-
Anonymous users2024-02-07What kind of sound? How long and how short? Pay attention to listen It may be a hardware issue.
I'll show you this.
1 Short: The system starts normally. Shows that there is nothing wrong with the machine.
2 Short: General error, please go to CMOS Setup and reset the incorrect options.
1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.
1 long and 2 short: The display or graphics card is wrong.
1 long and 3 short: The keyboard controller is wrong. Check the motherboard.
1 Long 9 Short: Motherboard Flash RAM or EPROM error, BIOS corruption. Try a different block of flash ram.
Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. Reinsert the memory module, or replace the memory.
ami bios
1 Short: The memory refresh failed. Replace the memory module.
2 Short: The memory ECC verification error is incorrect. Setting the memory option for ECC check to Disabled in CMOS Setup will solve the problem, but the most fundamental solution is to replace a memory.
3 Short: The basic memory check of the system fails. Change memory.
4 Short: The system clock is wrong.
5 Short: There is an error in the CPU.
6 Short: Keyboard controller error.
7 short: The real mode of the system is wrong and cannot be switched to protection mode.
8 Short: A memory error is displayed. If there is a problem with the display memory, try changing the graphics card.
9 Short: BIOS chip check and error.
1 long and 3 short: memory error. If the memory is damaged, it can be replaced.
1 long and 8 short: A test error is displayed. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.
phoenix bios
1 Short: The system starts up normally.
1 short, 1 short, 1 short: The system initialization failed.
1 Short 1 Short 2 Short: Motherboard error.
1 short 1 short 3 short: CMOS or battery failure.
1 Short, 1 Short, 4 Short: ROM BIOS verification error.
1 Short, 2 Short, 1 Short: The system clock is incorrect.
3 Short 2 Short 4 Short: Keyboard controller error.
3 Short 3 Short 4 Short: A memory error is displayed.
3 Short 4 Short 2 Short: Error is displayed.
4 Short, 2 Short, 1 Short: Clock error.
4 Short 2 Short 2 Short: Shutdown error.
4 Short, 3 Short, 1 Short: Memory error.
4 short, 4 short, 1 short: The serial port is wrong.
4 short, 4 short, 2 short: the parallel port is wrong.
Comparison table of the meaning of the old Award BIOS alarm sound and fault.
1 Short: The system starts normally.
2. Short: The CMOS setting is incorrect, and it must be set again.
1 long and 1 short: The memory or master version is wrong, change the memory or change the main version.
1 long and 2 short: The display or graphics card is wrong, and the display card may not be plugged in.
1 long and 3 short: keyboard controller error, master version problem.
1 long and 9 short: Flash RAM or EPROM error of the master BIOS, serious master issues.
Repeated, short ring: Power issue.
Constant ringing: The memory is not plugged in tightly or is corrupted.
-
Anonymous users2024-02-061. There is a problem with the graphics card 2. The data cable between the graphics card and the screen is not right.
-
Anonymous users2024-02-05Is it a desktop mainbox? Be clear.
-
Anonymous users2024-02-04Not necessarily, it should be caused by poor hardware contact or abnormal BIOS of the motherboard.
We recommend that you perform the following operations:
1. Turn off the power, open the case, clean up the dust, especially the dust of the CPU fan, and check whether the CPU fan is rotating normally. Plug and unplug the hard drive data cable and power cable (this is more important).
2. Power off, open the chassis, plug and unplug the memory, wipe the gold finger part with an eraser, and plug it back in (don't reverse it).
3. Plug and unplug the graphics card, wipe the gold finger part with an eraser, and reinsert it tightly (the buckle should be buckled).
4. Unplug the power cord, cut off the motherboard button battery, wait for three minutes, and then reinstall the motherboard.
5. If the above operations cannot solve the problem, it is recommended to send it to the maintenance center.
1. Check with software.
2. No, but note that the memory parameter with the low one is acceptable. >>>More
The most critical thing for computers to install memory is the compatibility of old and new memory, that is, the same brand, the same specifications, the same frequency of different batches of memory will also be wrong not to identify or incompatible problems, the main performance is a black screen, a blue screen after starting the system and can not identify the memory at the same time, etc., the solution can only be through the method of boot test after installing the computer, if the above phenomenon does not appear, the compatibility is very good and can be used with confidence, so it is recommended to take the computer to the computer city to find a business that mainly makes memory modules to upgrade the memory, so that problems can be easily solved.
This is when your computer "lost" or "mistakenly deleted" the "System Files", or the "System Files" was sick. >>>More
It would be better to change it directly to a 2g one
Because of the memory frequency shown in CPU-Z.
is the real frequency, and the frequency that is usually said is the equivalent frequency, which happens to be the real frequency x2. >>>More