Why does my computer prompt error 100

Sky Software Park's Flash Viewer with Flash plugins.

You can also check out this English version.

My Computer-Properties-Advanced-Error Reporting-Tick Disable won't appear

Just go to the next latest animation plugin.

This is because you have not upgraded to the latest IE plug-in on your computer. Now it's usually flash 9. Maybe you're still using flash8

To give you a way to disable redundant add-ons, in Tools - Manage Add-ons, disable redundant add-ons.

Or resetting IE will do the trick too.

Because there are unregistered dll files in the system All dll files must be registered in order to solve the problem that the memory cannot be read The system DLL file is not registered, which may cause all kinds of unknowable problems, such as the inability to open the secondary link, and often the error "the memory cannot be read or written". How do I re-register all the dll files at once? Click:

Start --Run, enter cmd in the Run box and in the command prompt: for %1 in (%windir% system32 *.)dll) do s %1 Note that it is in the command prompt, not in the "run box"!!

Another reason: you are now waxing socks to pull off the memory with an eraser to wipe the gold finger, and then plug it in to try it, if it is a poor contact, it should be restored to normal, if the memory itself is broken, it is also a problem to get to the merchant. I wish you success.

If you have a memory error, remove the gold finger and replug it about ten times. Blow a bit of dust. Another question is whether you report this error when you often use a certain software, if you just reinstall that software.

Give you two solutions, you try one, clean the memory stick, polish the gold finger Second, redo the system, change win7

Here are some things you can try:

Click Start Menu - > Run, type cmd, press Enter, and enter :

for %1 in (%windir%\system32\*.ocx) do regsvr32 s %1 (copy is sufficient).

Paste, enter.

When you're done scrolling, type in again

for %1 in (%windir%\system32\*.dll) do /s %1

Enter! Until screen scrolling stops, restart your computer!

If you have a problem with your computer's memory, there may be missing components, and you won't have to fix it with 360.

Disable the client that is in trouble.

The hardware reasons are mainly memory module incompatibility and replacement of memory. If it is caused by the system or other software, it can be dealt with in the following ways: (1) If there is a problem with the system itself, install the official patch in time, and reinstall the system if necessary.

2) Virus problem, anti-virus; If the antivirus software conflicts with other software, uninstall the problematic software. (3) Run regedit to enter the registry, under hkey local machine software, microsoft windows currentversion explorer shellexecutehooks, there should be only one normal key, delete the others. (4) Try the command to exclude Start Run Enter cmd-- Enter, enter the following command for %1 in (%windir% system32 *.) in the command prompt

dll) do s %1 If you are afraid of typing the wrong word, you can copy this command, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops.

1. It's all that your software has a problem, it is recommended that you uninstall it, use 360 Security Guard to clean up its residual files and registry and reinstall it.

It's just that there is a problem with the Adobe Acrobat Reader program.,You just delete it and reinstall it.,This is the software used to open PDF documents.。

It's Adobe Reader, which is used to read PDF documents, and it's good for you to start anew, and if you need it, it's bigger, more than 1g, and it looks like it's just a few tens of MB when you read PDF.

The browser is not compatible with the PDF plug-in, or the plug-in that supports the display of PDF files has been closed by the browser. Try reinstalling.

Uninstall the software first, uninstall it, restart it, and reinstall it.

It is estimated that the Adobe Acrobat version is too low, or the compatibility is not good, you try the next latest installation.

Software problems it, uninstall it and reinstall it to try.

After uninstalling this software, reinstall a PDF reader.

Uninstall the pdf and reinstall it.

It is recommended to try it after removing it and reloading it.

Just uninstall and reinstall this software.

This software is not installed properly, uninstall it and reinstall it.

If the installed software prompts an error, reinstall the software. If there is an error in some program in the system, then you have to reinstall the system.

It may be that some application software components have been deleted by mistake, and if it is convenient, it can be solved from installing the system.

It would be nice to redo the system.

1) In most cases, Windows Deferred Write failures occur only because the deferred write files are corrupted during a sudden power failure or forced shutdown, and these files are generally temporary files during the software run. We can try to use the junk cleaning function of some software, which can not only solve most of these problems, but also save system resources.

2) But sometimes, the corrupted file that causes Windows to delay write failure is not only the cache file, which requires us to repair the disk file system. Here's how: First, remember the drive letter of the hard disk partition that made the error.

Open Start-Run, type cmd, press Enter, open a command line window, and enter the chkdsk r c: command (change c: to an error drive letter).

After entering, if you see "Do you plan to check this volume the next time the system restarts?" (y n)", enter y enter. Just restart your computer.

After restarting, the disk self-test process will appear, do not press the button, and wait for the self-test to complete.

3) It is recommended to disable the write cache to eliminate the problem of Windows delaying write failures. Because for the current mainstream computer configuration, this function is no longer meaningful, and it will also cause frequent reads and writes of the hard disk, resulting in fragmentation and reducing the life of the hard disk. The specific method is to open My Computer, right-click on the C drive-Properties, click on the "Hardware" tab-Properties-Policies, and uncheck the check mark before the "Enable write caching on disk" checkbox.

4) Trying to delete the file with the error is also one way to fix Windows delayed write failures, which can temporarily fix the occasional error situation.

However, Windows delayed write failures can also be caused by bad sectors of the hard disk. If this kind of problem occurs frequently on your computer without warning, and it cannot be solved by the above methods, it is recommended to use a hard disk bad sector detection tool (such as HD Tune, MHDD, PQMAGIC, etc.) to detect it. For hard disks with bad sectors, although they can still be used after shielding the bad sectors, pay attention to backing up the data and replace it if necessary.

This is an illegal shutdown or other reason that causes the disk to be damaged, please fix it (fix it for each disk or only fix C).

Built-in disk repair method:

The specific steps are as follows: select the drive letter c in my computer, right-click the right mouse to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair it at boot after automatic shutdown, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Start --- run Enter cmd OK.

Open the command prompt, enter chkdsk f, press enter, if prompted, type y and press enter.

can be fixed. It may prompt a reboot to fix it, you can restart, the self-test interface appears (a lot of English,, the numbers are moving), don't operate, it will automatically enter the system to clean up the system garbage.

Then you can follow the path he prompted to find the file, put it in a different folder, and restart your computer.

1. Use cleaning software to clean up garbage.

2. Use optimization software to optimize startup items and delete unnecessary startup items.

It may be a hard disk problem, it is recommended to reinstall the system before looking at it.

Is there no space for the C drive?

When did it appear? Turn it on.

It's when you shut down, you didn't completely quit the running software, I also tried this situation, you can quit the software before shutting down!

There is a program that is not over yet, or there is a virus.

That's the sound of a memory error, and reinstalling the system can solve it.

A program on your computer is running in the background. It can be poisonous. It's also possible that there are some desktop programs. You're better off using an antivirus software to check it out in safe mode.

Explain that the computer runs more programs, the remaining cache is smaller, and then run the program may be slow, the solution is to clean up the garbage in the computer more, traces, do not use the program as much as possible, if it doesn't work, you can ask someone who understands the hardware to install a memory module to solve.

You see if your programs are all installed in the system disk,It's usually in the C disk,Yes,Move it,If you usually turn on the phone and open a lot of things,And your machine memory is very small,It is recommended that you add a memory,It's not very good,

There are too many things installed inside your system disk (that is, C drive), which causes you to run and prompt you to run out of memory!!

If the memory is too small, you can add another memory module.

Unload something you don't need There are too many things.

Virtual memory can't be set too little.

Close some of the programs you don't use