How to open the 3d of apple 6splus

1. The operation steps are the same for 6S and 6S Plus, first find [Settings] on the home screen of the phone and open it;

2. This function is hidden in the [General] coarse, open [General];

3. After opening the interface of the general settings, there is a [Accessibility Function] in it, turn it on;

4. After opening the accessibility interface, pull down the page, and in the middle position, you will find the 3D Touch function, behind the 3D Touch, there are two words "open", that is to say, the current 3D TOUC is open, and the mobile phone you just bought is generally on the open;

<>6. After opening, we can condition the sensitivity of 3D Touch, if you want to use less force, you can adjust the sensitivity to "weak", if you want to use hard force to react, adjust the sensitivity to "strong", and the wheelstool will stare at your preferences;

7. If you want to feel the difference between strong, medium and weak Lingwax and sensitivity, you can perform a 3D Touch sensitivity test;

8. Press ** with your fingers, you can feel the change, you should press it with your fingers all the time, the strength changes from light to heavy, and then see what changes there are, and then decide the sensitivity of 3D Touch;

Tool: iPhone 6plus

1. Find the "Settings" option on the desktop of your phone and click to open.

2. Find the "General" option in the settings interface and click Open.

3. Find the "Accessibility" option in the general settings interface, and click on Mori Youkai.

4. Find the "3D Touch" option in the auxiliary dust function and click to open.

5. In the 3D Touch interface, find the switch on the right side of the 3D Touch and turn it on.

Open Settings - Go to General - Enter Accessibility - Enter 3D Touch (i.e. 3D Touch) - Turn it on.

The specific steps are as follows:

1. Open Settings.

2. Enter the general purpose.

3. Enter the accessibility function.

4. Enter 3D touch.

5. Turn on 3D touch.

Step 4. 2: Select the General option: Select the Accessibility option. The third step is that you can use. Step 5.

Tool: iPhone 6plus

1. Find the "Settings" option on the desktop of your phone and click to open.

2. Find the "General" option in the settings interface and click Open.

3. Find the "Accessibility" option in the general settings interface and click Open.

4. Find the "3D Touch" option in Accessibility and click Open.

5. Find the switch on the right side of 3D Touch in the 3D Touch interface and turn it on.

Open Settings - Go to General - Enter Accessibility - Enter 3D Touch (i.e. 3D Touch) - Turn it on.

The specific steps are as follows:

1. Open Settings.

2. Enter the general purpose.

3. Enter the accessibility function.

4. Enter 3D touch.

5. Turn on 3D touch.

Can't look at it.

Stereoscopic cinema is a type of cinema, and on May 24, 1953, stereoscopic cinema first appeared, and Hollywood introduced a kind of cinema. Viewers with special glasses find themselves hiding behind fleeing trains and devils, as in thrillers like "The Devil of Bovana" and "The Wax House". Thus bringing us into the era of stereoscopic films.

On September 10, 2015, Beijing time, the iPhone 6S Plus was released. In addition to the original gold, silver, space gray and rose gold (pink), the screen is made of high-strength ION-X glass, the processor uses A9+M9 processor, the CPU performance is 70% higher than A8, the graphics performance is increased by 90%, the rear camera is 12 million pixels, and the front camera is 5 million pixels.

In terms of data connectivity, it supports LTE networks in 23 frequency bands and WiFi connections with twice the speed. It was released on September 25, 2015.

Apple iPhone 6Splus uses a 12 million pixel iSight camera, the sensor has a single pixel size of the photosensitive area of microns, such a size can still ensure the quality of the picture, iPhone6Splus is still better than iPhone6Equipped with optical image stabilization function, the aperture is still F. Apple said that the iPhone 6Splus will have faster focusing speed and better image capture capabilities.

Tool Material: Apple 6splus

1. Find the settings in the phone screen and click to open this setting.

2. Then find the general option in it, click to enter.

3. Once you're in, click on Accessibility to jump to the next page.

4. You can see the 3D Touch function on this page, click to enter.

5. Finally, turn on the 3D Touch function.

Apple 6splus setting 3dtouch method: Settings - General - Accessibility - 3D Touch - On - Adjust Sensitivity - Complete the sensitivity test.

1: Tap Settings and open it.

2: Select the generic option.

3: Click Accessibility.

4: Tap 3D Touch.

5: Turn on 3D Touch.

6: Its sensitivity can be adjusted.

7: After the adjustment is completed, the sensitivity test can be carried out to complete the setting.

This doesn't need to be set, you're in any ** or **.

Long press the screen to feel the function of 3D-Touch.

Settings - General - Accessibility - AssistiveTouch 1, under the main menu interface, click [Settings].

2. Open [General] in the settings interface

3. Find [Accessibility] in the general interface and open it.

4. Find [AssistiveTouch] and open it.

The Apple 6 Plus does not have 3D features, probably not set up well.

The specific operation to set up the 3D function of Apple 6 Plus is as follows:

1.First, find [Settings] on your phone's home screen;

2.Open [General];

3.After opening the interface of the general settings, there is a [Accessibility Function] in it;

After touch, there are two words "open", indicating that the function is enabled;

The 3D function only supports products above 6S, 6 and 6P are not, now it is 6S, 6SP, 7, 7P have 3D function, friend.