How long does it take for a newly bought refrigerator to be turned on for the first time?

At least one day. Keep the refrigerator in a stable place.

Try to let the refrigerator change it after an hour before we use it.

After the refrigerator is newly bought, it is best to let it sit for an hour if possible.

Most of them will cause some of the refrigeration and maintenance components in the refrigerator to flow backwards when they are transported. So let's not use it as soon as we come back.

If the refrigerator can be guaranteed to be transported upright at all times during delivery, it can be powered on immediately.

The refrigerator is a must-have appliance in our family, how long can the refrigerator be used for the first time? This problem is still more important, if the refrigerator is bought back and put things directly, there may be a lot of failures in the later stage. Today, I will tell you how long the refrigerator can be used for the first time, I hope it can help you.

1. How long can I put things in the refrigerator for the first time.

1. When we use the refrigerator for the first time, especially the refrigerator we just bought, we should leave it for at least 4 or 6 hours before turning it on, and then adjust the temperature inside to 2 3 gears, and after 1 2 hours of normal operation, we can put things in normally.

2. The first time you use the refrigerator, you can't store too much food during the storage time, and you should leave some space to keep the cold air circulating inside, if you put too many things in the refrigerator, it will affect the refrigeration effect of the refrigerator, so a small amount of food can avoid the refrigerator from working at a full load for a long time.

3. When using the refrigerator, hot food must not be put into the refrigerator, so as not to cause some failures in the refrigerator.

4. When we use the refrigerator for the first time, we must pay attention to using a plastic bag or plastic wrap to put the food in a container and then put it in the refrigerator, so that the refrigerator will not absorb the moisture on the food, and the water on the food will evaporate in the refrigerator, which is likely to cause the refrigerator to freeze.

5. Food with water must be dried before putting it in the refrigerator, for example, freshly washed vegetables must not be put into the refrigerator immediately, so as to avoid excessive water vapor and frosting, and the internal system of the refrigerator will be damaged after a long time.

6. You can put some glassware in the refrigerator, but you must not put glassware in the freezer to prevent the glassware from freezing and cracking.

You should not put anything in it until you have left it open for two hours to ensure performance and extend the life of your refrigerator.

It usually takes a day to be able to put things in it so that the refrigerator will start to refrigerate, and you must clean the refrigerator well before putting things in.

Wait at least two hours or so, because two hours is enough for the smell in the fridge to dissipate. It can also be used normally. Does not cause food poisoning.

How long does it take for a new fridge to be powered on for the first time to put things is as follows:

1. The new refrigerator needs to wait for 3 hours before placing things, and the refrigerator should be left for 2 hours after the refrigerator is powered on, so as to avoid the refrigeration oil inside the refrigerator from entering the pipeline.

2. After 2 hours, the compressor can work normally, so as to avoid the compressor being burned out, after 2 hours, you can put things on for another 1 hour, which can not only remove the odor, but also save more electricity.

3. Before placing the refrigerator, check whether the ground is flat, if there is a problem of unevenness, try to deal with the flatness, otherwise it may affect the normal use of the refrigerator in the future, when installing, if the refrigerator feet are uneven, the bottom should be flattened, so as to avoid the problem of tilting the fuselage.

Pay attention to the new refrigerator before use:

1. After moving to a new house, do not plug in the power supply immediately, but need to open all the doors of the air conditioner, take out the internal freezers, expose them to the air for a period of time, and wait until the internal odor has dissipated, and then stuff the freezer into the refrigerator, close the refrigerator door, and then plug in the power supply.

2. Prepare a clean towel, soak it, then wring out the water of the towel, and then wipe all surfaces inside the refrigerator with a towel to clean up the stains. After the interior is cleaned, the outer surface of the refrigerator needs to be cleaned. In addition, it should be noted that the refrigerator needs to be placed in a ventilated area to enhance the service life.

