-
The longevity flowers in the greenhouse do not germinate because the temperature and humidity are not enough, and the light is not enough, and the longevity flowers prefer sunlight.
-
Temperature: Kalancho is succulent, but unlike other succulents of the Sedum family, it is not afraid of heat, so there is no need to worry about high temperatures, but it is necessary to water less when it is hot, otherwise it is easy for the root system to rot. If the longevity flower wants to bloom later, there must be enough branches, and the subject of the longevity flower can be topped at this time to promote the development of side branches.
The lateral branches will be more abundant, and there will be more flowering branches later. After changing the pot, put it in a cool place for 1-2 weeks, and put it in a sunny place for maintenance. After the slow seedling period, it is necessary to supplement fertility, and it is best to use compound fertilizer based on phosphorus and potassium to promote the vigorous growth and flowering of longevity flowers.
If you apply more nitrogen, you will only grow plants, and there will be few or no flowers.
<> room temperature of 27 degrees, which is significantly higher than the maximum temperature of the longevity flower, so the longevity flower should have been dormant, so it will not grow for several months. Longevity flowers are short-day plants, which need to be exposed to the sun properly and should not be kept indoors for a long time. Basking in the sun through the glass blocks most of the ultraviolet rays, and in the long run, the longevity flowers will grow.
Poor permeability. The soil is not loose, the basin is not breathable, if it is a plastic basin, it is good to pinch it with your hands. Only when the capillary root (as shown below) is developed, it has the ability to absorb water and nutrients, and it will flourish and bloom.
During this period, the longevity flower fully enjoys the sun's ultraviolet rays, prevents root rot and restores its natural nature to grow in the wild. If this is repeated, the longer the longevity flower will grow, the better. Experience, 1 is the soil.
2. It is properly placed outdoors. Hope it helps. Longevity flower fertilization is generally carried out in spring and autumn during the vigorous growth season and after flowering.
Generally, thin liquid fertilizer is applied once every half month, and after the flower buds are formed, potassium fertilizer can be added to promote flower blooming. Stop fertilizing at low temperatures in winter. Nitrogen grows leaves, phosphorus grows flowers, and potassium promotes fruit and roots!
Lack of nitrogen fertilizer, small leaves, not green and dull. Lack of phosphorus fertilizer, few flower buds. Potassium deficiency fertilizer rhizomes and branches are thin.
Appropriate supplementation of potassium dihydrogen phosphate can solve the problem of light flower color and small flowers.
-
Longevity flowers do not have high requirements for fertilizer, and if they do not grow for a few months, if they exceed five or six months, they can also rule out the problem of high temperature in summer. If the seedlings are stiff, it may be fertilizer. Get it out, wash the roots, repot, or even cut off the waist and re-insert it, but it may not necessarily die.
-
Sheep manure should be used, these fertilizers are very good, and can increase our yield, so that the flowers grow more beautifully.
-
Potassium fertilizer, nitrogen fertilizer, and phosphate fertilizer all contribute to the growth of longevity flowers. A certain amount of bone meal can also be applied.
-
You can choose to apply some compound fertilizers, or you can choose phosphate and nitrogen fertilizers. The effect is very good, and it also promotes growth.
-
Use chicken manure or cake fertilizer as base fertilizer, base fertilizer is very important, and it depends on this to continue to open. Then water the flowers once a week with "potassium dihydrogen phosphate", and you can also use it to spray longevity flowers to supplement foliar fertilizer when you have time. "Potassium dihydrogen phosphate" is a supplement to phosphorus and potassium fertilizers, which is very helpful for flowering.
-
It is best to use nitrogen fertilizers when growing plants, such as urea, which is very suitable for use at this stage.
-
After the longevity flower buds, if only 2-3 buds are first, you need to pick it first. This not only avoids different bud sizes, but also promotes the blooming of long-lived flowers into flower clusters, which can increase the number of buds and become a potted flower when they grow. Longevity flowers, like crab claw orchids, must have enough light after flower budding, and if they are too hidden, they may drop flower buds and not bloom.
