Is there any indoor cement floor ash treatment?

First clean the ground, try to have no floating ash, no debris, and then apply sealing curing agent to deal with ash and sand, the flatness of the ground will not change after the material is painted, and the material penetrates into the ground to form a hardened layer, hardening and wear-resistant, sealing and dust-proof.

Cement Remediation Specialist.

1. Spray the concrete sealing curing agent on the ground at low pressure, and then use a microfiber mop or soft hair broom to evenly distribute the materials, but pay attention not to use accumulated materials. 2. The ground will be kept in a moist state of 15 to 20, and then sprayed on the porous ground and the ground that has shown the area of absorbent material. When the material has hardened, do not use a microfiber mop or a soft-bristled broom.

3. Without affecting the elevation of roads and buildings, a layer of cement-based materials is added, such as self-leveling cement, fine stone concrete, etc. This is actually a remedy, and serious problems may require removing the original concrete and re-pouring the concrete. Mul.

4. Use thin layer materials to make up for it. For example, the construction of a layer of millimeter self-leveling cement, the use of polymer modified putty scraping, epoxy and other resin materials repair.

Resolve the bai

Method:

One, it is to mix.

Du concrete sealing curing agent is sprayed on the ground at low pressure

Then use a microfiber DAOWEI mop or a soft wool broom to distribute the material evenly, and avoid using accumulated materials!

Second, the ground will be kept in a moist state of 15 20, and then the porous ground and the ground that has shown the area of absorbent material will be sprayed at one time.

Third, when the material is hardened, do not use a microfiber mop or soft bristle broom.

Fourth, it is to pave a layer of cement-based materials, such as self-leveling cement, fine stone concrete, etc., without affecting the elevation of roads and buildings. This is actually a remedy, and serious problems may require removing the original concrete and re-pouring the concrete.

Fifth, it is made up for it by using a thin layer of materials. For example, the construction of a layer of 2 3 mm self-leveling cement is repaired with polymer-modified putty scraping, epoxy and other resin materials.

The easiest way to deal with ash on the cement floor is to use concrete sealing and curing agent. Concrete sealant can be rolled directly onto concrete floors. Concrete sealant curing agents are inexpensive and easy to use.

When using concrete sealing curing agent, it is necessary to grasp the order of construction, so as not to affect the final effect. The steps are as follows:

1. Spray the concrete sealing curing agent on the ground at low pressure, and then use a microfiber mop or soft bristle broom to distribute the material evenly, and avoid using accumulated materials.

2. Let the ground remain wet for 15-20 minutes, and then spray again on the porous ground and the ground in the area where the material has been absorbed.

3. When the material is hardened, do not use a microfiber mop or soft hair broom.

Causes of ash on the cement floor].

1. Cement is made of concrete, mortar, water, etc. stirring, mixing and drying, but when making cement floor, if excessive water is added, it will cause the water-cement ratio to be too large, which will cause ash on the cement floor, and if it is serious, it will also cause the phenomenon of sand on the cement floor.

Second, when we make the cement floor, we must calender the concrete surface many times, if we do not do this, it will cause the cement floor surface to be not strong enough, easy to ash, sand.

3. When we carry out any steps, we must grasp the time change, for example, when calendering the concrete surface, we must pay attention to the change of time, if the time is not well mastered, or calendering after final setting, do you know what kind of consequences this will cause? At worst, the concrete mortar layer is damaged, causing ash on the cement floor, and at worst, the cement floor is sanded.

Fourth, what should I do if the cement floor is dusted? In fact, there are many factors in the ash of the cement floor, including the low quality of the cement, which affects the quality of the cement floor, resulting in ash, sand and other phenomena, so we must use high-quality and high-quality cement when making the cement floor!

5. What should I do if the cement floor is dusted? In fact, the reason why the cement floor is dusted is that it is not properly maintained, and second, it is not properly made, so it will be ashed. In order to avoid the phenomenon of dust on the cement floor, you can maintain it regularly!

