How to install two wall mounted air conditioners in one air conditioner

It is possible to purchase a set of one-in-two air conditioning units.

It is necessary to be two adjacent rooms, because the two indoor units share the same outdoor unit, and the connecting pipes of the two indoor units are connected to the same outdoor unit at the same time when the connecting pipe is installed, if the two rooms are not adjacent, but far away, a longer connecting pipe is needed to connect with the outdoor unit, so it is easy to cause the refrigeration effect to be bad, increase the difficulty of installation, and is not economical.

The size of the room is not very large. Although at present, major brands have their own one-to-two products, but the product range is limited, the general cooling capacity is between 2000w and 3200w, if the room area is outside the cooling range of the air conditioner, it will not achieve the expected cooling effect.

The difference in the size of the rooms is not very big. One-to-two air conditioners generally use two systems with the same cooling capacity or systems with a small difference in cooling capacity, which requires the same room area or a difference of several square meters.

Split wall-mounted air conditioner, tap in charge of tapping, second-hand air conditioner that can be installed by someone. I have such a store, see if you have it, one machine and two rooms have a low cost, more energy-saving, the most important thing is to find the joint in charge of easy to solve.

Now there is no one-to-two split air conditioner on the market, that is, the so-called outdoor unit before, with two indoor units, however, it is now gone, so it is recommended that you install an air conditioner in one room, because my family is also two bedrooms side by side, but the outdoor unit is installed together, one on and one down, up and down side by side installation OK.

It is possible to purchase a set of one-in-two air conditioning units.

Method: 1. We first prepare a hanging air conditioner to be used, check whether the functions are complete, whether the switch is stable, the most important thing is to clean the air conditioner, and after the inspection, you can measure the size of the air conditioner (shouting to take the accurate size);

2. Then dig a boxy hole at the top of the wall that is about to be shared, don't dig too big at the beginning of the jujube rent, first dig a small position (similar to a fist-sized hole);

3. Expand and correct the hole according to the size of the air conditioner, so that the hole is larger than the size of the air conditioner, not smaller than the size of the air conditioner.

4. Then install the air conditioner according to the convention, and pass the air conditioner through this hole, half of each room;

5. This is the other half of the air conditioner in another room, and after it is turned on, two adjacent rooms can share a hanging space.

To realize the sharing of two rooms with a hanging air conditioner, the following methods can be considered: 1Installing the duct system:

Installing an air duct at the air outlet of the hanging air conditioner and extending the air duct to another room can realize that two rooms can share an air conditioner. 2.Installation of split system air conditioners:

Replace the hanging air conditioner with a split air conditioner, install the outdoor attendant machine and the indoor unit in two rooms respectively, and connect them through pipes, so that the two rooms can share an air conditioner. 3.Install a multi-split air conditioner:

Multi-unit air conditioners can be connected to multiple indoor units and one outdoor unit, and two rooms can be cooled or heated by one outdoor unit. It should be noted that the above methods need to be considered when installing the air conditioner, if the hanging air conditioner has been installed, if you want to share the two rooms, you need to reinstall or replace the air conditioner. At the same time, it is necessary to choose the right type and power of air conditioner according to the room area and usage needs.

If you want a hanging air conditioner with two rooms shared, you can consider the following two options:

Installation of air duct system: Through the installation of air duct system, the cold and hot air of the air conditioner are transported to the two rooms through the pipe to achieve sharing. This solution needs to reserve the installation position of the air conditioning duct, and at the same time need to consider the length of the air duct, ventilation effect, noise and other issues.

Installation of split air conditioner: To install a split air conditioner, Qi Jianrang installed the outdoor unit outdoors, and the indoor unit was installed in one of the two rooms, and the two rooms were connected through copper pipes or cables to achieve sharing. This solution needs to take into account the length of the pipe, the location of the installation and reinstallation, the specification of the copper pipe, the safety of the cable, etc.

