The natural gas stove is always on the fire, how to deal with it?

The reasons why the gas stove automatically keeps igniting may be:

1. The compression spring of the switch is not elastic, or the elasticity is poor, and it cannot be returned to the original;

2. The high-voltage electronic igniter is broken;

3. The contact of the switch is broken and cannot be opened;

4. The solenoid valve is not opened, and the air source does not flow to the fire hole;

5. The thermocouple and the solenoid valve do not form a circuit circuit;

6. The flame-out protection device is damaged.

1. Replace the new gas stove switch to ensure that the switch is normal;

2. Replace the igniter with a new one;

3. Adjust the position of the thermocouple so that the fire temperature can affect its normal use;

4. Check whether the connecting wire of the solenoid valve is well connected and reconnected;

5. If the flame-out protection device is broken, it can only be replaced with a new one.

Conclusion: If we usually find that there is a problem with the gas stove when using the gas stove, we must stop using it immediately, and then look at the situation of the problem.

1. When ignition, in fact, you need to press down its switch, turn on the switch and you will find that there will be a spring, if the spring is not elastic, or the elasticity has become worse and worse, then the ignition will not be hit, you need to replace a spring, or directly replace a switch, it doesn't take much money.

2. It is also possible that the contact of the switch has been damaged, and once the contact is damaged, the entire switch element needs to be replaced.

3. If it is not the problem of the switch, it may be that the gas valve in your home has not been opened, and the air flow cannot reach the gas stove through the pipe, and you need to check whether the valve is unscrewed.

4. Some gas stoves also have flame-out protection devices, which can play a certain role in safety precautions at critical moments. However, if there is a problem with the flame-out protection device, it will also cause the gas stove to keep igniting.

Generally, the reasons for the constant ignition are:

1.The compression spring of the switch is not elastic, or the elasticity is weak, and it cannot return to the original;

2.The high-voltage electronics are broken;

3.The contacts of the switch are broken;

4.The solenoid valve was not opened, and the air source did not flow to the fire hole;

5.The thermocouple and the solenoid valve do not form a circuit loop;

6.The flame-out protection device is damaged.

Constant Ignition Solution:

1.Replace the gas stove switch with a new one;

2.replacement of the igniter with a new one;

3.Check whether the connecting wire of the solenoid valve is well connected;

4.Adjust the position of the thermocouple so that the fire temperature can affect its normal use;

5.If the flame-out protection device is broken, then replace it with a good one.

For details, please call us or make an appointment for repair.

If it can't be snapped back, clean up the oil and dirt inside the valve body to see if it returns to normal, and replace the valve body if it can't return to normal; If the ignition continues after the valve body is replaced, the igniter is replaced. The correct ignition method is to press the button when the gas cooker with flame-out protection device is ignited, and after the fire appears when the switch is turned on, it cannot be released immediately, at least the switch must be pressed for more than 3 seconds before releasing it. ”

You can replace the gas stove switch with a new one to ensure that the switch is normal; replacement of the igniter with a new one; Adjust the position of the thermocouple so that the fire temperature can affect its normal use.

The weather Zhao always keeps firing, how to recharge why the weather doesn't stop? That's again, by the way, there was a problem with the igniter. Because when you want to ignite the fire, you can't connect and don't want to play when the weather Zhao always keeps firing, how to recharge why the weather doesn't stop playing?

That's by the way, there is a problem with the ignition, because he can't light it when he wants to ignite it, and he doesn't want to light it when he doesn't want to ignite it, so he has to find you in time for this situation.

Pay attention to the use of sky-burning stoves! If you have a problem, you need a professional to deal with it!

There is a problem with the lighter, and there may be a problem with the battery

It's because of the popularity of the bad guy I used to buy a pirated copy in my family, and it's the same situation when I get up early, so I just change it to a very dangerous one.

What's the deal with the gas stove and electric lighter all the time? Possible situation and handling opinions: Section.

First, if there is no gas, if the gas stove does not catch fire, the first thing to check is whether there is still gas, if not, you must add gas. Clause.

Second, whether the battery has electricity, when it is found that it is not on fire, it is necessary to check whether the battery has electricity, if not, you only need to replace the ordinary No. 1 battery. Clause.

3. Poor circuit contact, mainly to check whether the positive and negative poles of the battery box are rusty, whether the line has poor contact, if so, the rust needs to be removed, and the line is accurately connected. Clause.

Fifth, the pipeline is blocked, once the pipeline is blocked, it is necessary to check the gas valve, generally speaking, you can smell the smell of coal and the gas stove is not on fire, it is likely to be a gas blockage, then you need to dredge the pipeline. Clause.

