How do I connect my computer to TV? Can anyone give a solution?! Thank you!

An integrated graphics card requires an adapter to connect to the TV.

Steps to connect your computer to your TV:

1、 The interface required on TV:VGA port and audio port,Among them, VGA port is used to transmit computer images,Audio port is used to transmit computer sound。 The trapezoidal blue interface in the blue box in the figure below is the VGA port, which is generally written with the words PC or computer.

The headphone jack in the yellow box on the left side of the VGA port in the figure below is used to connect to the computer sound, and the interface will generally have the words "PC input" or "computer input". The audio interface of some TVs is in the shape of a lotus head,This kind of audio connector is very common on TV,Just like the top of the connector in the figure below is a red circle and a white circle,Generally, red is the right channel,White is the left channel。

2. For the connecting cable, you need to prepare the VGA cable and audio cable, as shown in the following figure

3、 Prepare the cable,You can start the connection,The connection is very simple,As shown in the following figure,Use the VGA cable to connect the VGA output of the computer and the VGA output of the TV,And use the audio cable to connect the computer sound card output to the audio input of the TV。

The specific audio cable connector is determined according to your TV,It may be shown in the picture on the upper right,One end is the headphone plug and the other end is the lotus plug,Or it may be as shown in the figure below,Both ends are headphone plugs。

4. Software settings on the computerBefore setting up the computer software, turn on the TV and switch to PC input. Then turn on your computer. For the case that the computer has only one VGA connector,The TV becomes the original display,The operation method is exactly the same as the original,No software settings are required,So we mainly introduce the software settings when the computer has dual interfaces。

In this case, the computer has two displays, one is a TV, the other is the original monitor, the picture of the TV and the monitor can be the same or different, the difference in the picture is done by screen expansion, and the same picture is done by screen copying. Below we describe the settings for screen expansion and screen duplication, respectively.

6. After the computer starts, on the Windows desktop, right-click, select Properties, and see the connected monitor in the "Settings" page of the "Display Properties" that opens, but it has no output (low light) before it is configured.

Use the mouse to select the monitor you want to configure (as shown below), and click "Extend Windows desktop to this monitor", you can extend part of the Windows desktop to the TV.

There is only one interface available behind the host,Used to plug in the RGB interface of the TV,Then select RGB on the TV signal source

You'll have to convert the TV signal input mode to your input channel!

Upstairs is right.

The landlord bought the signal cable, looked at the computer and TV interface and connector, and knew how to pair, and then added.

Ordinary TVs are analogue inputs.

Whereas, computers are digital signals.

So it depends on whether the landlord's TV is suitable.