How long does it take for a custom wardrobe to move in?

It is best to ventilate for 2-3 monthsWhen ventilating, all the wardrobe doors should be opened, so that formaldehyde and other harmful gases are slowly released, so that when using the wardrobe, formaldehyde will not be adsorbed on the clothes and affect the health of the family.

In winter or air humidity.

In the case of high, it will take a little longer, about 180 days before moving in. If you have pregnant women or children at home, it is best to wait for 180 days before preparing to stay.

Precautions for the use of custom wardrobes.

When using the wardrobe, when pushing and pulling the cabinet doors and drawers, the pushing and pulling action should be gentle to prevent violent slamming and impact. Pay special attention to the direction of the rotation and stretching of the handle, and avoid using dead force. Pay special attention to children and do not dangle from the doorknob, which is prone to danger and may cause damage to the door.

Many monolithic wardrobes are the same height as the wall, leaving no space at the top. But there are also some that leave a certain space at the top of the wardrobe and the top of the room, and many people are used to piling up some items that are not commonly used into this space, which is actually very bad for the wardrobe, especially when the stacked objects are heavier. Therefore, do not press heavy objects on the overall wardrobe, so as not to protrude the cabinet door, the cabinet door is not closed tightly, and at the same time cause the plate.

Deformation. The above content refers to Encyclopedia - Custom Wardrobe.

3-15 years. The newly made wardrobe can be moved in for 3-15 years, and the board used in the new cabinet contains a large amount of formaldehyde, which is released for up to 3 15 years, so we can find some ways to treat formaldehyde. For the new wardrobe to remove aldehyde, the convenient and cost-effective way is to place some activated carbon packets in the cabinet to absorb the formaldehyde constantly emitted by the cabinet, and at the same time, it will have a good removal effect on the odor in the cabinet.

With the vigorous development of the national economy and the rapid improvement of the national economy, everyone has the ability to buy a new house, and after buying a new house, you can decorate the new house exquisitely, first of all, you can use some decoration plates to make some cabinets, but the plates used in the new cabinets contain a large amount of formaldehyde, and the release time of these formaldehyde is as long as 3 15 years, so we can find some ways to treat formaldehyde.

For the new wardrobe to remove aldehyde, the convenient and cost-effective way is to place some activated carbon packets in the cabinet to absorb the formaldehyde constantly emitted by the cabinet, and at the same time, it will have a good removal effect on the odor in the cabinet.

The adsorption principle of activated carbon.

Activated carbon adsorption mainly uses the well-developed void structure inside the activated carbon to fully contact with the harmful substances in the air, so as to achieve the effect of absorbing various harmful substances in the air. At the same time, there are many pores on the surface and inside of the activated carbon that are connected to each other, and the whole formed by interconnection will have a good adsorption effect.

How to choose activated charcoal.

People's evaluation of activated carbon bags is different, because there are a large number of unscrupulous merchants in the market to make inferior carbon bags, some of these inferior carbon bags not only have no adsorption function, but also release other harmful substances to the cabinet, it is recommended that you choose high-quality carbon bags when choosing carbon bags, and high-quality carbon bags are characterized by loose structure of fine particles or powder, will not come with any taste. In addition, when purchasing, choose activated carbon with good density, and pay attention to check the shelf life of the carbon bag and whether the quality inspection is qualified.

In addition to placing a large amount of high-quality activated carbon in the cabinet to adsorb the formaldehyde continuously released by the cabinet material, we can also solve the formaldehyde problem in the cabinet from the root. For example, looking for a professional aldehyde removal company to carry out formaldehyde treatment on the cabinet, some methods used by professional aldehyde removal companies can quickly and effectively solve the formaldehyde problem.

Professional aldehyde removal method.

Source catalytic decomposition method: The source catalytic decomposition method is to spray catalyst on the surface of the cabinet to catalyze the release of the bound formaldehyde on the surface and deep layer of the object into the air, and then use the decomposition agent to decompose the free state in the air, and finally use nano wax for sealing treatment, so as to minimize the total indoor formaldehyde content. At present, the source catalytic decomposition method is the best method to remove aldehyde, as long as the furniture is not added after the treatment, the formaldehyde concentration can be realized below the safe value, and everyone's health and safety are guaranteed.