Sixth, the micro switch is damaged, the micro switch is a very small place in the gas stove, but it is more difficult to repair than the usual faults, generally speaking, it is not recommended that the owner repair it himself, this is a fine, professional work, it is best to ask a specialist to solve. Clause.

7. The ignition needle is dirty, the kitchen is easy to be dirty, especially easy to be contaminated with oil, etc., the gas stove is placed for too long, and the ignition needle is easy to be stained by the oil, so you need to clean the ignition needle and then try to ignite. Clause.

8. The ignition needle is not properly positioned, if you want to ignite the fire, the gas stove has certain requirements for the distance between the ignition needle and the fire cover, once the distance deviates too much, it will cause the gas stove to not ignite, generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, and it is necessary to aim at the fire hole. Clause.

9. The gas stove has a high-voltage line and its joint, once the high-voltage line is aging, it is easy to make the gas stove can not catch fire, at this time, only need to add a set of high-voltage protection, which should be observed more in ordinary life. Elimination of common other faults of gas stove 1, the cause of backfire in gas stove 1, fire hole blockage. Due to the different degrees of gas will have some impurities (such as sulfides), there will be dirt precipitation in the fire hole of the fire cover, long-term use will make the fire hole smaller, if the gust of wind or overflow pressure, causing the flame to retreat, and then backfire, in order to avoid this situation, use for a period of time to clean the fire hole.

Reason 2: When the burner is not tightly covered or the air intake at the damper is large, it is also easy to backfire. Therefore, when there is a flashback, the correct procedure is: observe whether the fire hole is blocked; Check that the fire cover is in place; Adjust the damper.

2. The reason for the deignition and deignition of the gas stove is that the gas pressure is too high or the air intake volume is too large, resulting in the flame drifting away from the fire cover and burning. Correct treatment measures: the user should be instructed to correctly adjust the air volume at the damper; If the pressure reducing valve of the user's home is overhauled, if it is natural gas or artificial gas, it is caused by the high pressure in the pipeline, and it needs to be fed back to the gas supply company to solve the problem.

If the ignition needle is dirty, it is best to wipe the head of the ignition needle with a rough cloth.

2. The position of the ignition magnetic needle and the gas outlet is not suitable. If neither of these methods work, it is estimated that you will have to change the magnetic needle.

Gas stoves: Gas stoves refer to kitchen appliances that are heated by direct fire with gaseous fuels such as liquefied petroleum gas (liquid), artificial gas, and natural gas. Gas stoves, also known as stoves, are known to everyone about their popularity, but it is difficult to see a common concept.

According to the gas source, gas stoves are mainly divided into liquefied gas stoves, gas stoves, and natural gas stoves. According to the eye of the stove, it is divided into single foci, double foci and multi-eye foci.

1. The compression spring of the switch is not elastic, or the elasticity is poor, and it cannot be returned to the original;

2. The high-voltage electronic igniter is broken;

3. The contact of the switch is broken and cannot be opened;

4. The solenoid valve is not opened, and the air source does not flow to the fire hole;

5. The thermocouple and the solenoid valve do not form a circuit circuit;

6. The flame-out protection device is damaged.

The solution to this problem:

1. Replace the new gas stove switch to ensure that the switch is normal;

2. Replace the igniter with a new one;

3. Adjust the position of the thermocouple so that the fire temperature can affect its normal use;

4. Check whether the connecting wire of the solenoid valve is well connected and reconnected;

5. If the flame-out protection device is broken, it can only be replaced with a new one.

First of all, check whether the valve body is stuck after pressing down and cannot rebound, if it cannot rebound, clean up the oil and dirt inside the valve body to see if it returns to normal, if it cannot return to normal, replace the valve body; If the ignition is still continuous after replacing the valve body, replace the igniter. Adjust the damper during installation. Adjust the size of the flame and damper so that the flame is blue and the flame is stable.

Replace the new gas stove switch to ensure that the switch is normal, replace the new igniter, adjust the position of the thermocouple, so that the fire temperature can affect its normal use, check whether the connecting wire of the solenoid valve is connected well, reconnect well, extinguish the number of fire protection Bixiang device If it is broken, it can only be replaced with a new one.

1. The compression spring of the switch is not elastic, or the elasticity is poor, and it cannot be returned to the original; 2. The high-voltage electronic igniter is broken; 3. The bright head of the switch is broken and cannot be opened.

4. The solenoid valve is not opened, and the air source does not flow to the fire hole; 5. The thermocouple and the solenoid valve do not form a circuit circuit; 6. Extinguishing fire protection equipment repents and disposes of damage.

The compression spring of the switch is no longer elastic, or the elasticity is poor, and it cannot be returned to the original; The high-voltage electronic igniter is broken; The contact of the switch is broken and cannot be opened; The solenoid valve was not opened, and the air source did not flow to the fire hole; The thermocouple and the solenoid valve do not form a circuit loop; The flame-out protection device is damaged. are all reasons why the gas stove keeps on fire.

