Why did the board of Yingtai 970 shrink my memory module???

Updated on number 2024-04-16
13 answers
  1. Anonymous users2024-02-07

    Even if your motherboard supports it, the system doesn't support it, so the bottleneck of your computer is in the system.

    The xp32 bit can recognize it up to the maximum and can use it.

    Win7 32-bit can recognize up to 4GB, and it can be used.

    If you want to fully exploit the performance of your computer, it is recommended to use a 64-bit system, or the server version of the system does not use a 64-bit system, and pay attention to software compatibility.

  2. Anonymous users2024-02-06

    Alas,Why do you say that?,It's the genius himself who has shrunk.,For stability,,The spd value of the strip is set to 1333 by default to boot.,Understand?

    In fact, in many cases, although the memory is nominal DDR1600 specification before leaving the factory, the default SPD of the system is up to DDR1333, in order to keep the product working normally at the most stable frequency on any platform. In order for the memory frequency to work on the DDR1600, it must be adjusted manually.

    You can set the DRAM Timing to 1600 in the BIOS.

  3. Anonymous users2024-02-05

    32-bit systems do not support more than 4G memory. The 1600 must be mated to the motherboard. Dual-channel, as long as the model is exactly the same, then read the motherboard manual.

    Insert into a slot that can open dual channels. 8G memory is estimated to be the entire virtual disk as virtual memory. Otherwise, it would be a waste.

    Otherwise, it's win7x64, and then install an XP or other virtual machine.

  4. Anonymous users2024-02-04

    First of all, this motherboard supports dual-channel DDR3 2000 (overclocking) 1866 1600 1333 1066 800MHz memory, if the memory is dual-channel, then the frequency is 1333, check if your memory description is up to 1333, if not, you can overclock the memory.

    1600MHz, dual-channel memory is available. Kingston 8GB DDR3 1600 is recommended

    Kingston 8GB DDR3 1600

    Applicable type: Desktop.

    Memory capacity: 8GB

    Capacity description: single bar (8 GB)

    Memory type: DDR3

    Memory frequency: 1600MHz

    Slot type: dimm

    CL delay: 11-11-11-35

    Number of pins: 240pin

    Operating Voltage:

  5. Anonymous users2024-02-03

    It must be able to run smoothly, the graphics card is good, CPU performance, under full on, the team battle is almost good, just reduce the resolution appropriately, buy an FX6300 hexa-core 580 yuan in the future, overclock, you can run large games.

  6. Anonymous users2024-02-02

    This configuration can play lol, and it's not low.

    The system uses win7 64-bit, medium or above effect.

    X4 245 no problem!

  7. Anonymous users2024-02-01

    I can play! The special effects are turned off, and it's a dual-core game.

  8. Anonymous users2024-01-31

    This motherboard supports dual-pass attack on the mu road DDR3 2000 (overclocking) 1866 1600 1333 1066 800MHz memory, if your memory is dual-channel, then the frequency burn penetration rate is 1333, check whether your memory description is up to 1333, if not, you can overclock the memory. Satisfied.

  9. Anonymous users2024-01-30

    That's right,Dual-channel frequency beam argument rate to take the oak hidden to 2,It's 1333,If your strip 1600 is not the default performance is overclocked,Portable manufacturers are deliberately shaking this in order to make money,Just go into the BIOS,Find XMP,Super back to 1600。 Read the motherboard manual, BIOS settings by yourself.

  10. Anonymous users2024-01-29

    The 970 series is generally fine. That's my guess. And so it should be!

    Memory type: DDR3

    Memory slots: 4 DDR3 DIMM

    The maximum memory capacity is 32GB

    Memory description: Dual-channel DDR3 2000 (OC) 1866 1800 1600 1333MHz memory is supported.

  11. Anonymous users2024-01-28

    1. Can be added.

    2. And it is also dual-channel, which is unequal dual-channel.

  12. Anonymous users2024-01-27

    I'm not here to solve the problem for the landlord, I want to say that the landlord is a good choice, and the cost performance is unusually high, and a group of people buy FX8350 with a painful face.

  13. Anonymous users2024-01-26

    In the BIOS - menu - bio-unlocking, this is the option of one-click core unlocking, change to: enabled (enabled), save and exit.

Related questions
12 answers2024-04-16

Don't care about the times.

Virtual memory: 1. Right-click [My Computer] [Properties] [Advanced] tab, 2. Click [Settings] in the [Performance] column to continue clicking the [Advanced] tab, 3. Click [Change] in the [Virtual Memory] column to pop up the [Virtual Memory] dialog box, and you can set it. >>>More

13 answers2024-04-16

Take a look at the following options:

Open Jianying. Click the **bar, you can drag the entire **position, select the part you want to delete, click Divide first, split the part that needs to be deleted separately, and then click the delete key below. >>>More

36 answers2024-04-16

Uh,The graphics card of the Internet café is better than yours.,The memory is also large.,3G memory can also be used.,Otherwise, buy a 1G.,It's not very cost-effective.,If it's an online game 3D,It's also related to the network speed.,Your graphics card is also a little low.,It's estimated that you have to sacrifice some special effects.。

37 answers2024-04-16

We know that the C disk uses the part of the hard disk that is closest to the center of the circle, and this part of the track is the smallest. >>>More

16 answers2024-04-16

The coat color gene of the poodle is very unstable, when I was a child, I looked at the coat color was very dark, and when I grew up, it will become more or less light, and some people looked at the coat color when they were young, but they were very dark when they grew up, which also became the phenomenon of the poodle's coat. >>>More