The light is weak in winter, so you can give it full-time light, and the longevity flowers can bloom very well, the flower stems are also hard, and the flowering period becomes longer and blooms uninterrupted.
The most suitable temperature for the growth and flowering of kalanthus is 15 to 25 degrees Celsius, and in spring it is necessary to prevent the effects of sudden cold snaps such as spring cold, otherwise it will lead to buds and buds of kalancho flowers. Longevity flowers should stop applying all nitrogen fertilizers at the gestational bud stage, but mainly phosphorus and potassium fertilizers, such as potassium dihydrogen phosphate, must flowering flowers, narcissus is an autumn bulb greenhouse flower, it likes full sun, has tenacious vitality, can withstand semi-shade, and is not cold tolerant.
Secondly, as far as I know, the leaves are dormant from July to August, and the flower buds are differentiated at the bulb growth point during the dormancy. It has the physiological characteristics of autumn-winter growth, early spring flowering, and summer dormancy. Narcissus loves light, water, and fertilizer.
Suitable for warm and humid climatic conditions and fertile sandy soils. It is cool in the early stages of growth, slightly cold in the middle stage, and warm in the later stages. Therefore, it is required that there is no severe cold in winter, no scorching heat in summer, and no rainy climate in spring and autumn.
The flowering period of longevity flowers is very long, and the time from flower buds to full bloom is also very long, sometimes as long as two or three months, these two or three months are called the pregnant bud period of longevity flowers, and the pregnancy bud period requires sufficient light, suitable temperature, and reasonable application of phosphorus and potassium fertilizers, therefore, after the buds of longevity flowers grow, you can't give it shade, but you need to give it plenty of sun. Kalancho is obviously a plant that likes sunlight, and it has a long flowering period, so it is called kalancho flower. It's winter and we have to make sure that the temperature at which it grows is not too low, usually around 10 degrees is best.
-
Longevity flowers must be well maintained, and the sun must be moved out in time. No matter what kind of plants you raise, you have to put a certain amount of thought into yourself. There may be some problems in the process of longevity flower maintenance, but don't be too careless.
Kalancho flowers need plenty of sunlight, so if they can't be placed outside the windowsill, they need to be adjusted in time. You will be very excited to see the longevity flowers blooming, but don't touch them. If you can bask in the sun for less than 10 hours a day, the flower buds will become more and more numerous.
Everyone should fertilize the longevity flowers reasonably, so that they can be applied in turn. Do not spray fertilizer on the flowers, it will easily cause the death of the flowers. After the proportions are blended, then go to fertilizer, and beautiful flowers will bloom.
Longevity flowers will accumulate a lot of nutrients, so that they will bloom so brightly forever. Don't choose to make some bad fertilizers yourself, longevity flowers will not grow vigorously after absorption. You must be careful in the management of longevity flowers, and you must think about it for longevity flowers.
Each type of longevity flower is different, and you are also responsible for the longevity flower. The buds of longevity flowers are different from other buds, and there are many things that branch. Some people feel that the longevity in the home is messy, and it is also because they have not pruned it in time.
Place the kalancho in an open area and allow it to spread. It's also nice to have greenery inside, so you can enjoy it when you're fine. If you have a large terrace at home, you can also create a garden for yourself with a variety of flowers.
In general, longevity flowers are relatively easy to raise, and you don't have to spend so much effort on your own. When you have nothing to do, you can also take a look at the maintenance of longevity flowers and see how others are doing these things. If you don't have time, don't choose to buy longevity, and after spending a long time, it may also wilt.
-
Watering, fertilizing, basking in the sun, ensuring sufficient sunlight, ensuring that the sun is shining, applying flower fertilizer; I think it is necessary to shade the flowers to avoid damage from the sun.
