How do you set virtual memory to 1 5 times that of physical memory?

Don't care about the times.

Virtual memory: 1. Right-click [My Computer] [Properties] [Advanced] tab, 2. Click [Settings] in the [Performance] column to continue clicking the [Advanced] tab, 3. Click [Change] in the [Virtual Memory] column to pop up the [Virtual Memory] dialog box, and you can set it.

4. Select [Custom Size], set 1024 in [Initial Size], and set 2048 in [Maximum] (cannot exceed the memory addressing range of the 32-bit operating system - 4GB).

It is recommended to check the size of [System Management], so that it is easier for the system to allocate the size by itself, and finally click [Settings] to take effect. If necessary, restart your computer.

It is recommended that you move the virtual memory to a disk other than the C drive, such as the D drive. to reduce the pressure on the system disk.

Method: Still in the [Virtual Memory] dialog box, click the C drive label, and select [No paging size].

Then select the D drive label, select [Custom Size], and set [Initial Size] and [Maximum].

First there is no pagination setting, and then make sure, in the custom size, you have to count a few times yourself, not so you can only say a little bit of your own doubling, you can count as much as you want.

There's no need to be so accurate, you can write as much as you like, and usually the machine will slow down due to the wrong settings.

I'm setting it to 1000-1500

I have memory 512

If it's big enough, you don't really need to set it up. But how big is this, Microsoft did not give a standard. Someone has experimented that 32GB is optional, and 16GB may not be used. No matter how small, it's not big enough. 8G has been tried, but it doesn't work.

In fact, virtual memory occupies a part of the hard disk space, so that the system is best hosted.

1. With the continuous increase of available memory of the computer, virtual memory is becoming less and less important, and it is generally not necessary to care about it, and it is best to let the system be hosted.

2. But pay attention to the C drive not too full, leaving some space for page files in virtual memory.

3. The general capacity of virtual memory is times that of physical memory.

Virtual memory is also known as virtual memory. Programs running on a computer need to be executed through memory, and if the program is executed that takes up a lot of memory or a lot, it will cause the memory to be depleted. To solve this problem, virtual memory technology is used in Windows, that is, a portion of the hard disk space is used as memory usage.

When the memory is depleted, the computer will automatically call the hard disk to act as memory to relieve the strain on memory. If the computer runs out of RAM required to run programs or operations, Windows compensates with virtual memory. It combines your computer's RAM with the temporary space on your hard drive.

When RAM runs slowly, it moves data from RAM into a space called a "paging file". Moving data into a paging file frees up RAM so you can get the job done.

Virtual memory is a storage function that replaces physical memory, but cannot replace the running function of physical memory. So, generally speaking, the larger the RAM capacity of the computer, the faster the program will run. If your computer's rate is slowed down due to lack of RAM available space, you can try to compensate by adding virtual memory.

However, computers can read data from RAM at a faster rate than from a hard drive, so expanding the RAM capacity (with memory sticks) is the best option.

If the physical memory is more than 16G. It's time to turn off the virtual memory. Save hard drive space.

The performance experience would be a little better. Virtual memory is a product of the low memory of the past. It is the hard disk that is used as memory.

Now the memory capacity is large. It's time to turn off the virtual memory.

Method 1:

Install one more piece of physical memory. Of course, this is the most fundamental and fastest way to solve the problem. 2G memory exists,For win7It's just enough,Waiting for us to install too many programs will inevitably lead to slow running of the system。

If you can, directly change to a 64-bit operating system, so that the system can better recognize the large memory and call it.

Method 2:

Install some memory decluttering software, and then run large programs, which is to run memory decluttering software first. to alleviate high memory usage.

Method 3:

Set up a larger virtual memory. The virtual memory must be set to be multiple times the actual memory.

It is also necessary to develop good anti-virus habits and adjust the startup accordingly. Reduce unnecessary startup programs, clean up plugins and services. Through the above methods, you can easily solve the problem of high physical memory usage.

Computer -- Properties -- Advanced System Settings -- Performance -- Virtual Memory Settings

The maximum and minimum values are recommended to be the same, and this value is recommended to be multiple of the physical memory, if the setting is larger, it will not be beneficial.

Therefore, if the physical memory is not enough, if you want to improve the speed, the only way to increase the speed is to add a memory module, and virtual memory is only a temporary alternative.

