The call sound is too small, many methods have been used, the call sound is still small, how to solv

It may be that there is a problem with the speaker, open the phone shell to see if there is dust or pressure on the speaker or microphone inside, which affects the sound of the call is relatively quiet, take the dust or pressure away, and see if the sound is louder, if it has not been solved, there is a problem with the speaker to be replaced.

First of all, you look at the earpiece speaker to see if there is dirt or dust blockage to clean it, if it still doesn't work, it should be okay to change the original earpiece.

This is the reason for the mobile phone itself, there is no way to solve it, try it again by restoring the factory settings, if it is still the same as before, it is the problem of the mobile phone itself, so buy a mobile phone to buy it in a regular mobile phone store, the quality will be guaranteed, and it is easy to solve the problem.

The low sound of the call may be due to the other party's mobile phone earpiece is broken, or your mobile phone earpiece is broken, you can go to the place where the mobile phone was repaired to find someone to take a look, so as to determine whether the earpiece is gray or the earpiece is broken.

It may be that the receiver of the other party's mobile phone is broken, or your mobile phone receiver is broken, you can go to the place where the mobile phone was repaired and find someone to take a look, so as to determine whether the earpiece is in dust or the earpiece is broken.

Hello, if you have used a lot of methods and have not been able to restore the sound of the call, you can ask for help from professionals to see if the horn is broken, if it is broken, we have no way to fix it.

If there is a corresponding screenshot, it is recommended to upload it together and add a specific description of the situation to give targeted instructions or introductions.

There are several reasons why the phone call is very quiet:

1. The sound of the earpiece is set too small, and in the process of answering the electric Lazheng dialect, connect the volume plus button to turn up the sound of the earpiece. This situation is the most common and can be solved with a good setup.

2. The earpiece is broken, if the earpiece sound has been adjusted to the maximum, it is still inaudible, and everyone is like this, that is, the earpiece is broken, and you need to find after-sales maintenance.

3. The problem of the other party's mobile phone, such as the ** voice of some people, while most people are OK, it means that it is the other party's ** problem.

4. Check whether the film, holster, etc. of the mobile phone cover the earpiece, if so, please remove it and try again.

5. To detect whether the handset of the mobile phone is dusty or clogged with something coarse, you can use a dry soft-bristled brush to clean it. <>

Summary. Hello and thank you for your question. 1. Please adjust the call volume to the maximum.

During a call, press the volume up button to increase the volume of the call.

2. Confirm whether the Bluetooth device is connected.

If the phone is connected to a Bluetooth device, the sound can be broadcast from the Bluetooth device, such as: Bluetooth headset, car Bluetooth, etc., you can go to Settings - Other Networks & Connections, turn off the Bluetooth function and view.

3. Make sure that the sound outlet holes of the earpiece, microphone, and speaker are not blocked or blocked (models that use the screen to produce sound do not need to check the earpiece sound hole).

Please pay attention to observe whether the mobile phone protective case and film cover the sound hole, if the sound hole is blocked, you can try to clean it or bring the mobile phone to the customer service center to clean it.

4. Check whether the mobile phone signal is good.

If the mobile phone signal is not good, it will affect the call quality, so it is recommended that you go to an area with a good signal to take the call test.

How to solve the problem of low call sound.

Hello and thank you for your question. 1. Please adjust the call volume to the maximum during the call, and press the up button to increase the call volume. 2. Confirm whether it is connected to a Bluetooth device if the mobile phone is connected to a Bluetooth device, and the sound can be broadcast from the Bluetooth device, for example:

Bluetooth headset, car Bluetooth, etc., you can go to Settings - Other Networks & Connections, and check after turning off the Bluetooth function. 3. Make sure that the sound outlet hole of the earpiece, microphone, and speaker is not blocked or blocked (the model that uses the screen to produce sound does not need to check the sound hole of the earpiece) Please pay attention to observe whether the sound outlet hole is blocked by the mobile phone protective case and film, if the sound outlet hole is blocked, you can try to clean it up or bring the mobile phone to the customer service center to clean it. 4. Check whether the mobile phone signal is good If the mobile phone signal is not good, it will affect the call quality, it is recommended that you go to an area with a good signal to call for testing.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

1. If the earpiece sound is set too small, you can turn up the earpiece sound by adding the volume. 2. The earpiece is broken and needs to be repaired after sale. 3. The problem with the other party's mobile phone may also be that the location signal of the mobile phone is not good.

4. There is a problem with the hardware of the mobile phone, and it is recommended to repair it after sale. 5. The mobile phone system runs for a long time, and the mobile phone system can be cleaned regularly. 6. Observe whether the protective sleeve or film covers the earpiece; Use a softer finch brush to clean.