3. Check whether all accessories in the refrigerator are installed in place, and check whether the filter plug is put on the drain at the lower part of the refrigerator room. And when you turn on the machine for the first time, you should make sure that the indoor temperature is not too low, otherwise it is easy to cause damage to the refrigerator and affect the use.

The new refrigerator is powered on for more than two hours before putting things in. Because the manufacturer fills the refrigeration system with a certain amount of special lubricating oil during the production process, when the home appliance manufacturer delivers the new refrigerator, the refrigerator has been moved or even tilted through bumps, and the lubricating oil in the refrigerator will flow into the coil of the heat exchanger along the pipeline.

Features of the first power on of a new refrigeratorIf the new refrigerator is turned on and running, if there is a certain amount of lubricating oil in the cylinder, it will affect the work of the compressor, and the heavy will cause liquid shock to completely break the cylinder, so that the refrigerator refrigeration system will be paralyzed.

If you buy an electronic refrigerator, you can adjust the freezer to minus 12 degrees Celsius and adjust the refrigerator to about 4 to 9 degrees, in this case, after the compressor starts, it depends on how high the indoor temperature is, and in winter, it generally takes 1 to 3 hours to refrigerate.

Inside the compressor, there is a smaller "department" called the "oil reservoir". The oil reservoir is filled with lubricating oil (also known as "refrigeration oil"). When the bearing of the compressor is running, the lubricating oil in the oil reservoir will be pumped out (every time the bearing rotates, the newly bought refrigerator may have been turned for a long time before it is sent to the home, and it will even be tilted, at this time, the lubricating oil in the refrigerator will flow into the coil of the heat exchanger along the pipeline, and a small amount of lubricating oil will also be poured into the compression under the action of bumps and vibrations.

<> compressor at the bottom of the refrigerator. Without the refrigeration oil, the refrigerant will enter the pipeline after the refrigerator is started, and the refrigerant will corrode the pipeline without the lubrication and protection of the refrigeration oil. to avoid burning out the compressor.

In addition, it is necessary to work for a period of time with electricity、Preferably.。。 Reach the set temperature in the refrigerator. Put the food in after the shutdown、This is also to protect。

It does not increase the working load of the refrigerator, so as to achieve the purpose of saving electricity. After returning, it will be used immediately with electricity, so the cooling effect will definitely not be so good. Moreover, if you insist on powering up the cylinder when there is a lot of oil leakage, the cylinder may be damaged.

Although this transportation is not necessarily like this, but in order to be safe, we should put the refrigerator and refrigerator flat for more than 1 hour and wait for the lubricating oil to flow back into the compressor before turning on the power supply, it can also avoid the compressor lack of oil to burn the cylinder, the shaft and the cylinder due to sucking. There is a risk of damage to the compressor due to liquid shock from the return oil. Understanding these two points, it is not difficult to find that it is impossible to ensure that the inclination of the refrigerator does not exceed 45 degrees during normal handling, and once it exceeds this angle, the lubricating oil in the compressor will follow the refrigerant.

Flow in the refrigeration pipeline, at this time, if the capillary aperture of the refrigeration circulation pipeline of the refrigerator is relatively small, there may be oil blockage, if it can be determined that there is no side or reverse during the transportation process, it is not necessary.

After the new refrigerator is started, it should be at least half an hour before things can be put in, because the first time the new refrigerator is started, the equipment must be run, and things can be put in every half an hour to have a better refrigeration effect.

The new refrigerator should be left on for 2 hours before turning it on, and it can be turned on for 1 hour before putting things on. The main purpose is to prevent the refrigerated oil from running into the pipeline during transportation, and the refrigerated oil will reset and return to the compressor after 2 hours of standstill. In addition, it is necessary to work for a period of time with electricity, and it is best to reach the set temperature before putting food in after the refrigerator is shut down.

You can put things in after an hour or so, because the new refrigerator starts slowly, so an hour is just right.

You need to wait at least an hour before you can put something inside, because it takes a certain amount of time for a new refrigerator to function properly after starting, and putting it in too early will not have the effect of keeping it fresh at all.