It is best to ventilate for 2-4 months before moving in, because the furniture paint and processed adhesives have formaldehyde, benzene and radioactive substances, which cannot disappear immediately, and it takes a long time to slowly fade, but according to the actual situation, it is basically 2-4 months to move in, and the problem is not big.

To alleviate the harm caused by harmful substances in new furniture, it can be alleviated in some ways: (1) The most direct, simple and affordable way is to open windows and ventilate the general community around the clock, and the community will also plant Yueji, roses, osmanthus, which are good ways to remove harmful substances in addition to nature, so be sure to open more windows for ventilation (2): Put high-quality and inexpensive plants that can absorb formaldehyde and other decoration odors at home, and at the same time, you can also put in some vegetables and fruits that remove harmful substances, such as:

Pineapple, orange, celery, etc. (3): There are air purifiers and formaldehyde removers on the market now, which cost some money (5): At the same time, you can ask professionals to remove formaldehyde, which is very expensive.

New furniture should choose environmentally friendly materials and furniture manufacturers with trustworthy quality, so as to minimize the potential safety hazards caused by harmful substances in new furniture.

Custom wardrobes can not be moved in immediately, generally speaking, custom wardrobes can be moved in and used after one or two months of placement. But it is also divided into different situations, such as the elderly and children at home, so try to put it for a longer time. Let the formaldehyde be released as much as possible.

As long as it is more environmentally friendly, ventilation can be occupied, I look for this Shumei to do.

I like their light luxury and simple style, and I lived in it for more than a month.

The specific time to stay depends on the specific situation of your home.

When I did it, it was said that it did not contain formaldehyde, and we put it for half a year, opened the window for ventilation, put tea leaves, and there would still be a taste when we lived in.

Of course, formaldehyde has no taste, just the smell of other emissions.

So you can test it with things, and you can move in when it's suitable.

This depends on the material you choose rings are not environmentally friendly.

The complexity of the process can affect the time it takes to customize your wardrobe. Crafting it all by hand makes the furniture more durable, so it takes at least 60 days to customize the wardrobe using a more complex process.

If there are not many requirements for craftsmanship, it is generally possible to complete the customization of a wardrobe in 40 days. If you are in a hurry to use a wardrobe, you can reduce the process, don't ask too much. Some consumers have added requirements such as engraving patterns, so it is normal to increase the customization time of more than ten days.

Custom-made wardrobes made of solid wood take the longest time, mainly because of the many manual processes required. The least time-consuming part of a custom-made wardrobe is the panel, which can be produced in large quantities using a fully automated machine, as long as you pay attention to the edges.

Maintenance:

1. The main body of the wardrobe is the board, if you do not pay attention to the moisture-proof, the plate is wet, and it is easy to expand and deform, resulting in damage to the wardrobe and cannot be used.

In the rainy season in spring, be sure to keep the room ventilated and breathable, often wipe the wardrobe with a dry touch cloth, you can place some desiccant inside the wardrobe, it is necessary to remind that the desiccant used should not have other peculiar smells, to prevent the volatile smell from causing damage to the clothes inside the wardrobe.

2. Regularly inspect the three-in-one connector of the wardrobe back panel and the laminate, especially when the external force is seriously collided, tighten it in time if it is found to be loose, and inject a small amount of lubricating oil to prevent it from being corroded by rust.

The average cycle of the whole process of custom wardrobe industry is about 30 days.

We can only count from the time when the order is placed. Only when the custom wardrobe brand merchant places the order back to the factory, the factory will arrange the order to enter the production process. Because it is different from the finished furniture, it has a uniform size or style, color, and style.

Everyone's custom furniture is different, so it needs to be re-cut for production, and each link will take up a certain amount of time. Although the current custom furniture brands are all assembly line production. However, the production of customized furniture products of different sizes requires constant adjustment of the parameters of the equipment, so the time is relatively high.

About half a month, if it's fast, that's a week.

The complexity of the process will have a direct impact on the time it takes to customize your wardrobe. Among them, the traditional mortise and tenon production process occupies more time in the whole process of customizing furniture, and all this part of the processing is made by hand, so that it can be more suitable and make the furniture more durable, so it takes at least 60 days to customize the wardrobe with a more complex process. Generally, it takes 40 days to complete a high-quality product for Dada.