7. There are problems of network coverage, incomplete coverage or incompatibility in some areas. 8. If the earpiece of the mobile phone is not aligned with the ear, the mobile phone will make the mobile phone call quiet.

Pro, the solution to the small sound of the call: 1. Internal reasonsThe internal settings of our mobile phones, many of which are default, so the sound is very small, and you only need to turn on the following switches. 1.

Android phones are generally Android phones, and there is an [Accessibility Function] in the settings, find [Hearing] after entering, and then turn on the switch button behind [Mono Audio], and the sound will become louder immediately. 2.The Apple mobile phone also has [Accessibility Function] in the settings of the Apple mobile phone, click [Audio Vision] after entering, and then turn on the [Monophonic Biqi Zaodao Audio], and then turn on [**Noise Reduction], and the call sound will also become louder.

If you listen to songs, even if you turn on the sound very loudly, the volume is still very small, then open the phone's [Settings] - [**] - [Equalizer], and check the [Late Night] mode here, and the sound will become several times louder. Second, the external reason is that the sound of the mobile phone is getting smaller and smaller, and the biggest possibility is that dust and sludge are clogging the earpiece and speaker, and you just need to clean it up. 1.

Earpiece cleaning find a toothbrush that you don't use, brush repeatedly at the earpiece of the mobile phone, brush left and right, brush up and down, brush for as long as possible, you can solve it, and finally dial the mobile phone** and then try whether the earpiece sound has become louder. 2.Horn cleaning first use a toothbrush to clean the horn, then dip a little alcohol on the toothbrush, clean the horn repeatedly, and then prepare a clean cloth to wipe the side bridge here, do not use toothpicks and other hard hands to dismantle objects to poke.

Hope mine can help you <>

There are 7 ways to solve the low sound of the call: check the wheat hole, block the noise-canceling microphone, press the "Volume +" button, clear the user data, wear the headphones, reflash the phone, and return to the factory for repair.

1. Check whether the wheat hole is blocked. Directly remove the back cover of the phone to check, and remove dust when necessary.

2. When making a call, remove the back cover, or block the small opening under the camera (noise-canceling microphone) to see if there is any improvement.

3. When calling, increase the call sound by constantly pressing the "Volume +" button.

4. "Clear user data" on the mobile phone, and uninstall other software if necessary.

5. Use a headset with a microphone for calls.

6. It is also possible that the firmware is defective or affected by third-party software, which causes such problems.

7. When the above methods are not feasible, it can be concluded that the hardware is faulty, and it is recommended to return to the factory directly for maintenance.

The reason for the call drop

1. Poor mobile phone signal. In the process of playing **, when one of the two sides of the communication is in the signal blind zone, the mobile phone will automatically hang up due to no signal.

2. The phone is low on battery. Some mobile phones will not be able to receive electromagnetic waves normally due to insufficient battery, resulting in the interruption of the mobile phone signal.

3. The illegal operation of some mobile phone software leads to the interruption of the signal. Due to the failure of some software to be developed in accordance with relevant national regulations when designing slippage, when such software is running, certain actions are enforced, such as accessing mobile data, etc., which leads to the destruction of the priority of the call, and eventually leads to the interruption of the call. Therefore, for unknown mobile phone software Xin Shen Spine, try not to install, if you really need, you can go to the reputable Android market or other well-known **go ** applications.

4. The interruption of the mobile phone signal due to large electromagnetic interference. When the mobile phone is in a strong magnetic field, at this time, the signal of the mobile phone is greatly disturbed, and the mobile phone signal is interrupted in serious cases. The solution is to try to stay away from the location of the strong magnetic field, and then use the mobile phone to call**.

5. Human factors cause mobile phone calls to be interrupted. During a call, the other party accidentally presses the "stop call" button and the call is aborted.

Summary. All the repair shops in the mobile phone shop say that it is good, and you start to be hands-free when you hit **, and you can increase the volume.

1. Check whether the wheat hole is blocked. Directly remove the back cover of the phone to check, and remove dust when necessary. 2. When making a call, remove the back cover, or block the small opening (noise-canceling microphone) under the camera to see if there is any improvement in the Hongdan book.

3. When calling, keep pressing the "Volume +" button to increase the number of guesses.

It's useless. 4. You can turn on the hands-free.

It's useless, only go to the mobile phone repair shop to check if your microphone amplification is broken.

Maintenance? But a few hours to go is a good choice, a bad choice.

You'll only have to check the volume.

All the repair shops in the mobile phone shop say that it is good, and you start to be hands-free when you hit **, and you can increase the volume.

Oh well. <>