Insufficient memory will cause blue frequency not? Will the memory module have a blue screen if the

Dual-core, still with 512 memory?

You're pulling a rickshaw with a car.

Not matched.

Add memory.,512M isn't enough.,Add 1G into it.,I think you can only increase 1G.。 The 512M motherboard only supports a maximum of 2G memory, so let's add 1G to it! Speed will make you fast.

Generally not, it will only slow down, and the reflection will be sluggish, and the blue screen is generally not compatible.

The blue screen doesn't happen for no reason, please tell us more about how your computer behaved in front of the blue screen and what you did. What software, patches, and hardware have been upgraded? Tell me in detail what you did before the blue screen, which may be the occurrence of the blue screen caused by these actions.

3. If there is no blue screen shutdown often, it is okay to turn on the computer, or it doesn't work, please press F8 when you boot up, select "The latest correct configuration" Enter to repair, and restore the system or reinstall the system if it doesn't work.

4. If it is caused by hardware problems, or overclocking CPU and other hardware, it is recommended to plug and unplug the graphics card, memory and other hardware, clean up the hygiene in the computer, and polish the gold finger of the graphics card and memory (test whether the temperature of the hardware is too high).

5. The computer is opened abnormally when the optical drive is being read, which can lead to a blue screen, and the disc can be re-inserted into the optical drive. When the computer is plugged and unplugged in early, it can cause a blue screen, restart the computer to repair it or fix it according to the third item above.

6. There is also whether there is a problem with the hard disk, use the system's built-in function to repair a Zen lead cleaning or ** software to repair the bad sectors of the hard disk, or format the hard disk to repartition and reinstall the system, or it is not possible to change the hard disk.

7. Recently upgraded hardware, these hardware is not compatible with the system, such as: memory, graphics card, etc., please replace the hardware to try (until the place where the hardware is upgraded is replaced).

8. If it is caused by hardware problems, and you can't find the problem, it is recommended to go to the maintenance there for maintenance.

9. Playing a game with a blue screen is generally a problem with the game itself, the configuration of the computer conflicts with the game, the graphics card and graphics card driver are not suitable, the temperature of the CPU and graphics card is too high, and the memory is too small.

There is a lot of blue screen information on computers, but the causes of them are often concentrated in incompatible hardware and drivers, problematic software, viruses, etc., so first of all, we will provide you with some general solutions, and after encountering the blue screen error, you should first rule out these schemes.

1.Reboot. Sometimes it's just a bug in a program or driver that restarts it.

2.New hardware.

First of all, it should be checked that the new hardware is plugged in, a problem that many people overlook often leads to many inexplicable failures. If you confirm that there is no problem, unplug it, try it in a different slot, and install the latest drivers. At the same time, you should also check whether the hardware under the spine is compatible with the operating system against Microsoft's hardware compatibility list.

If your hardware isn't in the table, then get the hardware.

Enter the stop code in the "Search (Knowledge Base)" in the upper left corner, for example: 0x0000001e, and then select "Chinese Knowledge Base" below, if the search results do not have suitable information, you can select "English Knowledge Base" to search again. In general, you'll find a useful solution here.

8.The last mitigation is the correct configuration.

In general, the blue screen appears after updating the hardware driver or adding new hardware and installing its driver, which is the case in Windows

The "last correct configuration" provided by the 2000 XP is a shortcut to the blue screen. Reboot the system, press the F8 key when the boot menu appears and the advanced boot options will appear.

First of all. You only use the memory that you bought with the new congregator code to insert it separately.

See if it starts.

If it can start.

That should be incompatible with the original memory.

If it doesn't start.

Of course, the problem lies in this new memory.

Just go back and change it.

It is recommended that you use the same brand as the original memory.

Same specifications. Infiltrate of the same size.

The chances of such incompatibility are almost non-existent.

If it is not plugged in properly or your memory does not match, cut off the power and reinstall the appropriate memory to boot up.