What kind of speaker is working at 35 to 380 Hz?

Updated on number 2024-04-03
8 answers
  1. Anonymous users2024-02-07

    Ovator S-800 loudspeaker: The design of Naim maintains a simple two-tone circuit, but to achieve true full-range sound, the frequency response from 20Hz to 35kHz is all required, and this BMR monomer is indeed the key. Note that the BMR monomer works from 380Hz all the way up to 35kHz, and there is no crossover point in between, we can almost say that the BMR is a full-range monomer, and the low frequency deficiency is made up for by a dual bass monomer.

  2. Anonymous users2024-02-06

    The number of times a substance completes a periodic change in 1 second is called frequency, which is often denoted by f.

    The unit of frequency in physics is hertz (Hz), abbreviated as hertz, and is also commonly used as a unit of kilohertz (khz) or megahertz (MHz) or GHz. 1khz=1000hz,1mhz=1000000hz 1ghz=1000mhz。Frequency f is the reciprocal of period t, i.e., f = 1 t, wave velocity = wavelength * frequency.

    For example, the electricity used in China is a sinusoidal alternating current, and its frequency is 50Hz, which means that it does 50 periodic changes in one second.

    In addition, the sound we hear is also a wave with a certain frequency. The frequency range of human hearing is about 20 20000 Hz, beyond which it is not perceived by our human ears.

  3. Anonymous users2024-02-05

    This sound must be an influence that is universally used internationally.

  4. Anonymous users2024-02-04

    A: This one belongs to the bass category, and it is very large.

  5. Anonymous users2024-02-03

    Summary. Both speakers are subwoofers, one bass, two satellite speakers.

    The above one has a large power of 10W, and the size of the woofer should also be larger.

    The lower limit of the lower frequency is 35Hz, which is better than the one above, as well as the signal-to-noise ratio test, distortion, and resolution. In terms of parameters, the lower part is more standardized than the speaker above! That is, better.

    However, if you can't feel it on the spot, then you can only look at the parameters.

    Speaker frequency response: 30hz-35khz+ and + frequency response 40hz-20khz+ which is good?

    Both of these speakers are subwoofers, one bass, and two satellites are silent. The above one has a large power of 10W, and the size of the woofer should also be larger. The lower limit of the frequency below is 35Hz, which is better than the one above, as well as the signal-to-noise ratio test, distortion, and separation.

    In terms of parameters, the lower part is more standardized than the speaker above! That is to say, it is better but, if you can't feel it on the spot, then you can only look at the parameters.

    Frequency Response: 40hz-25khz and Frequency Response: 40hz-20khz Which is good?

    Wait a minute. 25 better.

    Frequency range (unit: Hz): refers to the range between the lowest effective sound release frequency to the highest effective sound release frequency.

    The ideal reproduction frequency range of the speaker is to evenly reproduce the audible frequency delay range of the human ear, that is, 20Hz 20000Hz. However, in order to reproduce large sound pressure levels, the lower the frequency band, it is necessary to consider the structure that can withstand large amplitudes, reduce distortion, and generally increase the volume of the speaker. So the target should not be set too high, 50Hz 16kHz is enough, of course, 40Hz 20kHz is better.

    Yamaha speaker Frequency response: 30hz-35khz+ and + Huiwei speaker frequency response 38hz-20khz+ Which is good?

    Wait a minute. The frequency response is a range. The lower the lower the limit, the better, preferably no higher than 20Hz; The higher the upper limit, the better, preferably not less than 20kHz.

    This has its own benefits through data.

    Yamaha is better.

    The gap is not big. Ask about custom messages].

  6. Anonymous users2024-02-02

    Dear,Hello,Worm and winter are back,I've helped you find the result:Speaker frequency response 33Hz-20khz and 35Hz-40khz comparison,Speaker frequency response 335Hz-40khz sound is better<>

    Dear, frequency response range refers to the range of sound frequencies that the speaker can produce. A wider frequency response range generally means that the speaker is capable of lower and higher audio frequencies. Theoretically, the frequency response range from 35Hz to 40kHz is wider because it contains lower and higher frequencies.

    This means that it can better represent the bass and treble of the bridge, and can provide a more comprehensive audio experience. Dear, the above is mine, I hope it can help you

  7. Anonymous users2024-02-01

    From the perspective of the frequency response range of the speaker,33Hz-20KHz and 35HZ-40KHz which is better to open and change,You can analyze the following points:1.The audible frequency range of the human ear is generally 20Hz-20KHZ, so the response range of 33Hz-20KHZ is more sufficient, which can cover most of the hearing frequencies of the human ear.

    2.Although the high-frequency response range of 35Hz-40kHz is wider, considering that the human ear can no longer hear frequencies above 20kHz, the extension above 40kHz does not have much practical effect. 3.

    In terms of low frequency, 33Hz can cover most of the bass information in **, while 35Hz will have a slight impact and loss on some bass. 4.In terms of sound quality, 33Hz-20kHz can provide richer and fuller low-frequency response.

    High frequencies are also of little significance beyond the perceptual range of the human ear. 5.Generally, the frequency response of high-quality Hi-Fi speakers is mostly around 30Hz-20kHz, which is enough to provide very excellent sound quality.

    To sum up, compared with the technical indicators, the frequency response of 33Hz-20KHz is more reasonable, which can bring a better sound quality experience, and is more suitable for high-fidelity replayback, which is a better choice in comparison.

  8. Anonymous users2024-01-31

    Summary. Hello.

    How big is the audio frequency of 30-450W.

    Hello. Hello.

    The higher the frequency, the higher the output power.

    Generally there are no 30 to 450 ones.

    The newly bought audio, not charging, a few months, now can't be charged, how can the best way to solve it?

    That is, there may be a problem with the charger.

    The charger was checked and there was no problem.

    This is the original charger not.

    There are about six months.

Related questions
16 answers2024-04-03

Tools Add-ons, in "Plugins" and "Extensions", disable all extensions and plugins, see if the files are resolved, and then enable them in turn, so that you can find out the troublesome extensions or plugins. >>>More

11 answers2024-04-03

Bantian City Management Office - Great Century Garden - Longcheng Senior High School. >>>More

20 answers2024-04-03

If you want to learn makeup at the age of 35, can you still get a job? >>>More

29 answers2024-04-03

WOW medium grade is not very important. The important thing is to have enough knowledge of your profession. >>>More

8 answers2024-04-03

Octave Frequency range (Hz).

We divide the audible sound into three parts according to the octave relationship, and determine the low, mid, and high frequency segments. >>>More