Generally speaking, the internal structure of the BAI cement ground is particularly loose, and the void is relatively large, pour a glass of water on the surface of the DAO concrete inner soil, which may soon be completely infiltrated, so the ordinary cement floor sand and ash is a headache, and the use of concrete sealing and curing agent can completely solve the problems of cement floor sanding, cement floor ashing, and poor cement floor strength. If you want to have a better aesthetic degree for curing construction, the ground after curing construction will not only not be dusted, but also wear-resistant, dust-free, compression-resistant, with a certain mirror effect, a service life of more than 25 years, and simple maintenance - only need to mop the floor with clean water.

1. If the new cement floor is not very serious, you can buy concrete reinforcing agent outside for painting, and you can paint it 2-3 times, and the cost is 10 yuan square meters, which is very cheap compared to the construction team outside.

2. If the ash of the newly made cement floor is very serious, then it must be polished with special machinery, and then hardened with concrete reinforcing agent, and then polished. The cost of doing this will definitely be relatively high, because it involves a construction fee, as well as the consumption of machinery and consumables.

3. For the ash of the old ground, you can use the ground sand and dust treatment agent for hardening, and you can buy materials for painting on the market by yourself, but the material efficacy of each company is different.

4. If the ground ash is very serious, you can re-pour the concrete floor, and then make the emery floor or the concrete reinforcing material floor, or the epoxy floor, but the concrete reinforcing agent floor is more wear-resistant and durable than the epoxy floor, and the cost is also lower.

The method of preventing sand and ash on the cement floor can generally be made of wear-resistant floor, epoxy floor, concrete sealing curing agent floor, but the construction is relatively long, and professional construction personnel are required to contract labor and materials, and the cost is relatively high, such as the wear-resistant floor needs to be done when pouring concrete, and the cement floor that has been done cannot be made wear-resistant floor; The construction steps of epoxy floor are more cumbersome, the construction period is longer, and the dustproof effect is better, but once the skin is peeled and damaged in the later stage, it is more troublesome to maintain; Curing agent floor is a cost-effective product, but if the material used is not good or the concrete itself has the phenomenon of sand and ash, there may still be the possibility of sand and ash in the later stage, and it has no color, which is to polish the concrete surface reinforcement.

1. According to the quality of the ground, the severity of the ash is not the same, mainly showing the low compactness of the ground, not wear-resistant, loose and other problems, the simpler treatment method is to paint the cement concrete sanding treatment agent, the operation is simple, the effect is obvious.

2. If the ground ash is serious, the problem can not be completely solved by painting JR-1 cement concrete sanding treatment agent, and it is necessary to use JR-3 cement concrete repair agent cement and sand to cover the ground and make a new surface layer to completely solve the problem.

3. If it is an old ground, it can be painted with cement concrete sanding treatment agent; If it is a new ground to prevent ash on the ground, it can be treated with a cement hardener (cement curing agent) material.

If the process quality of the cement floor is not up to standard, it is easy to cause ash. What are the treatment methods for cement floor ash? PChouse will take you to find out.

1. If the dust on the newly made cement floor is not very severe, you can purchase concrete reinforcing agent outside for painting, and you can paint 2-3 times, and the cost is 10 yuan square attitude, which is very cheap for the construction team outside.

2. If the ash on the newly made cement floor is very severe, it is necessary to use special machinery for grinding treatment, and then apply concrete reinforcing agent for hardening treatment, and then polish treatment. The cost of doing this will definitely be relatively high, because it involves a construction cost, as well as machinery, and the consumption of consumables.

3. The ash on the old ground can be hardened by using the sand and dust treatment agent on the ground, and the data can be purchased by themselves in the market for painting, but the data effect of each company is different.

4. The ash on the ground is very severe, and the concrete can be poured from the beginning, and then the emery floor or concrete reinforcing agent floor, or epoxy floor can be used, only the concrete reinforcing floor is more wear-resistant than the epoxy floor, and the cost is also lower.

1. Pure cement repair: only a small area of ash, can be repaired with Portland cement. 2. Cement repair mortar:

If there is only sand on the ground, cement repair mortar can be used, the repair speed is fast, and it can be used one day after repair. 3. Pavement sanding treatment agent: This is a special repair material, with good repair effect and high strength.

