iPhone 6S won t turn on?

Apple 6 S Phone Boot Solution: First of all, because it can't boot 1. The phone does not turn on, it is divided into various types, if it is a collision failure.

Figure 2. Then there's no need to make a fuss, just press and hold the "Power" and "Home" buttons at the top of your phone. Figure 3.

If you don't press start at the same time, remember not to let go, pressing for about 10 seconds usually starts. ？Two reasons to run away1.

Many users have reported that after jailbreaking, their phones start not turning on. Figure 2. If it's a jailbreak, or a system upgrade, and the phone doesn't work, just connect iTunes to fix it.

Figure 3. Or can it be fixed using other mobility assistance software? Hardware failure The motherboard of Apple iPhone is not one and has many chiplet structures, including baseband, CPU, hard disk, WiFi module, touch screen IC, etc.

Many small places do not know how to repair the chip, and it is recommended to replace the entire motherboard, which is very expensive. Guangzhou has been a maintenance master and is familiar with these situations. Some stores are customers for the motherboard, and a motherboard is as expensive as a second-hand mobile phone.

First of all, we need to make sure that the phone is fully charged, if the battery is dead or the battery is too low, it will not turn on. Take out our mobile phone, find the power button, and the apple key, press and hold for 6---10 seconds, the power button can also be called the lock screen key, the apple key, can also be called the fingerprint key, or home summer, it will be caused by the overheating of the phone, and can not be turned on, please cool down the phone first, after cooling, in the press and hold the apple key, and the power button for 6---10 seconds, the interface will appear in winter, mostly caused by too cold can not be turned on or automatically shut down, at this time we use our hands or other methods that can heat up the phone, After heating up slightly, press and hold the Apple button and the power button for 6---10 seconds, and the interface will appear to turn on.

This can be charged to try to see if it can be turned on, if it can't be turned on, you can only bring the phone to the iphone after-sales service for repair.

Under normal circumstances, when pressing the boot button, the voltage at the trigger end of the boot button should change significantly, if there is no change, it is generally due to the poor contact of the boot button or the broken boot wire, virtual welding and damage of the component.

There are many reasons why it can't be turned on, it may be excessive battery wear, or it may be a malfunction of the mobile phone, take it to the mobile phone store to test it!

Reasons why iPhone6s won't turn on:

In general, it may be due to the batteryRunning out of power, resulting in the inability to turn on. If this is the case that we can't turn on, please connect the phone to the power first, if you see a charging sign on the screen at this time, and the battery is very low, it means that the battery is dead.

Some friends think that when they are connected to the power supply and charging, they can turn on normally. In fact, if you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before turning it on.

If you're sure that your phone's battery is sufficient, but it doesn't turn on properly, it may beThere is a problem with the phone's software system. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

iPhone reboot tips:

1. Check if the battery is running out, if this is the case, connect the phone to the power supply to charge.

It should be noted that even after being connected to the power supply and charging, it will take a few minutes to turn on, and it will be able to turn on normally when it is charged to 5%.

2. Press the Home button and hold it for 6-8 seconds to exit any program that can get stuck on your iPhone.

3. Try to press and hold the power on and off button, if it can be restarted, this is the best.

4. If that doesn't work, try pressing the home and hibernation wake buttons at the same time, and hold it for about 10 seconds to force the shutdown!

5. If the above methods don't work, you can try to connect to the PC and use the [Restart] function in PP Assistant, iTools and other tools.

6. For the problem that iphone6s cannot be turned on, we can also solve it by restoring the system through Aisi assistant.

7. Of course, the iphone6s can't be turned on, and it can't be ruled out that it is the cause of hardware failure, so you need to find Apple after-sales service to overhaul the machine.

There are two main phenomena of iPhone not turning on, which are explained here.

1. White apples.

The so-called white apple refers to the screen of the mobile phone that stays with the white apple after a shutdown or malfunction restart, which mostly occurs on machines that have been jailbroken.

First of all, you need to check whether it is a hard injury. For example, the phone has been dropped from a height or dropped into water before the phone suddenly turns white. In this case, please go to the repair station immediately for repair service, otherwise it may not be repaired due to the power on for a long time.

If there is no hard injury, it is the phone that suddenly appears white apples during use and then never turns on, at this time, you can usually do a recovery to solve the problem.

2. There is no display on the screen.

1. This situation mostly occurs in the case of hard injuries, and the most common occurrence is falling into water. Since the iPhone can't unplug the battery, the phone will always be powered on after water gets in. It can only be sent to a repair station for repair.

2. It is also possible that there is no display when the jailbreak fails, please plug your phone into the computer to see if there are any prompts.

Situation 1: If the message is not recognized, and it is still not recognized after replacing the data cable, the motherboard is faulty and usually cannot be repaired by iTunes.

Scenario 2: A debug device that is identified as DFU mode is prompted. In this case, press and hold the home button and the power button, and it will usually turn on automatically to enter the recovery mode after a period of time. Use a small umbrella to exit the mode.

What should I do if my iPhone won't turn on?

Method 1: Press and hold the home and power buttons at the same time for 10 seconds, if you see the apple is too slow, you have to start again, then release the power button and continue to press and hold home for 5 seconds, if you see connect to iTunes, it is a failure, and you have to start again. If the screen does not light up after these 2 steps, it will enter DFU mode, and then you can use iTunes or other flashing software to restore or re-flash the computer.

Method 2: If method 1 is invalid, you can try to connect to the computer, the first step is to use the "restart" function in PP assistant, itools and other tools, if it is successful, congratulations, if it is not successful, you can proceed to the next step.

Method 3: Flash! You can restore the firmware through an assistant or an official one.

There are many situations in which the machine cannot be turned on, and it is only known by testing. You can charge it first to see if it is out of power, if not, you have to go to a mobile phone repair shop to test it.

The battery is faulty, and the iphone6s won't turn on.