Why is it not allowed to stop halfway when the test is reversed?

Because when reversing into the garage, it must be done in one go, once you stop halfway, it is likely to cause you to park in the wrong way. And reversing into storage is a more technical operation method, once you stop, it means that you have not fully mastered this technology.

Not only reversing into the garage, in fact, on the way to the second exam, in addition to the slope that must be parked at a fixed point and the side parking of the garage, it is not allowed to stop halfway in the other processes, because the driving thing is very widely applied, if you do not comply with the rules not only endanger yourself but also endanger the life safety of others, if you park in the position where you should not park, it will have an impact on the car behind. And for the reverse garage, if you stop halfway, it may not be timely enough to start the steering wheel again, resulting in wheel crimping.

Because when the driving school test reverses into the warehouse, if the parking does not reflect a person's skills, it will make the test meaningless, so the test is required to not stop in the middle of the test, which tests whether a person has a comprehensive grasp of driving skills.

If you have to stop for five minutes to adjust the direction when you are reversing, will you have to reverse like this in reality? This doesn't give you something to do, and the test is supposed to exercise the students' proficiency in driving skills, and not stopping halfway can be regarded as judging the students' judgment and response to the road surface when reversing the warehouse, so it is understandable.

On the one hand, the test is to test the proficiency of the students in driving skills, can not stop halfway is also to judge the students' judgment and response ability to the road surface when reversing the garage, if you park in reality with a few minutes to enter the warehouse, these are too embarrassing. On the other hand, the damage to the booster pump by hitting the steering wheel in place is very serious.

Because when the test is poured into the car, the test point is to test the driver's proficiency and sense of direction in the garage, if you stop halfway, you will be judged to be unskilled in operation, so it will be not recognized by the system, so you must keep the normal driving of the vehicle when reversing into the garage, and you can not stop halfway.

I think the reason why the car is not allowed to stop in the middle of the test is mainly to test the students' control of the car.

And for the sense of direction, there is also a feeling and four corners of the students for the library.

From these aspects, it can be seen that a student has the ability to control the car, as well as the knowledge of basic professions.

The driving school test needs to be completed skillfully in order when the test is reversed. There should be no pause in the middle of each movement. If you pause, you will be deemed to have not mastered the driving skills well enough and have a vague sense of direction, and the system will automatically determine that you are not qualified and you need to take the next retest.

We can park here for a short time, but we have to deduct points. Reversing into the garage is an important skill of daily parking, the requirements must be stricter, for your safe driving in the future, only skilled operation is the greatest responsibility for the students. Besides, if you are allowed to stop halfway, won't many people who are not skilled in operation get away with it?

Do you park while driving?

Reversing into storageStopovers are not allowed, and stopovers will result in a penalty of 5 points.

The explanation of the correct location of reversing into the warehouse is as follows:

The left rearview mirror is seen to coincide with the yellow line at the bottom of the bottom, and the direction is filled to the left, and the left rearview mirror is continued to be observed after filling, and when the body and the yellow line library angle is less than 30 cm, it will return half a circle to the right. If it is larger than 30 cm, it does not need to be returned.

After half a circle, observe the body, and when the body is parallel to the yellow border, immediately return to the steering wheel.

The last point is the bottom edge of the left rearview mirror, blocking the yellow line stop line in front of you, and stop immediately.

Precautions for reversing into storage.

1. Control the speed of the vehicle, not too fast or too slow, and keep it at a normal speed.

2. Adjust the chair mirror, the adjustment of the seat and the rearview mirror is crucial, and the seat needs to be adjusted to the appropriate position if it is not adjusted to cause the deviation of the point, and then adjust the rearview mirror.

3. Adjust the body and keep checking the rearview mirrors on the left and right. If the left side of the body is far away from the control line, the steering wheel will be played to the left, and if the right side of the body is far away from the control line, the steering wheel will be hit to the right, which side is wider.

4. Step on the clutch, the clutch pedal also needs to be learned, to use the forefoot of the foot to step on, can not use the heel, the heel has its place in the place, that is, on the car on the line.

5. Put yourself in the state of ordinary car training, and you can play stably.

It is not allowed to stop in the middle of reversing into the garage.

1. Stop-in mainly refers to the fact that there shall be no pause in the middle when reversing into the parking space or advancing out of the parking space, otherwise it will be judged to be unqualified.

2. When reversing into the warehouse, you will be deducted 5 points if you stop for more than 2 seconds in the middle. Pour into warehouse B from the starting point A to stop, Qin Liang advances to the carriage return area C to stop, reverses from the carriage return area to warehouse B to stop, and returns from library B to warehouse A to complete the test.

3. The reason for stopping halfway is that the clutch is not mastered, the speed is fast and slow, and it suddenly stops instantly. If the flatness of the site is not enough, there are small potholes or slight slopes, and the vehicle is prone to temporary stops. The bevel angle of the front wheel will create a large drag when hitting the direction, allowing the car to stop for a short time.

Reversing into storage

1. Reversing into storage is a project that must be carried out after 2013 to obtain a small car driver's license. Examine the driver's ability to operate the car on site.