For refrigerators that are first plugged in, the start-up time is relatively longIt takes about 5 to 6 hours before the downtime is possibleThis is because the refrigerator needs enough cooling capacity to go from room temperature to minus 18 degrees.

Under normal circumstances, the refrigerator is basically stable after 24 hours of continuous operation, and the start-stop ratio tends to be normal.

The newly purchased refrigerator should be left for 3 hours before it can be plugged in

Because the compressor of the refrigerator refrigeration system needs to be protected by lubricants when it is running, under normal circumstances, the manufacturer will put a certain amount of lubricating oil in the refrigeration system and seal it inside. During the refrigerator transport, the resulting bumps cause the lubricating oil to flow into the coils of the heat exchanger.

When there is a severe bump, it tilts and the oil can flow into the cylinders of the compressor. Immediately after delivery, the lubricating oil in the pipes will block the flow of refrigerant and will also affect the normal operation of the compressor. The serious consequences are that the lubricating oil hits the cylinder and paralyzes the operation of the refrigerator.

At least let it sit for about two hours.

If the refrigerator is bumpy and vibrates during operation, or after being placed flat and transported, it is recommended to stand for 24 hours before powering on the test.

Attached to the common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, open the door to let the odor inside dissipate and then use the electricity, or use an electric fan to blow it inside to speed up the emission of the odor.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted to minus 18 degrees, and the temperature of the refrigerator should be about 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

With the continuous development of science and technology, refrigerator has become a necessary appliance in every family, almost every family has a refrigerator, the basic function of the refrigerator is to keep food cold, low temperature helps to prolong the freshness of food, the basic principle of refrigeration is to reduce the activity of bacteria, so that bacteria need to take longer to make food spoiled. Now there are many families who want to buy a new refrigerator, but there will be many questions, such as how long does it take for a new refrigerator to be powered after it is bought? This is a question that many people want to know but don't know, and today I will introduce to you how long it will take for a new refrigerator to be powered on just after it is bought.

One: How long does it take for a new refrigerator to be powered when I buy it?

1: Many friends have just delivered their newly bought refrigerators to their homes, and they immediately use them with electricity, which is actually wrong. This is because the operation of the refrigerator compressor needs to be protected by lubricant, and the refrigerator will pour some special lubricating oil into the refrigeration system during the production process, and the lubricating oil and refrigerant will be completely enclosed in the refrigeration system when the refrigerator is completed.

And before the refrigerator we bought is sent home, it may have been turned over for a long time, and even will be tilted, at this time, the lubricating oil in the refrigerator will flow into the coil of the heat exchanger along the pipeline, and a small amount of lubricating oil will also be poured into the compression cavity of the compressor under the action of bump and vibration, so that the refrigerator is easy to cause the refrigerator refrigeration system to be paralyzed after starting, so for the sake of insurance, after the new refrigerator arrives, it should be left to stand for 2 to 4 hours before turning on, so as to avoid oil circuit failure.

2. Pay attention to the placement.

1: The refrigerator should be placed in a dry and ventilated place, with a distance of more than 10cm from the wall, and the floor should be flat. Easy to dissipate heat.

Three: electricity safety.

1;The refrigerator should use a single-phase three-pin socket with separate wiring. Pay attention to protect the insulation layer of the power cord, do not overload the wire, and do not change or lengthen the power cord at will.

Fourth: the temperature setting should be appropriate.

1: The running time should not be too long when used for the first time, and it should be carried out intermittently to give each part of the refrigerator a run-in process. Then run it on a low gear or set the temperature slightly higher.

If it is mechanical, adjust the thermostat according to the outside temperature. (The higher the outside temperature, the smaller the number of the temperature control regulator should be, and the lower the outside temperature, the larger the temperature control adjustment number.) When the outside temperature is lower than 16 degrees, if there is a winter compensation switch, please turn it on, which is to help the refrigerator work.

The winter compensation switch is usually located on the side of the thermostat.