Where is the best place to install an exhaust fan in the kitchen?

KitchenThe best place for the exhaust fan of the room is the closest position to the range hood. For Chinese, the kitchen is the place with the largest oil smoke, because we Chinese often focus on stir-frying, so a lot of smoke will be produced in the stir-fry process, which is not very good for our body, and it is not very good for our overall home environment, so when we choose the kitchen and decoration, we must choose a high-power range hood, plus an exhaust fan, and it is best to have a window.

Especially nowadays, many young people are willing to choose an open kitchen, although the open kitchen is beautiful and fashionable, but it is easy to cause oil smoke to run into the house。This will give our house a very old light after a long time, and it is not very good for us to run into the house for a long time. So if your home is to be decorated as an open kitchen, first of all, you must install an exhaust hood, and it is high-power, and then you must install an exhaust fan, because the effect of two at the same time will be better.

For friends who want to install an open kitchen, it is best to have a window in the kitchen, I suggest that you can try to install it, an open kitchen。If that's not the case, try to choose a closed kitchen, why? Because the closed kitchen is not easy to run smoke, and the requirements for these equipment in our kitchen are not so high.

Therefore, if you can choose a closed kitchen as much as possible, choose a closed kitchen.

But if we particularly like open kitchens, then we must keep our kitchens clean and tidy. The most important point is to determine according to the area of our home, whether we are more adequate according to the number of exhaust fans. Because sometimes if the kitchen area is relatively large, it is not enough to install an exhaust fan.

Therefore, it is recommended that before decoration, you must grasp the position of the exhaust fan and the sewage hood, and you can install a few more if you have the conditions, so that it is the safest.

It is best to install the exhaust fan in the kitchen near the window, because it will be more effective to exhaust the air in this way.

The range hood should be pressed in a place where the smoke is relatively large, a little higher.

It should be installed in a place with dense oil smoke or on a wall close to a window.

It usually seems to be not far from the window, and it is not far from the place where the fumes are exhausted, so it's about the same.

It should be installed far away from the window so that it does not feed back into the room as much as possible.

Put the exhaust fan on the side, I think so. But there is no installation at home.

It is best to install it in a place where there is a lot of oil smoke and gas, so that it can be used for large capacity exhaust and oil smoke.

If you are cooking in the kitchen, you need to install an exhaust fan. So how is the kitchen exhaust fan installed? PChouse will take you to find out.

1. If you need to fix it on the wall, you must remember to punch holes first, and then make a frame of the same size and embed this frame into it. Next, install the exhaust fan, fix it on the frame, and finally connect the power supply and you can use it. Generally, the installation height should be controlled at about 230 cm, and it should be as far away from the fire source as possible.

2. If it is installed on the window, it is relatively simple, you can directly remove the mask, and then fix the shell to the frame of the window. After installing the foreign currency, check whether there is any debris in the exhaust fan, and then turn the fan blades by hand to see if it can be smoothed and avoid rubbing.

After installation, it can be used normally, because the kitchen smoke is relatively large, so remember to clean the exhaust fan regularly, so as to keep it clean, you can use a rag dipped in soapy water to wipe, the cleaning effect is a good one. After using it for a long time, the fan blades may also appear to be stuck, so you need to apply some engine oil every two months, and these two points need to be paid attention to.

When the kitchen is shaking, the smell of oil smoke is too strong to be unbearable, so you need to install an exhaust fan in the kitchen to ventilate, so how to install a kitchen exhaust fan? Below I will bring you the common sense of kitchen exhaust fan installation: what are the installation steps of exhaust fan shelter rental?

The main function of the kitchen exhaust fan is to drive the fan blades to rotate and rotate by the motor, to exhaust the indoor air to the outside of the household, and then fill the fresh air into the room to play a role in air replacement. So what are the exhaust fan installation steps?

Exhaust Fan Installation Steps:

1. The installation of the ventilation fan must be reliable and firm, and the distance between the ventilation fan and the ground is more than one meter.

2. The distance between the ventilation fan and the exhaust fan and the roof must be more than 5 cm.

3. Remember that the ceiling ventilation fan should not be installed in a place with a lot of oil smoke and dust, and should be away from a high temperature source.

4. The wall ventilation fan with fan can not only ventilate in various places, but also be used for extraction fumes.

5. Remind everyone that when using the socket for power supply, the power cord of the ventilation fan should be matched with a plug that meets the safety standards.

6. The yellow and green two-color wires in the power cord of the exhaust fan must be grounded.

7. The power supply of the exhaust fan and the ventilation fan should be connected to the all-pole switch as much as possible.

8. The lonon ventilation fan reminds everyone to avoid the backflow of gas through the open airway and other pyrotechnic equipment channels.

9. Do not bend the pipe into a V-shape, bell-shaped and other shapes to obstruct air circulation.

10. An air intake hole must be opened indoors to ensure the entry of fresh air, and inspection holes are also required at the top of the ceiling. The room must have air intakes other than ventilation fans to ensure that fresh air enters.

11. Do not pour water on the body during the operation of the ventilation fan exhaust fan, and the power supply must be cut off when cleaning.

What are the steps to install a kitchen exhaust fan, and how to install an exhaust fan have you learned? If you have an exhaust fan to install in your house, try it the way I did.

