I don t recognize the newly added hard disk system, what should I do?

If you can supplement the model of your motherboard, it is best, you say the specific point of the situation, there are two IDE lines in the computer, generally speaking, one is connected to the optical drive, and the other is connected to the hard disk, you can unplug the optical drive first, and insert the new hard disk into the position of the optical drive, then if you want to be able to recognize it, it means that your hard disk "master" and "slave" settings are not set right. The specific method above the brother (grilled onion) has been done,If you don't recognize it, it's true that your motherboard doesn't support it.,In my opinion, it's generally your "master" and "from" not set right.,If not, you can send out your motherboard brand and model.,I'll help you see how to upgrade the BIOS。。。

The new hard disk must be formatted before the system is recognized, hehe.

Yesterday I could, I changed a battery, and today I don't recognize it, right?

Troubleshoot contact issues first.

Unplug the hard drive cable from plugging it in.

If the motherboard is very old, it is not supported by the BIOS, and if it is relatively new, it means that your BIOS and jumper are not set up properly.

The old motherboard will definitely not work, or use the 160g one! This has nothing to do with the battery per charge, upgrading the BIOS can't solve the problem!

It depends on what brand of motherboard you have. Check the official website of the optical drive.

Brush it under DOS.

You can still recognize it yesterday.

Not today. Let's see if it's a compatibility issue.

Old motherboard.

What should I do if I have a new hard drive installed in my computer, but I don't have the new hard drive in Disk Management?

What should I do if I have a new hard drive installed in my computer, but I don't have the new hard drive in Disk Management?

Hello, if the new hard disk has been installed in the computer, but it is not displayed in Disk Management, it may be because the hard disk has not been formatted or partitioned. You can fix this issue by following these steps:1

Open "Disk Management": In Windows system, you can press the Win+X key and then select "Disk Management" to open the disk management tool. 2.

Scan for hardware changes: In the disk Zenfan management interface, click "Actions" in the menu bar and select "Scan for hardware changes", so that the system will re-scan the hardware device. 3.

Initialize the hard drive: If the new hard drive still does not show up after scanning for hardware changes, then you need to initialize the hard drive. On the Disk Management page, right-click the unallocated hard disk space, select Initialize Disk, and follow the prompts.

4.Partition the hard drive: Once you have initialized the hard drive, you need to partition it.

Right-click on the new hard disk space, select "New Simple Volume", and follow the wizard. In addition to the above steps, there are some possible reasons why the new hard drive does not show up in Disk Management, such as hardware connection issues, hail drive issues, etc. If the above steps don't resolve the issue, you can try reconnecting your hardware or updating your drivers.

Where are the unallocated disks.

If a new drive has been installed on your computer but doesn't show up in Disk Management, it may be because the drive hasn't been initialized or isn't assigned a drive letter. You can follow the steps below: Press Win+X and select "Disk Management" to open the Disk Management tool.

Check in Disk Management to see if the sidemacro has an uninitialized hard disk. If so, right-click on the hard drive, select "Reset Disk", select the disk partition type (MBR or GPT), and click "Carrier Book OK". See if there is any unallocated hard disk space in Disk Management.

If so, right-click on the space, select "New Simple Volume", follow the wizard, assign a drive letter and format the drive. If the above steps do not solve the problem, you can try to replug the hard drive data cable and power cable, or replace the data and power cable. In short, if the new hard disk is not displayed in Disk Management, you need to check whether the hard disk has been initialized and assigned a drive letter.

If that doesn't work, try plugging the cable and power cable again. <>

I just don't have this hard drive.

I want to initialize.

Try what I said!

.After booting, the system can't find the hard disk or can't recognize the hard disk After booting up, the system can't recognize the hard disk, the first thing we think of is the hard disk compatibility mode problem, but there is no compatibility problem between the hard disk and the motherboard, so this idea can be ruled out. The main cause of this type of failure is the connection between the hard drive and the motherboard.

Improper settings cause the computer to not recognize the hard disk The BIOS of the motherboard can also set the working modes of the hard disk such as normal, LBA and large, we need to set it according to the situation of the hard disk, otherwise there are likely to be other problems. The solution to this type of situation is not difficult, just press.

3.The hard drive is not recognized due to a problem with the hard disk partition of our computer and the hard drive will be partitioned when it is in use, so that there will be a primary partition.

The hard disk goes to boot to find the first boot.

There could be the following reasons:

1. The power supply is not sufficient, and the power supply power cannot provide high-power transmission to all hardware.

2. The motherboard is older, and the new hard disk exceeds its maximum support capacity, so you can try BIOS to repair it.

3. There is a conflict with the old hard disk, and the individual model of some hard disks must be set as the main disk to be recognized.