The vivoy93 phone got into a little water and is it still turned off?

Be sure not to press the power on and off button after the phone gets into the water.

Because water ingress will cause problems on the motherboard, generally if there is less water ingress.

It can be wrapped in toilet paper and exposed to the sun for a period of time.

It will be resolved soon.

Also, if you don't feel at ease, you can spend some money and let my show master help you take a look.

Generally speaking, 90% of mobile phones that are flooded can be repaired as long as you don't press the power on and off button.

This time it's a long experience.

It is estimated that if you repair your mobile phone, it will be more expensive.

Because repairing the motherboard is the most expensive thing.

Quickly throw the water out, and then use the hot air of the hair dryer to blow on the speaker of the charging port of the mobile phone and keep an appropriate distance, and then turn it on after 5 or 10 minutes, or you can go directly to the mobile phone store to find a professional to spend some money to repair.

Don't be in a hurry to turn it on, drain the water of your phone, throw it into the rice bowl for a day or two and then turn it on. If it really doesn't work, I'm afraid I can only take it for repair.

There is a danger of water ingress, you don't have a concept of how much you don't disassemble, the general mobile phone is just splash-proof, if the whole mobile phone is soaked in water, then the degree of water ingress is difficult to say.

It is recommended to find a repairman to disassemble it, and some dishes can continue to be used if they are clean, otherwise it is easy to cause short circuit and damage to the motherboard and cause the phone to be scrapped.

Once the phone gets into the water, it means an internal short circuit and damage to the motherboard.

It is necessary to go to the manufacturer's after-sales maintenance office for inspection and replacement.

Don't go to the mobile phone repair shop on the street, they all accept second-hand mobile phone disassembly parts, and the service life and quality cannot be guaranteed.

Original parts are only available after the manufacturer's after-sales service. Don't believe in good quality and low price, any quality can only be guaranteed because of value.

If your phone gets into water and doesn't turn it off, it may freeze.

Spicy comment, maybe, he, will, will, eat? Quickly demystified? Why? Five.

Mobile phone liquid inlet treatment method:

1. Don't turn on the phone with your eyes open, forcing the phone to boot is likely to cause a short circuit in the phone;

2. Don't use He Xianli to shake the phone;

3. Don't heat up your phone;

4. To absorb the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the cracks of the mobile phone, and absorb the water in the mobile phone as much as possible in the first shot. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to inquire about service center information.

Legend vivo Y95 with inch 1520x720 waterdrop screen, Snapdragon 439 processor, 4GB RAM + 64GB ROM, 4030mAh battery, front 20 million + rear 2 million + 13 million dual camera, possible rear fingerprint recognition, based on Android system, Fu Lading stool hall line thousands of jujube yuan.

When your phone is flooded, if the phone is turned on, the water will seep into the circuit, which will cause a short circuit in the phone and cause damage to the motherboard. Therefore, when the control key is not out of order, it should be shut down directly.

First remove everything from the shell attachments that can be removed, and see how much water has entered.

If you remove the back cover and observe the battery and make sure that the water is not submerged inside, or only a little bit is visible, congratulations.

Now you just need to take a hair dryer, patiently and slowly dry the machine repeatedly, and finally install the case battery, and it's generally OK (reminder. It is best to blow cold air with cold air, hot air blowing in one place for a long time may cause the plastic to deform).

Step 1: Get your phone back. If your phone falls into the bottom of the toilet or bath, don't be stunned to get it out. The longer your phone is immersed in water, the more likely it is to be damaged.

Step 2: Remove the battery. Don't press any keys, and you don't need to turn it off, just open the back case of the phone and remove the battery. What if it's a phone like an iPhone that can't pry open the back cover to remove the battery? Then be careful to turn off the phone as soon as possible and cut off the power to prevent the phone from short-circuiting.

Step 3: Remove moisture. Remember, don't use a hair dryer to dry or bake on the stove, as the heat from the outside can damage the delicate electronics inside the phone. The correct way to do this is to wipe it quickly with a clean towel to make sure that water does not run into the charging port, headphone jack, etc.

If you find that the water has flowed down the connector or through the gap into the phone, carefully blow the water out with compressed air, and never blow deeper and deeper.

Step 4: Drying. Many people leave their phones in dry rice bags for 24 to 36 hours, or even longer.

This is indeed a simple, convenient and easy-to-operate emergency solution. However, this method has a number of drawbacks: if the water is adequately absorbed by the rice, the phone socket may be stuffed with slimy rice grains.

To be on the safe side, make sure to wrap your phone loosely in a paper towel before putting it in the rice.

1. It is recommended that you use a hair dryer to dry the cold air as soon as possible, and do not turn on the mobile phone to use it.

2. Or leave it to dry in the sun.

3. Take it to the local after-sales service center for testing and processing as soon as possible, where there will be relevant personnel to help you deal with it, please rest assured that the address of the after-sales service center and ** can enter the home page of the vivo official website - service - outlet inquiry - for inquiry.

Mobile phone service innovation expert Beebee has you covered:

If the battery is removable, the battery should be removed as soon as possible to reduce the corrosion caused by the liquid electrolysis reaction to the internal components of the mobile phone, and at the same time, it can also avoid the occurrence of the phenomenon of inability to charge due to the short circuit of the circuit and the empty battery. If it is not cleaned, the liquid will leave impurities attached to the components after the electrolysis reaction, and its electrical properties will be affected for a long time, such as leakage, etc., and in serious cases, the components or motherboard wires will be corroded.

The vivo Y927 can still be used if it falls into the water and is dealt with in time.

Let's talk about how to deal with it first.

The first water ingress must be turned off first to prevent the motherboard from being burned out;

The second is to dry the phone from beginning to end,Use a cotton swab to get the gap in and absorb it,The third is to put a paper towel or bag in the rice cylinder and seal it for 2 days,Let the water be absorbed and drainedThe above three steps are all things that Xiaobai should do,After all, vivo Y927It is a whole machine that can't remove the battery by itself,That's the only way to do it。

In fact, regardless of whether it is used normally or not, there is still water inside our mobile phones, and this water will definitely not be absorbed by rice so easily. Even if it is displayed normally now, the mobile phone is working with illness, and it may crash or even be scrapped at any time.

Therefore, be sure to take the water inlet machine to disassemble and clean it as soon as possible.

1. If the mobile phone falls into the water, immediately remove the battery and use a hair dryer to dry the water inside.

2. After the water is dried, wipe the circuit board of the mobile phone with an alcohol cotton ball, and turn it on immediately after the water is in, which will cause the circuit to be serialized.

3. In this case, disassemble the shell, wipe it with an alcohol cotton ball, wipe it clean to see if there are water stains and corrosion, and check whether there is a short circuit under the copper pieces of the battery, otherwise it is easy to burn the mobile phone circuit board.

Turn it off, put it in a rice bag and take it out for 2-3 days to use it normally.