Do a few jobs:

1):Open my computer, right-click "Local Disk C" Properties, click "Disk Cleanup", and check "**Site", "Stale Data", "IE Temporary Files". etc., click "OK" and click "Yes".

2): In Open My Computer, right-click "Local Disk C" Properties, and other options in the "System Restore" box Click "Yes" Click "OK" Click "Yes".

3): Right-click on My Computer Properties System Restore Select C Settings and move the slider to the left to the minimum, or close the Application OK.

4) Set the correct virtual memory: Right-click on My Computer--- Properties--- Advanced --- Performance box, click on the 'Settings' card--- click on the 'Advanced' box -- click on the 'Virtual Memory' box to listen to 'Change' -- select 'Custom Size'.

In general, the maximum value is a multiple of the initial value.

How is the maximum value determined? Open the Task Manager --- click on 'Performance'. Look at what the 'Peak' is in the 'Approved Usage' box at the bottom left, which is calculated in Task Manager.

1mb。Extrapolate it to MB units, which is the maximum value. (Open it a few more times and see the highest value in a few times). For example, my peak is 650328k. Then the maximum value of my computer is 650328k

1024=636MB, then the initial value is 318MB. Once you've filled it out, click Change.

5): It is also the most important step, upgrade the anti-virus software, Trojan kill, restart the machine, press F8 to enter the safe mode, and scan and kill the whole disk in the safe mode, this step is best done every once in a while. And regularly upgrade anti-virus software, firewalls, and Trojan horses.

Perform the steps every three to five days.

Memory plays a big role in a computer, all the programs running in the computer need to go through the memory to execute, if the execution of a large number of programs or a lot, it will cause the memory to be exhausted. In order to solve this problem, virtual memory technology is used in Windows, that is, a part of the hard disk space is used as memory, and when the memory is occupied, the computer will automatically call the hard disk to act as memory to relieve the tension of memory. For example, if the computer only has 128MB of physical memory, when reading a file with a capacity of 200MB, it must use a relatively large virtual memory, and the file will be stored in the virtual memory after being read by the memory, and then the files stored in the virtual memory will be released into the original installation directory.

Therefore, if you don't have virtual memory, it's basically not possible! Set up virtual memory to speed up your system!

Settings for virtual memory.

Nowadays, there are many tools (such as Windows Optimizer, Super Rabbit) that can change these settings very well, and the tools will also make corresponding recommended settings according to the actual situation of your computer.

Setting up virtual memory can help alleviate the lack of memory**! to speed up your computer!

Virtual memory.

It is a technical measure when Windows was launched, used to alleviate the slow speed of the hard disk at that time, because the memory is much faster than the hard disk, so it caused a large number of data read by the hard disk to be read at once, so it produced this virtual memory technology, when idle.

Read-ahead data to virtual memory, in fact, virtual memory is also hard disk space, but because the data has been processed, it is much faster than simply reading the hard disk. Since it is read-ahead, there is a false read-ahead, so the capacity of the virtual memory will be larger.

Physical memory. A lot of capacity to catch up.

If the memory is less than 512M, the virtual memory is usually larger than the physical memory. After the memory reaches more than 2G, it is time to set the virtual memory in another way: use the virtual hard disk software to virtualize a part of the memory into a hard disk, and then set the virtual memory to the drive letter of the virtual memory.

You must know that the read and write speed of the memory is not comparable to that of the hard disk, and 2G of memory under XP is enough for most jobs.

[Problem description]:

How to set up virtual memory.

Easy Steps]:

My Computer] Right-click - [Properties] - [Advanced] - [Performance] - [Settings] - [Advanced] - [Virtual Memory].

Solution]:

Set up virtual memory.

Figure 23If you need to change the virtual memory to which partition, you can directly click on the corresponding partition, and then select [Custom Size] to adjust.

Figure 3 Note: How to check the physical memory size.

Figure 4 [Problem Description]:

How to set up virtual memory.

Easy Steps]:

Computer] Right-click - [Properties] - [Advanced System Settings] - [Performance] - [Settings] - [Advanced] - [Virtual Memory].

Solution]:

Set up virtual memory.

Figure 33If you need to change the virtual memory to which partition, click the corresponding partition directly, and then select [Custom Size] to adjust.

Figure 4 Note: How to view the physical memory size.