How much is an 80 Carter excavator worth now in 2 years

It is about 1.9 million, and the bucket capacity is the width of the square bucket mm and the operating weight (standard) tons.

Engine Model Carter C9 ACERT

Number of cylinders, bore, stroke, mm 6 112, 149 displacement.

Suction method: turbocharged EFI.

Rated power: 200kw (268ps), 1,800rpm, diesel tank capacity: 620 liters.

Shipping Dimensions: Overall length 10,200mm

The total width is 3,190mm

The overall height is 3,700mm

Digging performance Bucket max. digging force kn

The maximum excavation height is 9,920mm

The maximum loading height is 6,500 mm

The maximum excavation radius is 10,090mm

The maximum digging depth is 6,310mm

Walking parameters Track width 600mm

Full length of tracks. Travel speed.

Climbing ability 30 degrees.

Hydraulic pump type: 2 variable pumps.

Gear pump 1 pcs.

I am a worker in Carter's Xuzhou factory, and it is said that the new standard configuration of the 306 machine is about 400,000, the 320 machine is more than 900,000, the 323 machine is more than 1.2 million, the 324 machine 329 is forgotten, and the 336 machine is more than 1.9 million. Next year, we will produce 340 machines and 349 machines, as for the 80 machines you said, I don't know this model, there are 385 I know, made in Japan. Are you talking about Shandong's copycat Carter?

It should be Carter 307, and it seems that there is no model of the 80. The price difference between a 1-year and 2-year-old car is not very large.

1. Condition, whether the big and small arms have been fried, whether the chassis has been deformed, etc.

2. Working time, 9000-10000 hours in 5 years is relatively normal. If there is less time, it will be a plus, and if there is more time, it will be discounted. It is not recommended to change the time, friends who engage in second-hand mobile phones do not look at the watch, and you can know the working hours by looking at the wear and tear of the chassis.

3. The maintenance relationship is the situation, after all, it is a second-hand phone, and how long it can be used in the future has a lot to do with the previous maintenance situation.

4. Location, Carter excavator is generally in the northwest, southwest is the most popular, and the second-hand hand over there will be higher than other places.

In addition, there was direct injection or EFI in the past, which is also a factor affecting the first. If you can shoot, you can basically estimate it.

It is recommended that you go to the local cat**. Spend some money and they should get it.

Certificate?

I work at Carter.

Diesel Even if it is 7 yuan per kilogram, it is less than 100 Ah, my machine is generally about 70-80 yuan.

Hello, according to the 2017 ** Carter 320d new machine in about 1.15 million, the new machine is not cost-effective, you can go to the large second-hand excavator market to see, such as Kunshan Disheng second-hand excavator market, the general condition of the Carter 320d is about 367000 to 600,000, hope to adopt.

In the case of 320d, depending on the configuration, it is about 1 million.

There are more than 100 new machines, about 11 points.

320D has not been produced for 14 years, this machine is smooth, very little inventory,

The Carter 320 excavator can be viewed in the Iron Arm.

More than one million, ask the local ** business for the specific situation.

The excavator's holding car is actually caused by many problems, here in addition to its own engine power is not enough, the most common is caused by the imbalance of the hydraulic system, the simple and effective way is to adjust the pressure of the main hydraulic pump, but it is a symptom but not a cure. If you want to solve the problem, clean the hydraulic system clean and thoroughly (talking about the entire hydraulic system!). ）

To give you a way, you can search on the iron armor mobile phone to see if there is a model with the same number of years and hours, and see how much people sell it. Or see if you think the machine is in similar condition and estimate it yourself.

In fact, you can also post ** information directly on the iron armor mobile phone for free.

That's all I know, I hope it helps you, please adopt! Ha ha!

Is there a 320 band model? Is it 320, or is it 320b, c, d? **C, D type machine is higher. 220-230 hours per month, **3w-3w5. 260 h for own oil, 150 h for each other's oil.

The 20-ton class is about 250 per hour

Now there are many online platforms engaged in construction machinery leasing, such as the construction machinery leasing platform.

Also, the equipment is more real and can be referenced.

Now the carter fee oil, and then it also depends on the area, the current region** is different.