Midea refrigerator because the circuit is on the top of the top because the height is not low, fold

Updated on Car 2024-04-29
30 answers
  1. Anonymous users2024-02-08

    It is best not to disassemble it, because the refrigerator has undergone safety inspection before leaving the factory, and if you try to disassemble it, it may affect the safe use.

  2. Anonymous users2024-02-07

    If this is the case, it is possible to take it apart, but try to be careful.

  3. Anonymous users2024-02-06

    I advise you not to move the circuit yourself. If there is a problem, call Midea's customer service ** to find a professional to change, if it is not a non-professional, there will be a certain danger I think.

  4. Anonymous users2024-02-05

    If you take it apart because of the height, of course you can, but the wiring must be connected correctly.

  5. Anonymous users2024-02-04

    If it is a professional maintenance personnel, then it is also feasible to move the circuit of the Bamei refrigerator from the top to the back. As long as the circuit can operate normally.

  6. Anonymous users2024-02-03

    If you don't put it high, it's okay to put it in the back.

  7. Anonymous users2024-02-02

    Whether the compressor starts and stops normally, if it is normal, it is mostly the temperature adjusted by the thermostat, the temperature should be appropriately lowered, and the digital gear should be increased by the mechanical thermostat. If the compressor does not stop working for a long time, but the refrigeration effect of the refrigerator is not good, it is mostly caused by slight damage and leakage of the system pipeline, which will become more and more serious until the freezer is no longer refrigerated.

    In addition, some refrigerator refrigeration systems have solenoid valves to control the circulation of refrigerant liquid, if the control circuit or solenoid valve is abnormal, this phenomenon will also occur, and should be contacted in time with the after-sales service for maintenance.

  8. Anonymous users2024-02-01

    General household appliances cannot be dismantled casually when they leave the factory, unless they are professional.

  9. Anonymous users2024-01-31

    This ice is a brain-dead design of the United States, and the wires are not placed in the machine but outside the machine, and the height is super high.

  10. Anonymous users2024-01-30

    If something goes wrong, it's best to get a professional to fix it.

  11. Anonymous users2024-01-29

    Midea refrigerator because the circuit is on the top and the height is not low, it is not possible to disassemble it and open it in the back. Because the refrigerator has to be laid flat. If it is put down, it will affect its use.

  12. Anonymous users2024-01-28

    This refrigerator because the circuit is on the top, because the height is not low, fold it and put it in the back, thinking that in this case, of course, it is still not possible, after all, there is still a certain risk in this way, it should not be.

  13. Anonymous users2024-01-27

    There is no anti-leakage protector for refrigerator leakage.

  14. Anonymous users2024-01-26

    Sound: 1. A person shouts at a wall 1230 meters away from him, and after how many hours can he hear his own echo.

    Light: 1. What is the mode of propagation? 2. Propagation speed (integer) 3. What is the propagation path?

    Lens: 1. The focus of the lens.

    Change of state of matter: 1. What is the difference between melting and melting? 2. Sublimation process (no liquid) circuit:

    1. The parallel series circuit can draw the control diagram of the corridor circuit for the students to analyze, ask whether it is parallel or series, draw a few circuit diagrams for the students to judge, and let the students say the difference between series and parallel, question: 1. Is the neon sign connected in series or in parallel? If one of its bulbs breaks, will it continue to glow?

    2. Who needs to use double-throw switch for series circuit and parallel circuit? Why?

  15. Anonymous users2024-01-25

    Oh, it's a world of interests

  16. Anonymous users2024-01-24

    Depend on... It's really up to the problem. Just buy a few copies of the Olympiad. There is also the need to do more, practice more, and think more. Then physics will be great.

  17. Anonymous users2024-01-23

    Physics is a difficult subject. Things online aren't very good.

    It is recommended that you go and buy a few books. Concentrate on your research at home.

    In order to learn this subject well!

  18. Anonymous users2024-01-22

    Go to the People's Education Publishing House** to take a look, there are questions for each subject, there are also review materials, and there are physics games.

  19. Anonymous users2024-01-21

    I am now in the third year of junior high school, and I am going to take the high school entrance examination, I am more aware of the requirements of the syllabus, try not to buy too many questions to do, to be based on the textbook, to read the textbook well, every picture, each test to see clearly, important concepts to memorize clearly, so that you can always be invincible, in addition to being careful.

  20. Anonymous users2024-01-20

    It should be that freon is not enough.

  21. Anonymous users2024-01-19

    Give the manufacturer a good repair.

  22. Anonymous users2024-01-18

    Stagnation means stagnation, and emptiness means air!

    To stay in the air means to be stuck in the air!

    The main thing is to rely on the strength of the waist and abdomen to control the body to stay in the air!

    You can also block the opponent's shot and prevent the opponent from scoring!