Kitchen fumes have always bothered many people, so many families will choose to install a high-power exhaust fan to improve the air in the kitchen. Some people will definitely be curious about how to install the kitchen exhaust fan, so let's share the kitchen with youExhaust fan installationMethod.

Check the kitchen exhaust fan before installation

Before installing the exhaust fan, check the exhaust fan to see whether the fan of the exhaust fan is intact and undamaged, whether the fasteners and bolts of the exhaust fan are loose or fall off, and whether the impeller hood has no collision. Carefully check whether the fan blades or louvers are deformed or damaged during transportation; When installing and selecting the environment of the air outlet, it should be noted that there should not be too many obstacles on the opposite side of the air outlet.

When installing a kitchen exhaust fan

The installation is stable, the horizontal position of the fan should be paid attention to when the fan is installed, adjusted to the level of the fan and the foundation plane is stable, and the motor should not be tilted after installation; When installing the fan, the adjusting bolt of the motor should be in a position that is convenient for operation, so as to facilitate the adjustment of the belt tightness when it is used; When installing the fan bracket, it is necessary to make the bracket and the foundation plane horizontal and stable, and install an angle iron next to the fan for reinforcement if necessary; After the fan is installed, it is necessary to check the sealing and searching properties around it. If there is a gap, it can be sealed with a sunlight plate or glass glue.

The kitchen exhaust fan is installed

After the installation is completed, check whether there are any tools and sundries left inside the fan, and use your hand or lever to dial the fan blades to check whether there is too tight or rubbing, and whether there is any abnormal phenomenon that hinders the rotation of the goods, and then the test operation can be carried out; If there is any abnormal sound of rubber fan vibration or "hum" of the motor or other abnormal phenomena during operation, it should be stopped for inspection, and then turned on after repair.

Looked at the aboveHome Improvement NetworkThe shared installation method of the kitchen exhaust fan, how to install the kitchen exhaust fan, I believe everyone has the answer.

The kitchen is a place with a lot of fumes, but some people think that as long as a range hood is installed, it is fine, and there is no need to install itExhaust fanSo, is it necessary to install an exhaust fan in the kitchen? How to install a kitchen exhaust fan? The next thing is to introduce the content of the kitchen exhaust fan.

Is it necessary to install a kitchen exhaust fan?

1. The kitchen fan can solve the role of high temperature, stuffiness, ventilation, ventilation and odor removal in the kitchen, and play a role in the circulation of fresh air inside and outside the kitchen.

2. The kitchen exhaust fan is cheap, has a large air volume, high efficiency, and sufficient exhaust strength, which can play a decisive role when the range hood is not strong enough; No matter how good the range hood is, it can not completely remove the oil smoke in the kitchen, and after a long time, it will also cause the accumulation of oil smoke on the range hood, which is not beautiful and affects the work efficiency of the range hood.

3. Constant temperature, especially in the hot summer, when cooking, the kitchen exhaust fan can quickly discharge the stuffy air indoors, suck the air on the other side of the outdoor into the room, and reach the same temperature as the outside temperature, so that the temperature in the kitchen will not rise, take away the heat of the human body, and make people feel cool.

How to install a kitchen exhaust fan:

1. Prepare before the installation of the exhaust fan

Before installing the kitchen exhaust fan, carefully check whether the machine is intact, whether the fasteners and bolts are loose or falling, whether the impeller is bumped, and carefully check whether the fan blades or louvers are deformed and damaged during transportation. When selecting the environment of the air outlet, it should be noted that there should not be too many obstacles on the opposite side of the air outlet.

2. The exhaust fan is being installed

The installation is stable, and the horizontal orientation of the fan should be paid attention to when installing the kitchen exhaust fan, and the level of the fan should be adjusted to be consistent with the foundation plane. After the ventilation fan is installed, there must be no skewed appearance. When installing the kitchen exhaust fan, the conditioning bolts of the motor should be in a convenient position for operation, so that the ventilation fan belt can be tightened when in use.

When installing the kitchen exhaust fan bracket, be sure to make the bracket consistent with the foundation plane, if necessary, install an angle iron next to the ventilation fan for re-reinforcement, and after the fan is installed, check the sealing around it. If there is open space, it can be sealed with a sun panel or glass glue.

3. The installation of the exhaust fan is completed

After installation, check whether there are any things and debris left inside the ventilation fan, move the fan blades with your hand or lever to see if there is too tight or rubbing the appearance, whether there is no abnormal appearance of the items that hinder the transformation, before you can carry out the trial work.

All about the kitchen exhaust fan, home improvement network is introduced to you here.

Due to the smell of kitchen fumes, it is generally necessary to install exhaust fans. So how to install a kitchen exhaust fan? PChouse will take you to find out.

1) If there is a wall hole, you need to make a frame with the same size as the exhaust fan to embed it, remove its surface frame, and the box shell needs to be fixed on the wooden frame, decorate the surface frame, and turn on the electricity. Here is a reminder that the installation height should be about meters, and it cannot be directly installed in the position where the fire source can burn.

2) If it is installed on the window, remove the surface frame directly and fix the box shell directly on the window frame.

3) About 2 months or so, you need to drip oil into the front and back of the motor, and the fan blades and fan frame should be cleaned regularly, and you can scrub it with a cloth dipped in soapy water first.