1. If the fire has been lit and the knob pressed during ignition has bounced up, it is still igniting, it is a kind of fault, and if the manufacturer can be asked to overhaul it during the warranty period.

2. The electronic lighter of the civil gas stove is a component used to ignite the gas. There are two types: piezoelectric ceramic and electronic pulse. Piezoelectric ceramic igniters have a simple structure, but low ignition reliability, and have tended to be eliminated, but they are still used in low-cost products; The electronic pulse type uses the electric spark energy generated by the discharge of high-voltage electrical pulses generated by the electronic oscillation circuit to ignite gas.

3. The normal ignition process of the electronic pulse type is: press the stove to ignite, adjust the knob, start the ignition, ignition, turn the adjustment knob to the ignition position, and the gas spray is ignited, and continue to ignite for more than ten to dozens of seconds after the ignition adjustment knob is bounced to ensure that the flame cup is ignited, or confirm that the flame is ignited through the detection element and turn to the standby state. If the fire has been lit, and the knob pressed during ignition has been bounced, it is still igniting, it is a kind of failure, and if the manufacturer can be asked to overhaul it during the warranty period.

It is the fault of the switch of the gas stove because the power supply cannot be left after it is turned on and off, so it will always be connected to the electricity, which will cause the gas stove to keep igniting.

If the gas stove has been automatically igniting under uncontrolled conditions, we must first close the gas main gate at this time, and then look at the ignition plug on it when setting.

It means that your stove is good, if the stove is not ignited, it will keep on for about 8 seconds and stop automatically.

If your flame is normal and it keeps ignition, it's a problem with your ignition assembly, and ask a professional to fix it.

The natural gas stove is always igniting, and there are the following ways to deal with it:

1. Replace the new gas stove switch to ensure that the switch is normal;

2. Replace the igniter with a new one;

3. Adjust the position of the thermocouple so that the fire temperature can affect its normal use;

4. Check whether the connecting wire of the solenoid valve is well connected and reconnected;

5. If the flame-out protection device is broken, it can only be replaced with a new one.

This may be a problem with the induction needle (there are two needle-shaped objects, remove the one left with the electric spark), you can adjust the center fire dividing cover, so that the furnace fire is fully burned to this induction needle, if it still doesn't work, it may be that there is a problem with the wiring connected to the induction needle, this should be repaired by professionals!

The general reasons are:

1.The switching spring is not elastic, or the elasticity difference cannot be restored.

2.High-voltage electronic igniter failure.

3.The solenoid valve is not opened, and there is no air outflow.

4.The thermocouple and the solenoid valve do not form a circuit loop;

5.Flame-out protection device is faulty. and other reasons.

For details, please call us or report for repair.

The natural gas stove is always igniting, and there are the following ways to deal with it:

1. Replace the new gas stove switch to ensure that the switch is normal;

2. Replace the igniter with a new one;

3. Adjust the position of the thermocouple so that the fire temperature can affect its normal use;

4. Check whether the connecting wire of the solenoid valve is well connected and reconnected;

5. If the flame-out protection device is broken, it can only be replaced with a new one.

The gas stove has been igniting non-stop treatment method:

1. It may be that the switch pressure spring is stuck or inelastic and cannot be returned to its original state. It is recommended to remove the surrounding oil or replace the switch.

2. If the high-voltage electronic device is damaged, the ignition needs to be replaced.

3. If the switch contact head is damaged or the contact is poor, the connection needs to be checked and the thermocouple position should be adjusted.

4. If the solenoid valve is not opened or the flame-out device is faulty, open the solenoid valve in time and replace the device.

Precautions for the use of gas stoves:

1. Ventilation. Rooms where gas appliances are used must be well ventilated; To prevent gas leakage and other situations from threatening human life, good ventilation conditions can evacuate toxic gases.

2. Regularly check whether there is air leakage.

Regularly check whether the gas pipe of the gas appliance is leaking, the inspection method is to brush the pipe interface with soapy water, if there are bubbles coming out, it proves that there is a gas leak and needs to be repaired.

3. Check the aging of the hose.

The hose should not be used for more than 18 months and its length should not exceed 2 meters.

Fourth, check the rubber ring.

When replacing the LPG cylinder, whether the rubber ring at the interface between the pressure reducing valve and the cylinder falls off, is aging or damaged, and whether the pressure reducing valve is tightened, it is strictly forbidden to use pipe wrenches and other tools to screw it.

Fifth, even if measures are taken if an air leak is found.

When a gas leak is found, immediately turn off the air source, remove the fire, do not start the exhaust fan or hood, open the doors and windows for ventilation and maintenance.