    The stronger the waist and abdomen strength, the longer the time you stay in the air, of course, the higher you jump, the longer you will stay in the air! But not necessarily the higher you jump, the stronger your ability to stay in the air!

  23. Anonymous users2024-01-17

    Waist attached strength.

    Very own physical fitness.

  24. Anonymous users2024-01-16

    Refers to the length of time spent in the air, the longer the time in the air, the better you can control the ball.

    It is mainly related to your waist and abdomen, do some bouncing and waist and abdominal exercises.

  25. Anonymous users2024-01-15

    If the waist and abdominal muscles are developed, it is good to add bounce, then it will definitely be good to stay in the air.

  26. Anonymous users2024-01-14

    Is the time to stay in the air! It has to do with your waist and abdomen strength and bounce!

  27. Anonymous users2024-01-13

    The ability to stay in the air refers to the time spent in the air Compare NB is Carter A long stay in the air means that you can do more actions The quality of people is not the same The quality of people is different from that of people Some people jump very high, but the air is not necessarily very strong People who are strong in the air must not be weak in their bounce.

  28. Anonymous users2024-01-12

    The ability to stay in the air refers to the time spent in the air, which is related to how you master the control of your movements in the air. Therefore, people with average bouncing can also have a better ability to stay in the air. It mainly depends on how you make the most of your time in the air.

  29. Anonymous users2024-01-11

    This refers to the individual differences in the time that basketball stays in the air, the main reason is the ability to bounce, of course, and the weight and body shape have a certain relationship, light weight people can better get rid of the earth's gravity.

  30. Anonymous users2024-01-10

    Individual physical fitness is different, the increase in height is also different, according to the following method of training can generally increase more than 10 cm:

    1. Half-squat jumping.

    At the beginning, half-squat to the position of 1 4, with your hands in front;

    Jump upwards at least 20cm to 25cm off the ground. (If you find it easy, you can jump to 25cm-30cm). When in the air, keep your hands behind your back. When you land, finish it once. Next, just repeat the steps above.

    2. Raise your toes (calf raises).

    First, find a step or a book to put on your feet, and then put only your toes on it, and your heels must not touch the ground or pad;

    Raise your toes to the highest point;

    Slowly lower it again and finish it again.

    3. Steps. Find a chair and put one foot on it at 90 degrees;

    Jump away as best you can, switch feet in the air, and put them on the chair;

    Repeat the previous step and return the original jump foot to the chair to complete the other jump.

    4. Vertical jump. Keep your feet shoulder-width apart and "lock" your knees;

    Jump with only your calves. Bend the pavenilla, try not to bend the knees;

    When you reach the ground, you can quickly jump again and complete it once, this is difficult, you can use your hands to help you jump.

    5. Squat and jump (practice once a week).

    Stand with a basketball in front of your chest;

    Squat down (half-squat), look ahead, keep your back straight, lift your toes, and keep your thighs at 90 degrees;

    Jump up to 8cm-13cm, be sure to maintain the posture of the second step;

    Hit the ground and get it done.

    If you want to jump 15 times, you need to jump 8 cm to 13 cm from 1 to 14, and you need to jump high with all your strength on the 15th time.

Related questions
17 answers2024-04-29

Haier refrigerator of artificial intelligence generally defaults to intelligent temperature adjustment,You don't need to set it yourself,If the artificial intelligence is not turned on,In a non-locked state,You can press the artificial intelligence key on the refrigerator panel,The icon e,The refrigerator enters the artificial intelligence state,Press the smart key again,The icon e disappears,The intelligent adjustment state exits。 >>>More

4 answers2024-04-29

The working principle of the refrigerator: the mechanical energy is provided by the electric motor, and the work of the cooling system is carried out by the compressor. >>>More

10 answers2024-04-29

It is a wavy or circuitous line, and the snake line has two uses, 1, that is, to increase the length of the line in a limited straight-line distance, which is commonly used in the motherboard and graphics card settings, such as the connection line of the video memory requires each to be the same length, and the short distance is only a snake. 2. The snake line itself can be used as an inductor to increase the current stability.

4 answers2024-04-29

Every upgrade and innovation of Midea's star service is at the forefront of the industry. We believe that service is also marketing, and only through the continuous introduction of new service measures that can meet the potential needs of users can we widen the distance from competitors, form differentiated services, enhance the service image of the United States, and finally create user touches and achieve zero distance with users. Dear customers, thank you very much for using Midea series products, we will provide you with the most thoughtful and best quality service, if the product you use is faulty or have any questions, please call Midea (air conditioner washing machine, refrigerator) Yuyao after-sales service center: >>>More

17 answers2024-04-29

Take the regular refrigerator 1 7 gear as an example:

The temperature of the first gear is controlled at about 9 10, which is also the highest temperature in the refrigerator, and it is usually necessary to set this gear when the indoor temperature exceeds 32 degrees in the summer. >>>More