically scan the driver from Windows Update and install it, and then your Taipower will be upgraded successfully Remember to be sure to ** a version of the upgrade firmware, I failed after the black screen, just used this method to upgrade successfully.

2. Press and hold the power button for more than 7 seconds to reset before upgrading.

3. Turn off the computer anti-virus software for the time being.

4. Strictly follow the tutorial prompts to re-operate.

Kiss! Hello.

Please go to the official **, re-upgrade, please be sure to follow the specified procedures, otherwise it is easy to damage the software. If this is still the case, please go to the after-sales point to be responsible for the upgrade.

Hello: When you encounter this situation, it is recommended that you flash the firmware again, and you can flash the phone even if it cannot be turned on.

1. You can go to Taipower's official **(

2. Open the upgrade tutorial, there will be a detailed process, please follow the upgrade tutorial prompts.

3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.

4. If you are still unsuccessful in upgrading, you can take the machine to our after-sales service point, our engineers can provide you with upgrade services, Taipower service outlets across the country query:

This may be a broken firmware.

Do you usually have any bad operations? Such as forcibly shutting down and so on.

Anyway, press and hold the power button for 20s, and then flash the machine.

Or press rest20s and then press the power button for 20s, and then flash the machine.

I can brush it for you + I'll do it.

Get a toothpick, directly barrel the reset control, and you can reset.

Got it!

It's useful.

This one is the restart button.

2. Before upgrading, press and hold the button to reset the camera for more than 7 seconds.

3. Turn off the computer anti-virus software for the time being.

4. Strictly follow the tutorial prompts to re-operate.