What is the difference between airless spraying 617 and 517 nozzles

It is the size of the nozzle, 5 and 6 represent the width of the spray, and 17 represents the flow rate.

A good spray pattern is when the paint or paint is completely atomized and sprayed onto the surface coating.

Several factors and methods to help determine the quality of spray pattern and spray quality. The method consists of a gun that makes pressure from the regulator to determine the spray pattern.

Spray Pressure Regulator - Preferably at the lowest pressure at which the painting can be fully atomized. It should be moved to where the low pressure controller will start, and then slowly increase the pressure until the paint is completely atomized. If the pattern refers (more pronounced thick lines) or caudal (blurred edges), it should raise the pressure.

China Note: If the maximum pressure sprayer still does not achieve the ideal spray pattern, it should be a smaller size nozzle.

Calibrated Spray Pattern - The gun sprays the surface at the farthest distance of 12 inches (cm) and is arranged upright (both vertically and horizontally). Tilting the gun in any direction will result in an uneven coating thickness.

Spray along the surface with a hand-held spray gun, and the crew must always bend your wrist to keep the gun straight for the painted surface. As with any swinging from side to side, the gun will cause an uneven coating thickness.

Pull Technique Trigger - Trigger Stop Release Trigger Trigger Before Movement The gun should be moved. When the trigger is pulled and the trigger is released, the gun should remain panned. This method prevents the accumulation of start and end points in the paint.

The model of the nozzle. (The first digit represents the spray amplitude, the larger the number, the wider the spray amplitude, and the last 2 digits represent the flow rate, the larger the number, the larger the flow rate), the spray amplitude of these nozzles is the same, but the flow rate is different. Their spray width is 250mm-300mm, but the flow rate is different, respectively, the flow rate of 17 is min, the flow rate of 19 is min, and the flow rate of 23 is min.

The caliber is the same, 617 is 30 cm wide, 517 is 25 cm wide, and the width is different.

The difference between the width of the spray width and the size of the flow, what kind of paint to spray and what kind of nozzle to choose, different models of different machines spray, the effect is not the same, it is best to ask the manufacturer how to match it perfectly.

The flow rate is the same as that of latex paint, and the width is different.

The internal structure consists mainly of a supply device, an atomization device source and, of course, a spray gun. Moreover, the source of atomization is not the same as that of the injector, so there is a significant difference in the usual function: the atomization of the air sprayer is composed of multiple appliances.

Precautions: putty spraying machine is a small machinery for stirring, pumping and spraying high-quality putty powder, and it is a kind of putty spraying machine among the spraying machines, mainly spraying various decorative putties produced at home and abroad, among them, such as 100 mesh paint with a mixed air spray gun can achieve atomization effect.

The daily spraying area can reach about 1500 square meters, which is suitable for house protection, painting, bottom slurry, etc.

Advantages of using a putty sprayer:

Clause. 1. Simple, before scraping the putty, we can use a blender to complete the putty, which is both uniform and moderately viscous, and the effect is much better than manual stirring.

Clause. Second, the spraying is fast, if you use putty spraying machine, it only takes a few minutes for a wall to be sprayed, and if the construction operation is carried out, the progress will be much slower.

Latex paint with 617 spray paint of your model can.

Can the nozzle of the 517 paint spray machine gun cover those sandpaper marks?

This type of nozzle is generally used for spraying paint.

Dear, hello, I am glad to answer for you the nozzle of the sprayer 517 and 625 that big answer: the nozzle of the sprayer 625 is larger pin orange. The commonly used nozzle model of the spraying machine is 517-519-521-525-527-529-617-619-621-625-629.

1. The sprayer nozzle refers to the size of the nozzle.

The number represents: (5) indicates the spray width of n 5, that is, the spray width is 25 cm. (17) indicates that the caliber of the nozzle is inches, i.e., millimeters.

3. The first digit represents the spray amplitude, the larger the number, the wider the spray amplitude, and the last 2 digits represent the flow, the larger the number, the larger the flow.

Summary. Glad to serve you what is the difference between 641 and 541 nozzles.

The storage pressure in the fire extinguishing agent bottle group is 15MPa, and the nozzle will spray high-pressure gas when the system operates, which may cause damage to people or objects near the nozzle541 "The minimum density of the nozzle is close to the air, and the working pressure when the tail nozzle is released, it can quickly mix with the gas with external diffusion after spraying, and quickly reduce the CO2 concentration value to extinguish the fire) Ig541 is stored in a gaseous state and sprayed in a gaseous state, which will not cause the temperature in the protective area.

What is the difference between 641 and 541 nozzles.

Glad to serve you What is the difference between 641 and 541 nozzles The storage pressure of the fire extinguishing agent bottle group is 15MPa, and the nozzle will spray high-pressure gas when the system is operating, which may cause damage to people or objects near the nozzle 541 "The minimum density of the nozzle is close to the air, and the working pressure is high when the nozzle is released at the end of the reed, and it can quickly diffuse and mix with the gas after spraying, and quickly reduce the CO2 concentration value to extinguish the fire) IG541 is stored in a gaseous state, It is sprayed in a gaseous state and does not cause temperature in the protected area.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

The simple meaning is that your three models, the spray width is the same, and the last two digits have a large amount of paint, that is, a little thicker.