It should be noted that no matter which scheme is adopted, sufficient measurement and design need to be carried out before installation to ensure that the cooling and heating effects of the air conditioner meet the requirements, and the maintenance and maintenance of the air conditioner need to be taken into account to ensure the service life and effect of the air conditioner. If you are not sure how to install it, it is recommended to ask a professional air conditioner installation company to install it.

The easiest way to share two rooms with a hanging air conditioner is to use the air supply duct to break up the diversion. The specific steps are as follows:

1.Install the air supply outlet diverter: connect the air supply outlet of the hanging air conditioner to the air inlet of the air supply pipe diverter, and then connect the two air outlets of the shunt to the air inlet in the two rooms respectively.

2.Install the air inlet valve: Install a valve on the air inlet in each room so that the air conditioner can be turned on or off at any time.

3.Install the air supply duct and connector: According to the actual situation, select the appropriate air supply duct and connector, and then connect the air supply duct to the air outlet of the diverter and the room air inlet.

It should be noted that in order to ensure air circulation, the length of the air supply duct should be controlled within a certain range. At the same time, due to the different sizes of the two rooms, the use of the same air conditioner may need to be adjusted according to the actual size and usage of the room to ensure air circulation and comfortable temperature.

For household wall-mounted air conditioners or cabinet air conditioners, it is almost impossible to achieve the ideal state of "one air conditioning tube for two rooms". If you want to use it in this way, you can only open the door of the room and place a fan between the two rooms to help the air flow between the two rooms. For the air duct air conditioning unit, it can be achieved by sending air to two rooms separately and returning air from the two rooms at the same time.

The two air conditioner units can be stacked on top of each other, because the air conditioner units are ventilated from the back to the front, as long as they do not block the air inlet circulation behind them.

According to the installation specifications of the air conditioner unit, it is best not to stack two air conditioner units on top of each other, because:

1. The upper and lower parts need to be separated by a certain distance, otherwise it is not easy to maintain the air conditioner when it is broken.

2. The external machine will vibrate, and the interaction between the two units may resonate, and the frame of the external unit is not designed to bear the load, so the two air conditioners may be overloaded.

OK. The air conditioner can be installed with only one outdoor unit and two indoor units.

Note: 1. The premise is that your air conditioner needs to be more than one air conditioner.

2. Two air conditioners must be turned on at the same time, which does not save electricity and energy.

3. If there is a problem with one part, basically the whole family cannot use it.

4. Two hang-ups take up a lot of space.

Two air conditioner outdoor units can be hung together.

The premise is that the air outlet and return air of the two outdoor units cannot affect each other.

For example, two outdoor units are like queuing, one in front of the other is not allowed;The two outdoor units are back to back, and the distance between them is too small

Two outdoor units can be installed "face to face", and the middle distance is less than 2 meters.

It is possible to install it side-by-side or up and down.

Theoretically, no, in fact, it doesn't matter, because some large air conditioners also have double blades up and down, so as long as the ventilation and heat dissipation are good.

No, for the following reasons:

1. The noise is loud, and the upper and lower stacks cause resonance;

2. When heating in winter, there will be defrosting water outside, and the water above will flow to the machine below, resulting in poor heating effect of the machine below and an increase in power consumption.

If you have to stack them, put a water guide tray between the 2 machines to divert the water from top to another place.

For the time being, it is okay when the air conditioner is good, then what should you do next time you repair the air conditioner below, it is recommended that you make a frame, so that there is a 10 cm distance between them, which is convenient for maintenance.

Each row does not affect each other, of course.

According to the installation specifications of the air conditioner unit, it is best not to stack the two air conditioner units together, because the top and bottom need to be separated by a certain distance, otherwise the air conditioner will not be easy to maintain when it is broken. In addition, the external machine will vibrate, and the interaction between the two phases may resonate, and there are some electric Lingzi sub-components on the fuselage of the external machine, which may cause the electronic components to be squeezed and damaged if stacked together.

It is best not to stack, it is not safe, the external machine will produce vibration when working, and stacking will easily lead to dislocation up and down, falling off.