You can t get on the Internet after a while

Then you try to change the crystal head (connect to the network cable of the computer), or change the network card to a different slot. If it doesn't work, it may be poisoned, enter safe mode and use 360 to kill it.

This should not be a hardware problem, it is recommended to reinstall the system (use Tomato Garden SP2 Magnum Clone King, only 10 minutes), do not rush to turn on the computer. Use a mobile disk to connect a 360 from another computer, then connect the computer and right-click on my computer, and remember not to double-click, open my computer, removable disk, find 360 and install it to the c drive, check and kill it.

The next auto kills.

Open the task manager and take a look at the network usage, CPU memory, etc.

It is estimated that it is poisoning, so let's kill it.

The parts that can be assembled are not compatible, or you consider reinstalling the system, first format it in full and then press the original press plate, instead of using ghost, this may be solved.

There are several reasons why I can connect to wifi but can't

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

2. The router may be overheated or damaged by the device in the road;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, resulting in some computers unable to connect to the Internet;

5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

3. Contact the broadband customer service to confirm whether the broadband account is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

The wifi signal is full of mobile phones, which is the possible cause of the inability to connect and the solution

1.First of all, check whether the DU wireless router is working normally, you can use other mobile phone DAO or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

The mobile phone signal is full, but I can't connect to the Internet, what's going on? Let's come in and take a look.

The full signal can only mean that the signal is strong, and the connection can only mean that it is connected to the router, and you just don't plug in the network cable, but the version gives the wireless routing authority a power supply and it can be connected. Therefore, the router must be set up correctly. In addition, don't say that everything is set up, and explain clearly how it is connected and how it is set up to judge the situation.

You can also refer to the simple setup of my space blog router.

I just got home and opened my phone to see that the network was not working, and it said that I had to log in, what was going on.

Wifi router or wifi on the cat?

If it's wifi on the cat

You need to dial up to use it, and the account password is your broadband password.

Please make sure that your wireless router is a primary router, and secondly, whether DHCP is turned on, if it is turned off, it will not be able to provide IP for the mobile phone, and it will naturally not be able to access the Internet.

My phone signal is full, and I can't get on.

The wifi signal is full of mobile phones is the possible reasons and solutions that cannot be connected: 1 First check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally. 2. The phone is turned on the sleep state, the network is turned off, the wireless network is connected, the signal is full, but the network cannot be connected.

Is the password wrong? It may also be that this router is set up with a static IP, you log in to the router with your mobile phone to see if you can log in (the IP address of the general router is:, if you can't log in, you must have set a static IP.)

How to display the wireless icon in the lower right corner of the computer desktop.

The image above is normal. Unhealthy is not connected.

Which of the above three is your display?

Big sister bai, you try to dial directly with the cat to see if it doesn't work.

du。Stun you. , you are connected to the router, but the DAO Internet is connected by the route to the cat, and then connected to the network. If you have no problem with the route, you will definitely be able to connect to the route. But your route is not connected to the network, and it is useless for you to connect to the route.

I've been dealing with the classification of computer common sense.,As a result, it's on the side of the problem.,Or deal with the problem of common sense.。。。。

What happens when the wireless network is full but you can't access the Internet? What should I do?

The two letters of IP in front of the account name must be filled in to be filled in, and this is how I solved it.

1. First of all, make sure that your router is not working normally, you can use other mobile phones or digital products to connect to the wifi hotspot, if you can connect and surf the Internet normally, then generally speaking, this wireless router can work normally.

2. Secondly, make sure that the mobile phone with a problem with the wifi connection does not have the option to turn off the network in the sleep state, and there are many children's shoes that their mobile phones will be disconnected after a period of time or can not receive the information of the background chat software, most of them are because they inadvertently or mistakenly turn on the option of turning off the network from the mobile phone.

3. Wireless router problem:

1) Dead cycle - many wireless routers sometimes have a connection into a dead loop, that is, they keep getting IP and connecting, but they can't connect to wifi hotspots. - Let's try the all-purpose fix - restart. After turning off the power of the wireless router completely, turn it back on again after about 10 minutes.

2) Whether there are too many WiFi connected devices - too many digital devices connected to the wifi of a wireless router will put a lot of pressure on the wireless router, and it is easy to cause IP conflicts and cannot be connected - such a problem can be solved by setting a static IP for each device connected through WiFi.

Now that you know how to enter the router, you can enter the router first, first reply to the router's exit settings, and then restart the router, click Quick Settings, select PPoe connection settings, and then fill in the broadband account and password, set the wireless security key, fill in the password, save it, and restart the router. After waiting for the router to automatically dial up, the following machines are set to automatically obtain IP and DNS and then surf the Internet, remember to set it according to the method I said, and don't move the other setting options of the router.

Take a look at your current IP configuration and check if it's correct!

You can set the IP address to be obtained automatically.

Please explain why I can't get on? Can QQ be on?

Check whether the status of the broadband cat is normal when the network connection is dropped, there is a DSL or whether the link light is always on, the DSL or Link light on the broadband cat indicates the communication status between your broadband cat and the operator's equipment room, it should be always on at normal times, if it is not bright or flashing, the biggest possibility is that there is a problem with your **line, directly call the operator's customer service** to report the obstacle and let people check and repair: Telecom 10000 Netcom 10060

If the broadband connection is frequently dropped, the solution is as follows:

1. If you use a router, disconnect the router for stand-alone dial-up test;

2. If you have a modem device, please pay attention to whether the device is overheated, and it is recommended to turn it off for a few minutes before restarting it.

3. If the connection is dropped when running the program alone (such as when playing games), it is recommended to restart the computer or reinstall the program;

4. Check whether the disconnection is caused by computer virus, and it is recommended to scan the whole disk;

5. If there is a server option for the running program, please select China Unicom.

If the above methods still cannot solve the problem of disconnection, you can contact the local manual customer service for feedback.