What to do if your iPhone6s phone can t connect to the wifi network

1. If the mobile phone is not connected to other wifi, there may be software or hardware failures in the mobile phone, you can reset the mobile phone to the factory state to rule it out, or the mobile phone after-sales service center professionals will conduct a comprehensive test of the mobile phone software and hardware;

2. If the mobile phone is just a wifi can't be connected, it is recommended to use the following methods to troubleshoot:

1) If there is a software error in the operation of the mobile phone, cat and wifi router, it is recommended to power off the mobile phone, cat and wifi router and restart it.

2) Check whether the heat dissipation and ventilation of the WiFi router are normal, and avoid the unstable operation of the WiFi router caused by higher temperatures, so that the mobile phone cannot be connected;

3) Reduce the distance and physical obstacles between the mobile phone and the WiFi router to ensure good WiFi signal coverage quality;

4) Check whether there are too many people connected to the wifi or are watching, playing, or files, resulting in the heavy load on the wifi router hardware and the inability to respond to your network requests;

5) Check whether there is a strong source of radio interference around the mobile phone and wifi router, which affects the quality of wifi signal transmission between the mobile phone and the wifi router;

6) Some older mobile phones do not support Chinese SSID (wifi name) well, it is recommended to set the wifi name to English, save the settings, and restart the wifi router to try.

7) Check whether the WiFi router configuration restricts the network connection of the mobile phone or the WiFi router system firmware version is too old, and there is poor compatibility with the mobile phone, it is recommended to upgrade the WiFi router system firmware to the official latest version to try.

8) Take other mobile phones to test whether the wifi router can be connected, if it can't be connected, there may be software or hardware failures in the wifi router, you can reset the wifi router to the factory state to eliminate it, if it still fails to solve the fault, it is recommended to replace the wifi router.

There must be a wifi signal nearby, and it is not encrypted. It has nothing to do with the operator. The most important thing is that your phone must have WLAN capability.

2. Then open the interface and turn on the wireless LAN, and after searching for the available wifi wireless network, click the name of the wifi that needs to be connected to connect. If the wifi has a password, you need to enter the wifi password for security verification to connect to the Internet, as shown in the figure.

3. If the password is entered correctly, you can successfully connect to the wifi. It's OK to surf the Internet, if you don't know the password, you definitely can't access the Internet.

The first step is to confirm whether the network is connected to the network. You can see if other devices can access the Internet normally; If everyone can't access the Internet normally; It may be due to payment arrears, network problems, etc. Generally, the service provider can be contacted;

In the case of network connection, it is possible to connect to wifi in the following ways:

1. Restart the router, the wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes;

2. The mobile phone wifi is stuck in a dead loop, press and hold the name of the connected wifi in the wireless settings; Delete this wifi to reconnect;

3. Go to the wireless settings to restore the network settings! Reconnect to the wireless can be Note: None of the above may be a hardware failure of the mobile phone, only contact after-sales.

Check if other devices connected to Wi-Fi can connect to the Internet?

Possible reasons and solutions for Apple mobile phone not connecting to wifi network:

1.First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

1. If the mobile phone is not connected to other wifi, there may be software or hardware failures in the mobile phone, you can reset the mobile phone to the factory state to rule it out, or the mobile phone after-sales service center professionals will conduct a comprehensive test of the mobile phone software and hardware;

2. If the mobile phone is just a wifi can't be connected, it is recommended to use the following methods to troubleshoot:

1) If there is a software error in the operation of the mobile phone, cat and wifi router, it is recommended to power off the mobile phone, cat and wifi router and restart it.

2) Check whether the heat dissipation and ventilation of the WiFi router are normal, and avoid the unstable operation of the WiFi router caused by higher temperatures, so that the mobile phone cannot be connected;

3) Reduce the distance and physical obstacles between the mobile phone and the WiFi router to ensure good WiFi signal coverage quality;

4) Check whether there are too many people connected to the wifi or are watching, playing, or files, resulting in the heavy load on the wifi router hardware and the inability to respond to your network requests;

5) Check whether there is a strong source of radio interference around the mobile phone and wifi router, which affects the quality of wifi signal transmission between the mobile phone and the wifi router;

6) Some older mobile phones do not support Chinese SSID (wifi name) well, it is recommended to set the orange name to English, save the settings, and restart the wifi router to try.

7) Check whether the WiFi router configuration restricts the network connection of the mobile phone or the firmware version of the WiFi router roundbranch system is too old, and there is poor compatibility with the mobile phone, it is recommended to upgrade the WiFi router system firmware to the official latest version to try.

8) Take other mobile phones to test whether the wifi router can be connected, if it can't be connected, there may be a software or hardware failure in the wifi router, you can reset the wifi router to the factory state to rule it out, if the nuclear noise still fails to solve the fault, it is recommended to replace the wifi router.

The solution to the Apple 6S not connecting to wireless wifi is as follows:

1. Erase the previous WiFi settings, click Settings - WiFi, and then click the blue arrow on the right side of the WiFi access point.

2. Tap Forget this network, then go back to the home screen and restart your phone.

3. After restarting the phone, enter the wifi settings to find your own wifi access point, and connect to the network after making relevant settings.

1. If the router does not set a password and is automatically connected to the Internet, there is no need to manually set a static IP address.

, then directly click on the wifi access point to access the Internet. If you have a password, you can enter the password.

2. If it is a special router that needs to enter a static IP address to connect to the Internet, you need to enter the static mode of IP address and enter the static IP address and subnet mask.

Router, DNS, and then go back to the wifi access point and enter the password, you can connect to the wifi normally.

Forget about the network and restart your phone. Turn on the Wi-Fi again, enter the password and reconnect to the network.