How can I speed up my internet speed? I was connected from the landlord Nara

1. To find a landlord, you need to log in to the router, and then log in to the router to check whether the router has a QoS function If there is a flow control, set the upstream traffic and downstream traffic of each user, you can also try to log in without looking for the landlord, enter in the browser or enter the router: admin in the pop-up interface

The password is also admin, if you don't have a password, you can't manage the router, then use the following method.

2. Go online and find some traffic control software, such as: P2P terminator, network law enforcement officer, network scissorhands, Jusheng network management and other control software for network control, and set the uplink and downlink bandwidth!

The best way is to pull a network cable by yourself, the landlord's network cable is used by so many people, how to speed up is slow, now there are more than 600 700 yuan a year, Netcom. Tietong. In the same way, if you use it for a family, it will be very fast, and it will be 50 to 60 yuan a month.

50 yuan a month is such a card, you are hacked by the landlord, 8 people pay 50 per person per month, 400 a month, 4800 a year, the landlord installed the annual fee for broadband? Earn to death, landlords are like this, you rent a house and can't satisfy him, he will also knock you on the utility bill and Internet bill, and my landlord will pretend to be the police to extort my deposit.

You might as well install the Great Wall or Aipu's broadband, the Great Wall 6 trillion exclusive a year is only 500 (depending on the region), Aipu's 4 trillion exclusive is only 29 a month, although not as good as Telecom, but at least stronger than you, my telecom 3 trillion exclusive is only 300 higher than you this year

It's hard to solve your problem completely, there is a software called P2P terminator on the Internet that can specifically control the network speed in the local area network, but I believe that other of you will also use it, so that if everyone uses it, not only will the network speed not be fast, but also add a lot of burden to the entire network, and the network speed will be worse. (I can't finish writing and asking).

There's no need to install P2P kind of software.,The first installation of this kind of software will lose its effect if there is a second person who installs it.,The effect of this kind of thing is not very big.,Pull a network cable yourself.,That's a hundred or ten dollars a month.,Or it's more appropriate to find a familiar person to use together.。

Enter the router and look at the username admin password admin as long as you go in, you should be fine.

Let's rebook a new broadband. Seven or eight people basically don't need to do it, and people understand it. When the time comes, it will be said.

Telecom 4m three people use relatively smooth. The two of them were very smooth. It doesn't take 50 yuan to share it among three people.

I don't know your ** Hangzhou's tariff, you look at 4m1580 yuan.

Open, in the setup wizard, let the router automatically select the Internet mode. Then follow the prompts to set it up step by step.

Can you log in to your router? There is a wireless set up in the login, and your network is a local area network, so don't choose to dial.

Preparation: wireless router, 1 network cable, 1 computer.

How to set up wifi:

1. The router is plugged in, and the network cable that enters the home is plugged into the WAN port of the router;

2. Connect the computer and the router with another network cable (plug one end into any LAN port of the router, and plug the other end into the computer);

3. After opening the computer browser, enter the IP of the router in the address bar (there is one in the manual, press enter;

4. Enter the username and password of the router, generally the initial username and password are admin (can be found in the manual).

5. Click "Setup Wizard" and click "Next";

6. Select PPPoE (ADSL Virtual Dialing) and click Next.

7. Enter the Internet account and Internet password (that is, the network user name and password written in the contract of the network and operator), and click "Next";

8. Select "WPA-PSK WPA2-PSK", enter the password and click "Next" (this password is the WiFi password);

9. After the router is set up, click "Finish".

What equipment does the landlord use router?

Presumably, your network cable is also drawn from the landlord's router. In this case, it may be better for your router to be used as a switch. Here's how to connect and set up:

Log in to the router management interface and change the IP address of the router LAN port to avoid conflicts with other devices on the intranet. Turn off the DHCP service of the router.

Connect the introduced network cable to the LAN port of the router. A computer with wired Internet access is connected to a separate LAN port.

Other Wi-Fi settings remain as usual.

The landlord's house is 2m broadband, and there should be a router in the landlord's room, and his router manages the routing settings of several houses. Installing a route at your own home does not affect his routing settings, because it is equivalent to the host and yours is the extension.

There are several ways to pull the speed of the net:

1.Set a relationship with the landlord and give special care.

2.Crack the landlord routing password and set it up (not very ethical. was found not very good) 3

Installing a LAN control software to control the speed of the computer in the LAN on your own computer is not very ethical, and if someone else has installed similar software and the version is higher than yours, your software will not work.

Tell you clearly that it is useless, and the route you installed can only be used as a switch. Those software don't do much, and now antivirus software basically comes with an ARP firewall, which can easily block you. The most practical way is what the friend upstairs said, have a good relationship with the landlord, get the router password, or pull the cable yourself, otherwise there is no way.

No.. With speed limiting software... Such as P2P terminators. But now it's generally restricted by firewalls.

So I can only communicate with the landlord.