Android mobile phone is connected to the wireless message modem, how to connect the mobile phone to

It's easy to buy a wireless router.

Buy a TP wireless router again, it is not expensive about 100, and it is automatically networked and trouble-free.

The phone shows that the wireless signal is very poor, there is almost no signal, you can set to use the 3G network signal to surf the Internet, no need to open wife.

Which is because your optical modem has not opened the wireless function,We have the so-called engineer of the telecom here,Only opened a wired port for me when installing,Later, I checked the Internet myself,First of all, I must find the brand of my optical modem,According to the method of the network, obtain the superuser password of the optical modem,Go in and open the function yourself,The password of the ordinary account is not good。

1. Crack the wireless cat and realize wifi Internet access.

The wireless cat is customized by telecommunications, and the wireless routing function is limited, and the wireless routing function can only be realized after cracking, so that mobile phones, laptops, and pads can access the Internet wirelessly. At the same time, the desktop computer has wired Internet access (no dial-up, direct Internet access).

There are many cracking tutorials on the Internet, and the cracking of wireless cats is different for each model. You search for the model of your wireless modem, find the tutorial, and check the settings.

Second, it can also be connected to a wireless router to achieve wifi Internet access.

You can also buy a wireless router and follow the following method to set up wireless Internet access:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

I can only tell you that if you only have cats, you can't use wireless... If you want to use wireless, you need to buy a router...

I just know the reason, but I haven't used the optical modem here, so I can't tell you how to set it up for the time being.

You can understand it this way, if you are using a wireless router, but DHCP is turned off, the mobile phone is not assigned an IP after connecting to WiFi, and it cannot be connected to the Internet, so you need to manually set the IP.

In the same way, the optical modem of China Telecom is not a router, and after the mobile phone is connected to WiFi, it is only equivalent to the line of the wired network, and PPPOE dial-up is also required to assign the IP of the WAN provided by China Telecom, and then it can access the Internet. Therefore, at this time, you also need to set up PPPOE dialing on the mobile phone to use it, but not all mobile phones support this function.

It is recommended that you buy a wireless router to connect to the optical modem, use the router PPPOE dial-up to access the Internet, and computers, mobile phones, tablets and other devices can access the Internet through the WiFi of the wireless router.

1.After the telecom optical modem is installed, connect the network cable port to one of the network ports of the optical modem (for example, network port 1).

2.Connect the other end of the network cable to the network port of the computer, check the network connection status, and ensure that the network is successfully connected.

3.Use the default address to enter the Fibre modem settings page, which is generally the default address, and the user name and password can be found behind the device.

Set up wireless basic information:

After logging in, click on the "Network" column, and by default on the left side, check "Enable Wireless", "Wireless QoS", and "Wireless Multicast" before the basic WLAN configuration.

Set a wireless network password:

In the navigation pane on the left, select WLAN Security Configuration and configure the following parameters:

Encrypt method: Mixed WPA2 WPA-PSK Click Save application.

After the setting is successful, you can connect with the network cable and connect to the Internet through the wireless network.

Hello, because after connecting, you also need to dial up on your phone to be able to surf the internet.

If your computer can access the Internet, you can directly use the router as a switch? You have to set up the router, you have to follow the instructions when you buy it, and you can use your mobile phone to surf the Internet directly after the configuration is very simple!

The configuration is easy to see in the manual

What brand of wireless optical cat?

It seems that this one does not have a wifi function, if it is saved, it must be possible, you open the settings of the phone, click on the invalid "wireless and network" to see if there is a WLAN option, there is OK.

Since you can find the wireless network with your mobile phone, you can connect it directly.,The password goes to set up the cat when you lose it yourself.。。。 You don't have to put that stuff ...

Search for Wi-Fi directly with your phone, and then enter the key on your Wi-Fi modem.

1. Enter in the column of **: Enter the telecom wireless cat setting interface, use the account password, user name: telecomadmin, password: ne7ja%5m (note: the password is more complicated, it is recommended to copy and paste it) to enter the back interface.

2. Open Network - Broadband Settings.

3. Find the local VPI VCI connection in the connection name.

4. After selecting the local VPI VCI connection, click to delete the connection, (note that the local VPI VCI connection cannot be dialed by computer after the connection, and deleting this connection is to lay the foundation for setting the route below).

5. After deleting the connection, a new connection is established.

Carrying services on the Internet (enabled).

Mode route (PPPoE).

Use NAT to enter your account and password for surfing the Internet.

Determine the management --- device management --- device reboot (routing setup complete.) The following steps start configuring the DHCP service, which allows you to limit the IP address to control the number of computers connected to the Internet.

The wireless cat is not a wireless router, and it also needs pppoe dialing to connect to it, and the computer needs to dial when it is connected, and the same goes for mobile phones.

There's a password behind the cat, but it seems that you can't use wifi without a router, and you can't use it even if it's connected, and that's what mine is.

Does the wireless cat require a password? Let's enter an 8-digit password in the cat!! Or call 10000 to consult related business and **!!

I use Shanghai Bell's wireless cat, and I have to go inside to set it up, otherwise the phone can be searched but not connected.

Who said that a phone must have no less than 8 digits? Our organization's five-digit password is still fine.