The business processes involved in custom furniture are as follows: measuring tape, design plan, customer participation in discussing the plan, confirming the plan, signing the custom contract, placing an order for production, delivery, and installation. The first five processes need to start from the beginning of the renovation (especially if there are custom cabinets, the renovation should start at the beginning of the renovation), and the length of time is related to the customer's renovation progress and the efficiency of the customer's participation.

The production process of the program will determine different production and delivery cycles according to the different products customized by customers, which can be roughly divided into: 15-25 days for modern style and 30-45 days for European style. The delivery and installation period is generally 3 days.

Hello dear, Generally, ventilation for about a month can be occupied, because the new cabinet and the newly renovated house have the same harmful gases, but the new furniture has less harmful gas content, and the materials used are relatively less, so there are fewer harmful gases. How to remove formaldehyde and other harmful gases 1. Open windows for ventilation: Newly renovated houses, so the windows should be opened to make air circulation and reduce harmful substances in indoor air.

For the owners of Ye's shirts who decorate their houses in winter, they should also pay special attention not to close the doors and windows because of the cold, if the air is not circulated, the indoor formaldehyde content is too high, and the radon concentration also increases. 2. Activated carbon adsorption method: Activated carbon adsorption method is the most effective for removing formaldehyde, mainly because the hollow structure of activated carbon determines the strong adsorption capacity; Moreover, the cost is low, the effect is good, and the use time is relatively long-lasting, so activated carbon is the best way to eliminate formaldehyde.

Hope my answer is helpful to you, <>

Kiss, <>

We're glad to answer your questions! Custom furniture New furniture can be moved in after one or two months of placement Custom wardrobe can be used after one or two months of old skillful placement, but it is also divided into different situations, such as the elderly and children at home, then try to put it for a little longer, so that formaldehyde is released as much as possible, if it is winter, the new furniture is also to be put for a little longer than summer, the air is clear and dry in winter, and it is not easy to volatilize formaldehyde. At the same time, it also depends on the size of the house and the ventilation of the house, if the house is small and the ventilation facilities are better, then it can be used in a month, of course, if the new furniture is pure natural pure solid wood furniture, there is no problem to move in half a month, if the weather is good, our furniture smell will volatilize faster, and it can shorten the placement time.

Hope mine can help you! <>

Summary. Hello, the shelf life of the custom wardrobe is three years, generally speaking, the main materials of the custom wardrobe are solid wood and boards. The solid wood wardrobe is made of all solid wood, and the ** per square meter is more than four or five hundred yuan, and some even cost thousands.

The selection of solid wood wardrobes is expensive, and the environmental performance is also relatively good, but there are still a few solid wood custom wardrobes, because the production process of solid wood wardrobes is not very mature, and the water content of solid wood materials is high, and it is inevitable that there will be cracking and other phenomena after a few years <>of use

What is the shelf life of a custom wardrobe.

Hello, the shelf life of the custom wardrobe is three years, generally speaking, the main materials of the custom clothes consumption cabinet are mainly solid wood and boards. The solid wood wardrobe is made of all solid wood, and the ** per square meter is more than 100 yuan in four or five, and some even cost thousands. The selection of solid wood wardrobes is expensive, and the environmental performance is also relatively good, but there are still a few solid wood custom clothes cabinets, because the production process of solid wood wardrobes is not very mature, and the moisture content of solid wood materials is high, and it is inevitable that there will be cracking and other phenomena after a few years <>of use

Expand knowledge: wardrobe is a cabinet for storing clothes, usually made of stainless steel, solid wood (wood incense board, solid wood particle board, MDF), tempered glass, hardware accessories as materials, generally to cabinets, door panels, silent wheels, door curtains as components, built-in clothes rails, trouser racks, baskets, disinfection lamps and other accessories, using punching, assembly, riveting, welding and other processes, with flame retardant, rat-proof, seamless cockroach-proof, dust-proof, moth-proof, moisture-proof, clean and beautiful, easy to move, etc., there are large-capacity intelligent disinfection wardrobes, Non-power glass cabinet, stainless steel wardrobe, ultraviolet disinfection and cleaning wardrobe, moisture-proof multi-functional wardrobe, men's and women's locker, dry cockroach-proof wardrobe, folding wardrobe Qiaohe, simple wardrobe. The common ones are divided into swing doors, sliding doors inside and outside the cabinet, etc., and the plates used in the wardrobe are generally stainless steel, metal, wood, etc., which is one <>of the furniture filial piety pies commonly used in the family