-
The soil should be renovated, maintained according to their own breeding experience, and watered regularly, and when maintaining, be sure to pay attention to the method. It is necessary to block out part of the sun.
-
There are three things to be aware of that can increase the survival rate of your cuttings:
1. The cuttings you use are too delicate and not mature enough, and the flower pot is the kind of material with poor water permeability and air permeability, which is easy to cause rot. In the future, it is necessary to pay attention to the control of watering amount.
2. Cuttings fleshy or delicate branches, try not to use scissors, scissors will squeeze the edge of the cut, causing the branches to be injured and slow rooting, it is best to use a sharp blade to cut off at one time, the smoother the cut surface, the easier it is to survive.
3. There are too many leaves left on the paper strip, and the root system has not yet grown, and the water is transported slowly upward, and the leaves will increase the amount of water evaporation and increase the nutrient and water supply of the branches. Now the top leaf needs to be removed, leaving only one piece.
-
Longevity flowers are very good to raise, pick a leaf and throw it that can grow a small seedling, there is no pot for the time being, throw that for a few days are fine, but pay attention not to water too much, it doesn't matter if you are dry, and then pay attention to the sun and wind more, otherwise it will be barren, and the flower seedlings are delicate and do not bloom much.
-
A 10---15 cm tile pot should be used, as such a large plastic pot is prone to root rot. If there is fertilizer in the soil, it is even worse, and plain soil should be used.
-
Plenty of light. There must be enough sunlight, but the daylight hours should not be too long. It is enough to have about 6 hours of light every day, not longer than 10 hours, otherwise it will affect its flower bud differentiation and greatly reduce the number of flower buds.
Be sure to give it plenty of light after the longevity flower buds, preferably for 4 to 6 hours. If the light is insufficient, the buds are easy to dry up and turn yellow, resulting in less flowering or no blooming. Therefore, after the bud emerges, be sure to put it in a sunny place.
I put the longevity flowers on the sunny south balcony, there is heating in the north room, first of all, it can't freeze, and then at noon, as long as there is time, I open the window to ventilate, whether there are buds or not, ventilation is important.
<> kalancho flower is obvious, this is a plant that likes sunlight, and its flowering period is particularly long, so it is called kalancho flower, so now that it is winter, we must ensure that its growth temperature is not too low, usually around ten degrees is the best. After the longevity flowers have flower buds, it is best to keep the potting soil dry and water it every day or two after it is dry. Watering too often can easily accumulate water, which can easily cause flowers and buds.
And this time is relatively dry, in order to keep it moist, you can spray some water mist appropriately, longevity flowers out of flower buds, and pregnancy is almost the same, as long as according to the usual maintenance method normal maintenance, no need to deliberately do anything.
Two large watered Coke bottles, one is water, once a week, spray potassium dihydrogen phosphate, and the other is water soaked in compound fertilizer, one stubble of water and one stubble of fertilizer. He likes to be warm in winter and cool in summer, and is afraid of high temperatures in summer and cold in winter. The most suitable temperature is around 18 degrees Celsius during the growing season, and the lowest temperature is around 10 degrees Celsius.
After October until before flowering, ventilation and light should be strengthened so that the flowers can bloom longer. In addition to using our home-made humus, we should also add some well-rotted cake fat fish bone meal, etc., and try to stir evenly to facilitate the absorption of nutrients by the roots of longevity flowers.
-
The flowering period of longevity flowers is quite long, and the period from the time it emerges to the full bloom of the flower bones is also very long, sometimes as long as two or three months. These two or three months are called the pregnancy bud period of longevity flowers, in which sufficient light is needed, there is also a suitable temperature, and reasonable phosphorus and potassium fertilizer is also needed. Therefore, after the longevity flower has flower buds, it must not be shaded, but it needs to be given sufficient sunlight.
-
Of course, it needs to be shaded, if the sun is exposed, the flower buds will wither quickly, and in the sunny weather, not only should be shaded, but also watered frequently to cope with leaf transpiration.
