How to check whether the computer has UG software or residual patches

Compatible with win7 is very poor.,Don't mention the display.。

Let's try the next "UG One-click Installation" first.

Method steps.

1 3 Step by Step Reading.

1.You first check whether the computer name in your LIC file has been changed correctly, and whether this was selected when installing;

2.In addition, the things in the tuning lmtools, the specific tuning method is searched for a lot.

3.See if your cracked file is pasted in the past. If it doesn't work, then find someone in the group to help you see what's going on remotely.

UG appears This application is unable to connect with the NX FlexLM license server.

This problem is to explain that the UG license core file is forced to close. For example, when you use online banking, you will be prompted to turn it off, this is the UG license program, after closing, this warning will appear after a while. The solution is to restart the license after exiting the online banking, or log out of the computer to solve the problem.

NX requires the Server ID feature to be included in the license file.

Before I solve this problem, let me ask you: Have your cracked files been replaced? This problem,Is your ug not cracked,Go and crack the main program first and then look at the following!

Save some time for beginners. Problem explanation: The license is correct, but it is not connected to the UG main program.

So this error occurs. This is an old problem, and a patch has been released recently. Many brothers say that they can't open it after upgrading.,There will be an alarm for the above permission.,In fact, brothers who often play ug know.,Sometimes you have to crack the program again after the patch.,Because the patch is official.,Cover the crack of your reason.,Naturally, it can't be opened.。

First: Check that your computer name has not been changed, if you have changed it, please change the computer name in the license as well

Second, check that your environment variable is the correct computer name.

Third: Re-fix the license installation. If nx still doesn't work, a reboot of the computer should be fine.

After the system is reinstalled, the ug needs to be reinstalled before it can be used, and it can be usedug one-click installation toolInstallation, with installation package or one-click installation software, easy to operate.

Because UG software is a relatively large mechanical design software, and in order to make the interface of UG software have an excellent display effect, there are still certain requirements for the configuration of the computer. Since the software is constantly being updated, we will explain the configuration requirements of the highest version.

1. First of all, it must be a discrete graphics card, and it is recommended to use a graphics card with a height of 512MB or more.

2. The CPU frequency is above.

3. The minimum memory is 1GB, and it is recommended to use 2GB or more memory.

4. Since the current computer hard disks are almost hundreds of GB, they can meet the needs of UG.

Ask what configuration of laptop can install mechanical drawing software such as ug and soldwork.

Can you specifically recommend that computer?

Lenovo IdeaPad 300-15ISK

Lenovo Y40-70P

Dell (Dell) Inch Notebook Inspiron 15U-3528 Hello, thank you.

This doesn't have to be very high-end, 3000 computers run like ug, if you want to buy a long-term one, it is recommended to buy a ThinkPad T series computer, this is very good, it is recommended to buy a hard disk with a solid state plus mechanical hard disk, and the data must be stored in the mechanical hard disk part.

UG This is a three-dimensional software, mainly the mold setting toolpath is more troublesome, so this computer configuration is a little higher, and I don't recommend you to buy a notebook, if you use a notebook this computer must be i7, if you have your own computer then seven or eight thousand This computer configuration is very high, you can use i59400 CPU, two times 16G memory, 250G + 1T hard disk, RTX 2060 graphics card, and then on a Great Wall 500 yuan power supply.

CPU requirements: more than three generations of Pentium.

Memory requirements: 512MB or more.

Note: NX11 0 and later versions have special requirements for CPUs and must support SSE3

This configuration is a computer configuration from 10 years ago. As long as it is not lower than this type of computer, you can install UG software. In fact, in general, the configuration of a home computer is operational.

Some companies only draw a few simple graphics for UG software. According to the hardware products currently on the market, they can be matched at will. Never mind.

If we think that NX software has any requirements for computer hardware, it's the graphics card. NX software (the same as the other software) is developed on the basis of a professional benchmark graphics card.

Most people buy gaming graphics cards, Nvidia's GT GTX series, ATI's HD series. Obviously, these graphics cards are not suitable for drawing, but the average PC doesn't matter, because at least it's generally compatible, but it doesn't work as it should.

1. First of all, it must be a discrete graphics card, and it is recommended to use a graphics card of more than 256MB.

2. The CPU frequency is above.

3. The minimum memory is 512MB, and it is recommended to use 1GB or larger memory.

4. The minimum space of the hard disk is 4GB, and it is recommended to use the hard disk with 8MB cache.

solidworks: 1 GB of RAM can run, normal, assembly parts are not more than 50, no matter how large the assembly may be, it may be slow. If you're rendering a version**, 2G is too small.

UG is an industrial design software, the better the computer configuration, the faster the speed of running when designing graphics, UG software has no minimum requirements for the configuration of the computer, in other words, the computer can be installed with UG software, can be installed with UG software but does not mean that UG software can be used quickly;

1. I use UG for design, and the configuration of my computer is as follows:

2. The UG software installed on my computer is:

3. According to my above computer configuration, you can easily use UG software to draw graphics;

The current configuration is basically no problem, and the notebook that my master bought 7 or 8 years ago 3Q is still running.

It's just that the memory is larger.

If you want to run smoothly, it is best to have a separate display and a high memory.

Support system: XP Win7 Win8 Win10

Fully automatic installation software with ug one-click, automatic installation, automatic activation.

Because it is a three-dimensional software, it has high requirements for the graphics card and CPU of the computer.

Go and search the Internet for yourself.,There are n more tutorials in this area.,A little research will be.。