Router problem points less help thank you

Connect the incoming line to the WAN port of the router, and the LAN port to the outgoing line to the computer, and you can use the computer to access the router.

1.Enter the address of the router in the address bar of the browser and press enter to log in to the router.

The general default address is.

Some routers are (eg.

To enter the router login interface, you need to enter the account number and password.

Common default username for routers: admin and password: admin

2.After logging in successfully, you can see the main interface of the router.

Generally, on the left side are the control menus, and clicking [Running Status] on the main interface will display the status of each port of the router.

The LAN port status displays the IP address of the LAN port, that is, the access address of the router, which can be changed in the LAN port settings.

If the WAN can obtain the IP address, the router's external network connection is normal.

In other words, if the WAN port cannot obtain the IP address, the network other than the WAN port of the router is faulty. The router to your computer is fine.

3.Network parameter settings.

In the WAN port setting, the general home router will use the PPPoE type, which is what we call the dialing method. Some leased line networks will be set to a fixed IP address.

Select the PPPoE type, then enter the Internet account and password given to you by the operator, and click Connect to automatically dial up the Internet.

If the dial-up message fails, check whether the account and password are correct, whether the payment is in arrears, or whether the network cable or modem connected to the WAN port is normal.

You can also try to skip the router directly, use the computer's network cable interface, directly connect to the home line, and dial up the Internet. If there is an error message, see Dial-up Internet Error**.

The LAN port is the interface that connects to the computer network card.

Generally, simple networks do not need to set LAN port parameters, and the default settings are good.

If you have multiple VPN devices in your network, you need to set the LAN port IP, otherwise there will be IP address conflicts and you will not be able to connect to the network.

4.Wireless setup (wifi setup).

Wireless Settings] [Basic Settings] You can set the name of the wireless router.

In [Wireless Settings] [Security Settings], set the password for wireless Internet access (WiFi).

Server settings.

DHCP service setup is simply to set the IP address range and DNS that can be automatically obtained by the computer.

There are no special requirements and no settings.

If you disable the DHCP service, the computer will not be able to obtain the IP address automatically, and you need to manually configure the IP address, otherwise you will not be able to access the Internet.

What is the problem with the router, hardware or not?