-
No, you don't. After the flower buds grow, they should not be shaded, but they should be raised in a sunny place so that the flowers can open as soon as possible, and plants need photosynthesis, so they do not need shade.
-
The flowering period of longevity flowers is relatively long, which also belongs to the pregnant bud period of longevity flowers, which needs sufficient light and cannot be shaded.
-
A: Yes, because the flower buds at this time are still relatively fragile and cannot withstand the sun's exposure, for this, I think shading is necessary.
-
It should not be shaded, and at this time, it is necessary to have sufficient sunlight to grow faster.
-
The longevity flowers have just opened, so deal with them immediately, and the flowering period is longer than others.
-
Longevity flowers are very popular plants, but many people can't keep them blooming, why is this?
-
Reasons why longevity flowers do not bloom:
1. Light: Longevity flowers like a sunny environment, avoid strong light exposure at noon in midsummer, and place it in a sunny place for the rest of the time, and at least 4 hours of direct light can be seen every day to grow robustly. In order to make the longevity flower plant bloom evenly, attention should be paid to changing the direction of the flower pot frequently, so that the plant receives light in a balanced manner, and the balcony of the building should rotate the flower pot 180 degrees every half month.
Although it can also grow in the semi-shade, the stems are thin and the leaves are thin, the flowers are few and the color is light, and it is far less lush than the sunny place. If it is too shady, it is not only easy to lose the leaves and no flowers, but also if the flowering plants are placed in the shade, the flower color will become dull, and then the flowers will fall off and wither.
2. Fertilizer nutrients: longevity flowers like fertilizer. The flowering period of longevity flowers is long, and it is necessary to break the precept of not fertilizing during the flowering period, and apply thin nitrogen, phosphorus and potassium fertilizer or % potassium dihydrogen phosphate solution once a month, so that the later flowers will not become smaller and lighter due to lack of fertilizer.
From the time the longevity flower frost is lowered into the room to October of the following year, it is the late differentiation and flowering period of the longevity flower buds, so there is a great demand for fertilizer. Anabageny fertilizer with phosphorus and potassium should be applied once a week before flowering to promote the differentiation of flower buds. The flowering period is mainly applied with fast-acting potassium dihydrogen phosphate, and the concentration is 2%, once every 10 days.
Longevity flowers bloom several times a year:
Longevity flowers like warm, slightly humid and sunny environment, not cold-tolerant, the growth temperature is 15 25, the summer high temperature is more than 30, the growth is stunted, and the indoor temperature in winter needs to be 12 15. Below 5, the leaves are red and the flowering period is delayed. In winter and spring, if the room temperature exceeds 24, it will inhibit flowering, such as the temperature is about 15, and the longevity flowers will continue to bloom.
Longevity flowers are drought tolerant, do not have strict requirements for soil, and are preferable to fertile sandy loam soil. Longevity flowers are short-day plants and are sensitive to photoperiod responses. Plants with good growth and development can appear with flower buds and flowering after 3 to 4 weeks of short day (8 to 9 hours of light per day).
Therefore, the flowering period of longevity flowers is from December to May of the following year, as long as they are well maintained, they will continue to bloom beautiful flowers during this time.
Longevity flower cuttings in spring and autumn are the best and best. >>>More
Longevity flowers are very popular plants, but many people can't keep them blooming, why is this?
Just 20 points, you just want a formula, you are so funny, you can buy dipping anthers on the market, but the real formula will not tell you! I'll teach you a little more!
The temperature in the shed is variable, and although it varies regularly, it is very difficult and unrealistic to determine the temperature at all points. However, if it is specific to a certain point, the temperature of the shed is very easy to determine, and from the temperature of this one point, we can deduce the approximate temperature of other points. >>>More
Do you use an electric whisk or manual for egg beating? Are the egg whites beaten separately or together? I guess you have a problem with the eggs! Whipped egg whites are very important!