SAI does not sense the tablet

Kindness.. It is recommended that the landlord reinstall WindowsBecause I'm worried about driving conflict. If it doesn't work, you can consider replacing the board or repairing it.

I still think it's a driver issue. Or there is something wrong with the SAI program itself.

Obviously,There's no problem with the board.,If there's a problem with the board.,There's no induction in other drawing software.,It's recommended that you change to a sai version.,Some of the versions on the Internet do have problems.,I couldn't draw the next one last time.,Bamboo 650 with it.,Then it's good to find a new one.,Or you see if the adjustment board is selected white.,I started to make this kind of mistake.,Hehe.。

If other software is good to use, see if the minimum diameter of the nib of sai is not made to 0

Conflicting failures. 1.Reload the board drive.

2.Reload SAI

This is probably a problem with the pen of the pen tablet. You reinstall the battery and see if it's a problem with the battery, I often have this situation, if it doesn't work, then hi me!

Happy landlord!

The board of the art realm is really good.,I didn't find your problem.,Try a different version.,Hehe.。

Well, the version problem, I've had it before, it's OK to change the version.

Try it to see if there is pressure sensitivity with ps. If there is none, then there is something wrong with the board...

Hello try.

Bai put the drive.

After DU completely uninstalls zhi, try to reinstall the tablet driver again.

The board has a pressure sensitivity in the PS, which means that the driver has been installed and can be used normally.

In this case, one could be a problem with the software, and the other could be a problem with some aspect of the settings.

After you open the pen pressure setting of the pen tablet, you can't even move the mouse in SAI? I've never encountered this situation.

Try turning off [Tablet Support] in the settings of the tablet. The official pen tablet instruction manual has a hint that if you open this, it may cause some problems.

Another is about the setting of the brush, if the minimum diameter is set to 100%, there is no pressure sensitivity, and if the brush does not have the [Pen Pressure Control] option turned on, then there is no pressure sensitivity.

Then there is the problem of the software itself. If it doesn't work,You try my sai to see if it works.,This exe installation package can be used directly right-click to unzip it.。 Take a look.

You try the above method first and check if it is the best problem.

Usually the pen tablet has no pen pressure on the sai, and there are the following points:

1. The tablet is damaged.

2. The sai program is corrupted.

3. Improper adjustment of sai.

The third solution method: open the sai, there is a "other" in the upper right corner, press "select" and there is a "pen tablet" on the top of the "nucleus".

Adjust the minimum pen pressure of the checkout click to 0, and you're good to go.

PC restart? If it still doesn't work, reinstall the driver.

If you want to learn systematically, you can consider signing up for a live online class, and recommend CGWANG's online class. The teacher speaks carefully, you can watch it back after the class, and there are also the same type of recorded classes that you can learn for free (give away lifelong VIP).

zdhhr-11y17r-1868601381508313427

The hand-drawn tablet I bought back has a manual.,Different hand-drawn tablets may be different.,After installing the driver.,Just open the sai directly.。

The first step is to install the tablet driver.

There is a driver program disk in the pen tablet box, and the program must be installed into the computer first.

The second step is to connect the pen tablet.

Take out the cable of the tablet, plug one end into the computer, and plug the other end into the tablet to complete the connection of the tablet.

The third step is to open the tablet's properties program.

The first thing to do is to open the tablet's properties program, where you'll see a lot of settings.

The fourth step is to adjust the relevant values of the pen tablet.

In the attributes, you need to adjust the sensitivity and pressure sensitivity of the pen.

Fifth, after the adjustment is completed, you can start drawing.

Open the SAI software, and you can use the pen tablet to draw on the SAI as if you were drawing on a blank piece of paper.

If you don't have a pen tablet and want to learn to draw, it can be taken as an interest, if you buy a pen tablet, then learn a look, because a decent pen tablet is not cheap, since you have a pen tablet to learn a look, you can make money through pen tablet painting, you can take orders online, so I hope you not only have a pen tablet, but also learn to draw the original picture through the pen tablet, like the problem of connecting the sai software with the pen tablet, and the problem of no pressure sensitivity, these are small problems, It's easy to solve, everyone on the road of learning painting, not only these problems, but also more problems, it's a waste of time to simply rely on your own exploration, if you really want to improve your painting strength, learn the original painting board painting this piece, you can have time to listen to a painting master's free live class on the Internet at night, he talks about the original drawing board illustration every day, as well as the use of sai and ps software, it is easy to understand, it is easy to understand, and you can let everyone go a lot less problems, If you want to listen to this big touch class, you can enter his original drawing board drawing tutorial material skirt: the first set of numbers in the front position is: 239, and the second set of numbers in the middle is:

869, the last number at the tail is: 377, just arrange the above three groups of numbers in order. When we play painting, we must not only master the relevant software, but also learn to use this software to do a good job in painting and design, which will bring us the improvement of skills and the growth of strength, as well as the harvest of wealth.

Let interest not only be interest, but also make interest earn money for yourself.

1. First determine whether it is a problem with the pen tablet Use it in other software If there is no problem, first eliminate the problem of the pen tablet.

2. In the [Other] [Options] of SAI, adjust the settings of the tablet. Sometimes it's not that the tablet is not easy to use, but that the minimum pen pressure is too large to draw without force.

3. See if you have selected mouse mode instead of pen mode.

4. If it still can't be used, try to reinstall the driver of the pen tablet (PS: When installing the driver, be sure to uninstall the pen tablet driver of other brands first, otherwise it is easy to cause the situation that there is no pressure sensitivity in the sai).

Try setting the strength and inclination of your pen, or you may have a problem with your brush settings.

Hello, this may be a driver problem with your tablet, you can try to reinstall the tablet driver.

InStart Menu - All Programs - Youji Technology - Uninstall the driver

Follow the steps step by step to uninstall the driver of Youji.

After uninstalling, you will be prompted to restart your computer, click [Yes] to restart to enter the official website of Youji.

Enter your board's information, your operating system, and click Search. The tablet drivers for your board and system will be displayed below.

You try it first, I hope it works for you.

Uninstall the driver with this software attachment.

There are instructions on how to do it.

I don't know how to ask again.

Uninstall the current driver, reinstall the latest driver, try it, or try a different computer, and see if it's a problem with the board.

Hello. Please try plugging and unplugging the tablet.

Or try restarting your computer. Check to see if the tablet driver is installed. Try reinstalling the tablet driver.

If necessary, you can consult the official customer service staff, and they will help you solve it.

I'm using a friend base g5 (I used Shadow 08 before),There is no case of you.,Some of my friends are also using EX05.,But it doesn't seem to be your case.。 There have only been cases where the mouse will move in the drawing software, but it will not move as soon as the mouse is removed (and this situation usually occurs after the software forces the process to end).

You try a few of my methods above first, see if it works, I hope it will be useful to you.

Driving problems, Youji often have to re-drive down.

Is there a battery in the pen?。。