How to renovate the cement floor.

Step 1: Remove grease.

If the cement floor is dirty, such as dust, oil, etc., then before construction, it is necessary to clean up the dust and oil on the surface, and then start degreasing and degreasing to ensure that the surface is clean and clean.

Step 2: Crack treatment.

Cracks often occur on the cement floor, if you encounter this situation, you can use a cutting machine to groove the cracks first, and then pour cement into the cracks to make the cracks smooth.

Step 3: Pothole treatment.

In addition to cracks in the cement floor, there will also be potholes, if this is the case, first use a grinder to polish the potholes, the ground hollow drum grinding flat, and then fill the whole with mortar.

Step 4: Coarsely grind the ground.

Coarse grinding of the ground is also an important step of renovation, you can use diamond pieces for coarse grinding, pay attention to the uniform grinding during operation, and finally use a vacuum orange eggplant to clean up the dust on the surface.

Step 5: Apply cement curing agent.

After rough grinding, it is necessary to apply the cement curing agent, spray the curing agent on the cement floor, and ensure that the coating is uniform and fully penetrates into the cement floor.

Step 6: Finely grind the floor.

Finally, after the cement floor is completed, the ground needs to be finely grounded, which needs to be ground with 500 resin dry grinding discs, and it is necessary to grind many times until the ground is as bright as the stone surface.

Summary of leakage Wu Sui: The above is about how to deal with the ash of the cement floor, I hope it will be helpful to everyone! The construction of cement floor needs to be constantly renovated, and it is also necessary to pay attention to maintenance after construction, otherwise the ground is prone to cracks or ash.

We should pay attention to a lot of problems when decorating, we have seen a lot of cement floor, although there are many advantages of cement floor, but there are also disadvantages, I will talk about it nextCement floor ash treatmentand the reason for thisCement floor ash treatmentmethod.

1. The ratio of water and cement is too large: When the construction land is leveled, the workers have too big a problem in terms of mixing ratio. If you adjust the normal ratio, it's basically 4:

1；If more water is used, the strength of the cement floor surface will be reduced and lost, and even mortar seepage will occur, which will reduce the strength of the cement surface again; It is prone to ash.

2. Secondly, there is a problem with the quality of the cement itself. In addition, the sand grains are too thin and both cause the surface layer to be insufficient in water, which leads to ash content.

1. Clean the floor.

First, we want to remove the dust with a brush, then rinse the floor with water, then find the space or well, the cement is mixed with glue in the putty, and then the repair effect can reach the same level.

2. Brush the floor with glue.

Cement floor ash treatmentShake the rubber finch in a ratio of 1:2 to shout water and water, then apply the soil. If the ash content is severe, it is recommended to brush the entire surface to carry out the effect of the interface agent, which can improve the cement putty and floor surface.

3. The cement putty should be layered and scraped off.

For good results, it is recommended to scratch 3-4 times, each time controlling the thickness of the coating to. One thing to keep in mind here is that the ratio of the lower putty layer should be controlled: cement: 108 glue: water = 1: :

4. Room temperature control.

Cement floor ash treatmentDuring this period, the ambient temperature must be strictly controlled to prevent the temperature from adversely affecting the construction effect. Therefore, it is not recommended for everyone to work in winter. Because, when the ambient temperature is below 10, the glue is prone to freezing and is not possible in dose.

In order for the glue to melt under natural conditions, it is important to control the temperature to the point where the deficit is critical.

You can get it for free

1. First of all, we can sprinkle some water on the cement floor every messy day, so that the dust cannot fly into the air, but if it rains, the ground is not easy to dry after sprinkling, and the room will become very humid.

2. Painting a layer of paint on the cement floor can also effectively prevent ashing, but because many paints contain formaldehyde, many friends are not at ease, so they should choose safe and pollution-free paint before purchasing, and you can wait for a period of time after brushing before moving in.

3. We can also lay carpets on the cement floor to isolate dust, which can not only prevent dust, but also play a decorative role.