How to use the shutter release cable and what does the shutter release do? What are the specific ben

The shutter release cable is a remote control cable that controls the shutter, which is often used for long-distance control photography, **, continuous shooting, which can control the camera to take pictures and prevent the vibration caused by contact with the camera surface and prevent the integrity of the picture from being damaged. The product is widely used and is used by almost all photography enthusiasts.

The electronic shutter release cable has the function of "two-way button".

The camera will focus and metering when pressed half-time, and the camera will open the shutter to take pictures when pressed full.

The electronic shutter release cable is equipped with the function of "locking the bulb".

Push and pull the bulb button up, the camera will achieve focus and long-term ** when the bulb button is locked, and when the bulb button is reset, the shutter will close, ** ends.

Shutter release (release), also known as fast line. It is an accessory for controlling the shutter switch action, and is used to control photography, exposure, and continuous shooting from a distance. In the early days, there was a pneumatic shutter release, which generated pressure through a backlog of balloons to push the remote shutter to achieve the purpose of taking pictures.

This method is simple and low-cost, but it is unstable and unreliable. Later, there was a steel cable shutter line, which is also available on the market, and the spiral hole on the shutter line of the fuselage is closely combined, and the reliability is further improved. With the advent of digital cameras and gradually replacing the position of traditional cameras, the function of the shutter release line has also increased.

Now the electronic shutter release line is developed. For example, the B mode lock function is included to achieve long-term light exposure; Interval photography, continuous shooting, timed photography, etc.

This effect does not require a b-door, a tripod is a must. The shutter release cable is attached to a shutter release jack on the side of the camera. The shutter mode switches to select the shutter release line, and other options include timing, continuous shooting, and so on.

**Mode selection to aperture priority,**Time set to 3 5 seconds, depending on the speed of the car, the speed of the car can be less, the slow is longer.

You first adjust the aperture priority mode of the camera, then set the delay time, ** time, interval time, and the number of shots, and then press the button to start taking pictures.

Plug in the shutter release cable on the upper port and you're ready to go. The shutter release cable is generally used to prevent the machine from shaking when the shutter is pressed, and it can also be used to lock the bulb as a bulb. There is also an electronic timer shutter release cable that can be set to shoot at intervals.

It can control the shutter at a certain distance and is not affected by the camera action and does not affect the camera, such as telephoto shooting evening scenes, often for several seconds, using the shutter release to prevent shaking caused by pressing the shutter, or when scanning on the panoramic gimbal, using the b-bulb shutter release allows the photographer to keep the shutter without following the rotation of the camera, and there are many benefits.

The biggest advantage is that you don't have to press the shutter on the body, which can prevent the resulting body shake.

Here's how to use the Canon shutter cable:

1. First of all, the tripod should be set up, if the wind is too strong when shooting, you can fix the tripod with a heavy object.

2. Next, take out the wireless receiver and connect the cable to the camera: plug one end of the cable into the wireless receiver, and the other end of the camera shutter link port. After the wireless receiver is linked to the camera, hang the hook on the top of the wireless receiver to fix the wireless receiver.

3. After connecting the wireless receiver to the camera, turn on the camera, debug the camera to the M gear, and ISO debug it manually.

4. Take out the wireless transmitter and press and hold the arrow button to debug, set the time-lapse shooting time to 3 seconds, set the interval time to 3 seconds, move the arrow button to set the number of shots to 100 shots, and then press the start stop button to start the file and the camera will shoot according to the set program.

5. During the shooting, if you want to stop shooting, just press the state pickpocketing to start the stop button timing, and then press the shutter button to stop shooting.

How to use the shutter release cable of the SLR camera: first connect the shutter release cable to the SLR camera, then aim the camera at the target that needs to be shot, and press the switch of the shutter release cable when everything is ready. The shutter release cable significantly reduces shake, and the shutter release function is to control functions such as the camera's ** and continuous shooting in addition to releasing the shutter.

The remote control cable that controls the shutter is often used for long-distance control photography, continuous shooting, and can control the camera to take pictures while preventing vibration caused by touching the camera surface and preventing damage to the integrity of the picture. The product is widely used and is used by almost all photography enthusiasts.

Whether it is a traditional or digital photographer, more or less will encounter the vibration and skew of the camera due to the excessive force at the moment when the Zen press the shutter, resulting in damage to the integrity of the picture and the reduction of the quality. A good way to avoid this is to use a "shutter release cable" that controls the camera to take pictures and prevents vibrations caused by touching the surface of the camera, which can prevent damage to the integrity of the picture.

1. It can prevent the camera from vibrating; Second, you can create long-term photography.

When you can't press the shutter with your hand, you have to use the shutter release. For example, for a long time, the camera is not moving on the tripod, and of course you can't touch the camera with your hands, so you can only use the shutter release cable.

Different models of Canon cameras use different shutter release cables, here are a few examples:

Shutter Release: RS-8On3, can be used in: 1DS III 1DIV 5DII 7D 50D 1V etc.

Shutter release: RS-60E3, can be used in: 550D, 500D, 450D, 1000D, etc.

There is also the mechanical shutter release cord used by Canon cameras in the film era before.