2. Reversing into storage is an assessment point in the driver's test. That is, in the exercise, the bridge longitudinal vehicle is correctly reversed into the garage from both sides.

3. The most common type of reversing is "non" type reversing into storage, which is commonly found in various hypermarkets. The second is the "one" shape on the side of the road to reverse into the garage, that is, the side parking that is often said to be wide.

4. The "non-type" reversing storage vehicle should be in a vertical position with the parking space where it is parked, and the B-pillar of its own vehicle, with the first parking space as a reference, can basically be reversed into the third parking space. This method of positioning is more suitable for novice drivers.

In the process of reversing into the warehouse, it is not allowed to stop halfway.

In the subject 2 exam, the judging criteria for reversing into the warehouse include: not following the prescribed route and driving in the order of reed imitation celery, and not qualified; The body is out of the line, unqualified; The warehouse is not entered, and it is unqualified; Stopover, unqualified. It should be noted that if you stop on the way to reversing into the garage, if you exceed 2 seconds, you will be deducted 5 points.

After reversing and entering the garage, if the vehicle stops for more than 2 seconds, 5 points will also be deducted. There are some points that need to be paid attention to in the operation of reversing into storage. First of all, the speed should be stable, and the clutch should be well controlled to ensure that the speed of the vehicle is in a stable state.

Not fast and slow. Secondly, find the right point, there are many points to keep in mind when reversing into the warehouse, such as looking at the point when killing the direction. Again, the direction should be fast, and when the vehicle reaches the corresponding point, it is necessary to quickly hit the steering wheel.

Finally, in the process of reversing into storage, it is necessary to fine-tune to confirm the integrity of the body. In order to successfully complete the operation of reversing into storage, it is necessary to master the skills, maintain a stable speed, find the right point, quickly hit the direction and fine-tune. At the same time, be careful not to stop during the whole process.

Reversing into the warehouse Note:

1. Adjust the rearview mirror.

When reversing into storage, the adjustment of the rearview mirror is essential to ensure that the vehicle is parked correctly. The mirrors should be adjusted to the appropriate position so that you can see obstacles around the vehicle. In particular, Otomo wants to adjust the angle of the rearview mirror so that he can see the ground.

2. Control the speed.

Slow and steady driving is the key to the success of reversing and warehousing. Try to keep the speed of the vehicle as stable as possible, and do not go fast or slow to avoid unnecessary shaking of the vehicle. At the same time, pay attention to the rotation of the steering wheel, not too fast or too violently, so as not to lose control of the vehicle.

3. Pay attention to your surroundings.

When reversing into the garage, always be aware of your surroundings, especially other vehicles and pedestrians. Always be alert and ready to stop at all times to avoid any possible collisions. At the same time, pay attention to traffic signs and markings to make sure your vehicle is parked in the right place.

Reversing into the garage cannot be parked

Additional information

Subject 2: You can't park during the process of reversing into the garage, and you can only park after entering the garage. In addition, it is also necessary to complete the exit within the specified time, and if you stop for more than two seconds during the process of reversing into the warehouse, you will be deducted 5 points.

The reason why during the subject 2 exam, can be judged that the student has incorrect operation, such as not parking according to the regulations, is actually because if the vehicle does not change its displacement within two seconds, the computer will determine that the car is parked halfway. For example, if the wheels of the car do not move more than 10 centimeters within three seconds, it will also be judged as stopping halfway.

In order to avoid deducting points for the second subject reversing into the garage and parking, when carrying out the project of reversing and warehousing, we must control the speed, and master the correct reversing time and reversing angle to ensure that the vehicle can be smoothly reversed into the warehouse, and will not be pressed to the corner of the warehouse or there is a pressure line, if there is one, it is easy to cause the second subject not to pass.

Subject 2: Precautions for reversing and warehousing:

Reserve a seat. The front and rear position of the seat, the height and the height, should be the same every time you get on the bus. Here you might as well sacrifice the comfort of driving, if you are tall, put the seat at the bottom, last, or the highest, the lowest, and if you are short, it is convenient to fix the position.

Sitting. The upper body sits and swings the head, and every time you get on the bus, you have to be consistent. The point is at least 10 centimeters off.

If you want to be accurate, you can't change your sitting posture. If the speed is slow, the deviation will be smaller.

However, it is also necessary to grasp the time, and the reversing of subject 2 needs to be completed within 210 seconds. Under normal circumstances, time is completely sufficient. If the steering wheel is fast, the time and space spikes in the direction of the turn will be shorter, and the error will be small.

Playing the steering wheel slowly and the speed of the car is actually equivalent, that is, the deviation is large. Section 2 is not strict with the steering wheel driving posture, and it is necessary to find a way to hit it in place as soon as possible.

Hit the direction early. When you get to the point, hit early, play a little earlier, so that there is room for adjustment. It is difficult to do a good reversing into the warehouse, the effective way is to play a little early, and when you are close to the corner of the warehouse, you can adjust it again, so that it is safer.

The car drives to the starting position, the distance of the body offline, the body should press the white line in front of the right side of the garage, but do not exceed.